ADF4111BRUZ-RL7 - 1.4 GHz Integer-N PLL | Analog Devices
MPN: ADF4111BRUZ-RL7 ✓ 啟用中ADF4111BRUZ-RL7 概覽
A phase-locked loop, or PLL, is a frequency-control system in which a voltage-controlled oscillator is phase and frequency locked to a stable reference. An integer-N PLL divides the feedback frequency by an integer, making it particularly useful for RF channels requiring a rational relationship between the reference oscillator and output carrier. The ADF4111 belongs to the broader clock-and-timing IC hierarchy, where it combines a digital phase-frequency detector and programmable frequency dividers with an analog charge pump for driving an external voltage-controlled oscillator loop.
The principal features include a 1.4 GHz maximum frequency rating, a programmable dual-modulus prescaler, a 6-bit A counter, and a 13-bit B counter according to the Analog Devices family description. A programmable reference divider supports use with reference frequencies that require division before comparison. The architecture also includes a low-noise digital phase-frequency detector and a precision charge pump, allowing the loop bandwidth, phase noise, and lock behavior to be shaped through the external loop filter and reference design.
Operationally, the charge-pump output drives an external loop-filter network connected to the VCO. The reference signal and divided feedback are compared by the phase-frequency detector, and the charge pump produces a correction current that adjusts the VCO control voltage until phase and frequency lock are achieved. Because this is an integer-N architecture, the programmable feedback division ratio is an integer, so the achievable output frequencies are constrained by the relationship between the reference frequency, reference divider, and integer feedback divider.
The ADF4111 is suitable for wireless local-oscillator and frequency-conversion applications, including receiver and transmitter up-conversion or down-conversion paths. It can also support instrumentation, test equipment, and other RF systems requiring programmable frequency generation with a fixed or controlled reference. Designers must select the prescaler, counter values, reference divider, charge-pump current, and loop-filter components to satisfy the required channel spacing and phase-noise performance.
A critical design consideration is loop stability. The passive components connected between the charge-pump output and the VCO control input determine loop dynamics, reference-spur behavior, and lock range. PCB layout should keep the charge-pump and loop-filter paths compact, provide a stable ground reference, and isolate noisy switching nodes from sensitive feedback and reference routing. High-frequency signal routing also requires controlled impedance and short return paths.
This page combines the exact orderable MPN, verified package and frequency information, practical PLL design guidance, source-backed technical context, and application-specific selection criteria. It is intended to help engineers identify the correct Analog Devices frequency synthesizer, plan its loop filter, assess package-level implementation, and determine whether a listed same-family device is suitable for an existing 16-lead TSSOP design.
直接替換替代品,適用於 ADF4111BRUZ-RL7 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: ADF4111BRUZ-RL7 (相同外形與佔位) — 差異在於 Prescaler, Package, Product Type, A Counter, Package Length.
ADF4110BRU-REEL
✅ 直接替換聯絡詢價
查看資料表 →ADF4113BRUZ
✅ 直接替換聯絡詢價
查看資料表 →ADF4112BRUZ
✅ 直接替換聯絡詢價
查看資料表 →ADF4153YRUZ-RL7
✅ 直接替換聯絡詢價
查看資料表 →ADF4154BRUZ
✅ 直接替換聯絡詢價
查看資料表 →ADF4111BRUZ-RL7 規格
| Device Type | Single, integer-N PLL frequency synthesizer |
| Maximum Frequency | 1.4 GHz |
| Manufacturer Family Frequency | 1.2 GHz |
| Channel Count | 1 |
| Architecture | Integer-N |
| Prescaler | Programmable dual-modulus prescaler |
| A Counter | 6-bit |
| B Counter | 13-bit |
| Reference Divider | Programmable |
| Phase Detector | Low-noise digital phase-frequency detector |
| Charge Pump | Precision charge pump |
| 輸出類型 | Clock |
| Input Logic Level | CMOS/TTL |
| 封裝 | 16-lead TSSOP, 0.173 in (4.40 mm) width |
| 安裝類型 | Surface mount |
| 工作溫度範圍 | -40 °C to +85 °C |
ADF4111BRUZ-RL7 16-lead tssop, 0.173 in (4.40 mm) width 腳位配置指南
ADF4111BRUZ-RL7(16-lead tssop, 0.173 in (4.40 mm) width 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: ADF4111BRUZ-RL7.
請參閱 資料表 以查看完整腳位配置。
典型應用
ADF4111BRUZ-RL7 適用於 6 應用s: Wireless Receiver Local Oscillator, Wireless Transmitter Up-Conversion, RF Down-Conversion Mixer, Instrumentation Signal Source, Test and Measurement Equipment, Industrial RF Control System.
Wireless Receiver Local Oscillator
The ADF4111BRUZ-RL7 fits a programmable wireless receiver local oscillator because its integer-N PLL architecture combines a programmable dual-modulus prescaler, 6-bit A counter, 13-bit B counter, and programmable reference divider. The Analog Devices family description identifies the ADF4110 series for up-conversion and down-conversion sections of wireless receivers. Place the charge pump and loop filter between the on-chip phase detector and the receiver VCO, then derive divider settings from the reference frequency and required RF channel. A compact layout, stable ground reference, and isolated reference routing are essential for predictable lock and low spurious content.
推薦
Wireless Transmitter Up-Conversion
ADF4111BRUZ-RL7 can generate the programmable local-oscillator signal required by a wireless transmitter up-conversion path. Its maximum frequency of 1.4 GHz provides headroom for RF channel plans, while the programmable prescaler and integer feedback counters permit the designer to select a divider relationship compatible with the reference source. The charge-pump output must drive a passive loop filter and the transmit VCO control input. Keep that feedback loop compact and decouple the synthesizer from the PA output and switching regulators so that power-supply noise does not degrade phase noise or reference spurs.
推薦
RF Down-Conversion Mixer
The ADF4111BRUZ-RL7 is appropriate for an RF down-conversion mixer that requires a programmable local oscillator. The phase-frequency detector compares the divided reference with the divided VCO feedback, while the precision charge pump drives an external loop filter to establish phase and frequency lock. Designers should calculate the prescaler and counter settings for the desired intermediate frequency and verify that the reference-divider plan supports the required channel spacing. Controlled-impedance RF routing, a continuous ground plane, and short charge-pump-to-filter connections help prevent the synthesizer from adding unwanted phase noise or instability.
推薦
Instrumentation Signal Source
ADF4111BRUZ-RL7 can serve as the frequency-control element in a programmable instrumentation signal source when the target output is produced by an external VCO. The integer-N counters and programmable reference divider allow the output frequency to be related systematically to a stable reference, making the architecture useful for controlled test tones and coherent measurement setups. The design must be evaluated for lock range and settling time using the actual VCO gain and reference frequency. Because the loop is external, component tolerance and parasitic capacitance in the charge-pump filter can affect repeatability and should be included in worst-case analysis.
推薦
Test and Measurement Equipment
The ADF4111BRUZ-RL7 is suitable for clock and signal-generation blocks inside test equipment when a stable reference and external VCO are available. Its phase-frequency detector, programmable counters, and charge-pump architecture provide the core elements of a closed-loop frequency synthesizer, while the 16-lead TSSOP package supports compact board layouts. For production test systems, verify lock behavior across temperature, supply tolerance, and the intended reference frequency range. Use a dedicated analog supply strategy and keep the reference and feedback traces away from digital clocks and relay or switch-node noise to preserve measurement accuracy.
推薦
Industrial RF Control System
ADF4111BRUZ-RL7 can support an industrial RF control system that synthesizes a deterministic carrier for sensing, communication, or process equipment. The device operates from a fixed reference and an external VCO, allowing its output frequency to be programmed through the prescaler and counter arrangement. Industrial implementations should include power-supply filtering, robust grounding, and a loop-filter design based on worst-case VCO gain rather than nominal conditions. The -40 °C to +85 °C operating range shown for the related package listing supports use across commercial and industrial temperature spans, subject to the complete electrical limits in the manufacturer data sheet.
推薦
推薦產品摘要
工程參考資料,適用於 ADF4111BRUZ-RL7 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | ADF4110BRU-REEL | ADF4113BRUZ | ADF4112BRUZ | ADF4153YRUZ-RL7 |
|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 16-TSSOP (0.173", 4.40mm Width) | 16-TSSOP (0.173", 4.40mm Width) | 16-TSSOP (0.173", 4.40mm Width) | 16-TSSOP (0.173", 4.40mm Width) | 16-TSSOP (0.173", 4.40mm Width) |
| Device Type | Single, integer-N PLL frequency synthesizer | Single integer-N PLL frequency synthesizer | Single PLL frequency synthesizer | Single PLL frequency synthesizer | PLL frequency synthesizer |
| Channel Count | 1 | 1 | 1 | 1 | 1 |
主要差異化特點
- Higher listed maximum operating frequency than the ADF4110 family option (對比ADF4110BRU-REEL)
- Direct match to the 1.4 GHz exact-orderable listing (對比ADF4113BRUZ)
- Integer-N counter architecture with explicit 6-bit A and 13-bit B counters (對比ADF4154BRUZ)
- Sixteen-lead TSSOP implementation with established exact MPN (對比ADF4153YRUZ-RL7)
設計說明
Do not treat the family relationship or matching TSSOP outline as proof of interchangeability. Verify the ADF4111 pin functions, prescaler range, A- and B-counter behavior, reference-divider settings, charge-pump polarity, current options, and register interface against the intended replacement. The ADF4113 and ADF415x candidates in particular must be checked for functional differences in frequency coverage and programmable behavior. Preserve the original reference and loop-filter design only after confirming that every divider setting produces a valid output frequency and that lock performance remains satisfactory.
Place the charge-pump output, loop-filter resistor, and filter capacitors close to the corresponding pins, and use a compact ground return beneath the filter network. The Analog Devices family data sheet identifies charge-pump output as pin 2 and discusses calculation of loop-filter component values. Minimize loop-filter trace length because parasitic resistance and capacitance alter damping, lock range, and reference-spur behavior. Keep the VCO control trace short as well, and avoid routing it beneath or immediately beside noisy switching supplies and RF power stages.
Use a continuous ground plane, local supply bypassing, and controlled-impedance routing for reference and RF feedback signals. Keep digital programming traces away from the sensitive charge-pump and reference paths to reduce crosstalk into the phase detector. If the VCO operates at a high frequency, use short return vias and avoid splits in the reference ground. PCB parasitics can materially change the designed loop response, so measure the assembled filter network and validate lock and phase noise across temperature and supply conditions before production.
Follow the manufacturer data sheet for the ADF4111 supply voltage, current, and decoupling requirements before assigning a supply rail. Provide local high-frequency bypass capacitance at the supply pins and keep switching-regulator routing away from the reference and charge-pump nodes. If multiple analog rails feed the VCO and PLL, use the enable or power-sequencing arrangement required by the complete RF design so that the reference and loop do not experience startup transients. Verify supply ripple and ground bounce at the PLL pins under maximum RF output activity.
合規資訊
The manufacturer product page identifies ADF4111 as a production device, but the cited results do not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.