ADF4360-4BCP - 1600 MHz Integer-N VCO | Analog Devices
MPN： ADF4360-4BCP ✓ 啟用中ADF4360-4BCP 概覽
An integer-N synthesizer and VCO is an integrated RF signal-source component. The frequency synthesizer derives a stable output from a reference oscillator, while the voltage-controlled oscillator provides the variable-frequency RF output. Together, these functions support closed-loop phase-locked-loop designs, RF signal generation, and frequency conversion within the RF and wireless power-management hierarchy.
The ADF4360-4BCP supports a 3.6 V power supply and 1.8 V-compatible logic. Its divide-by-2 operating option provides an RF output from 725 MHz to 875 MHz. Programmable output power lets system designers trade output level against downstream-component requirements, while digital lock detect supports reliable state monitoring in control software.
Operation is organized around the ADF4360-4 family architecture: an integrated VCO is coupled to an integer-N frequency synthesizer, and all on-chip registers are controlled through a 3-wire interface. This integration reduces the external component count compared with a discrete VCO and separate synthesizer implementation. A divider option extends the usable output range without requiring a second RF oscillator.
Typical applications include RF and microwave test equipment, wireless infrastructure, frequency-hopping communication systems, radar test equipment, and local-oscillator generation. The integrated frequency synthesizer and VCO are especially useful where a compact, programmable RF source is required and board area is more constrained than in a discrete implementation.
PCB implementation requires careful treatment of the exposed pad, supply connections, and high-frequency signal routing. Use the pin-description table and reference layout in the manufacturer datasheet when assigning tracks and thermal vias, and keep the RF output path controlled to minimize reflections and unintended coupling.
This page combines the manufacturer’s device description, package information, practical integration guidance, and a focused comparison with other ADF4360 family members. It highlights where the 1600 MHz-centered ADF4360-4BCP differs from related options and where an alternate family member may better match a specific frequency plan.
直接替換替代品，適用於 ADF4360-4BCP — 相同封裝，腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
ADF4360-0BCP
✅ 直接替換📋 參考替代品（不在目錄中）
ADF4360-1BCP
✅ 直接替換📋 參考替代品（不在目錄中）
ADF4360-3BCP
✅ 直接替換📋 參考替代品（不在目錄中）
ADF4360-2
✅ 直接替換📋 參考替代品（不在目錄中）
ADF4360-4BCP 規格（製造商公布）
| Device Type | Integer-N frequency synthesizer and voltage-controlled oscillator |
| Center Frequency | 1600 MHz |
| Divide-by-2 RF Output Range | 725 MHz to 875 MHz |
| Output Frequency Range | 65 MHz to 400 MHz |
| 供應電壓 | 3.6 V |
| Operating Supply Range | 3 V to 3.6 V |
| Logic Compatibility | 1.8 V-compatible logic |
| Maximum Listed Frequency | 1.75 GHz |
| Synthesizer Architecture | Integer-N |
| Control Interface | 3-wire serial interface |
| Output Power | Programmable |
| Lock Detection | Digital lock detect |
| Power-Down Modes | Hardware and software power-down |
| 封裝 | 24-lead WFQFN with exposed pad |
| 腳位數 | 24 pins |
| Terminal Count | 24 terminals |
| 安裝類型 | Surface mount |
ADF4360-4BCP 介面與連接器
ADF4360-4BCP 依製造商公布提供以下介面與連接器：功率輸入。擴充排針腳位、連接器腳位編號與電氣限制均定義於製造商文件中。
| 功率輸入 | 3.6 V |
請參閱 製造商文件 以取得完整的擴充排針腳位定義與連接器腳位編號。
功率與熱特性
| 功率輸入 | 3.6 V |
ADF4360-4BCP 由製造商公布的功率輸入與熱參數。
典型應用
ADF4360-4BCP 適用於 6 應用s: RF Signal Generators, Local Oscillator Generation, Wireless Communication Test, Radar Test Equipment, Frequency Hopping Systems, RF Frequency Conversion.
RF Signal Generators
The ADF4360-4BCP fits programmable RF signal-generator architectures because it integrates an integer-N synthesizer with a 1600 MHz VCO, reducing the number of separate frequency-generation blocks. Its 3-wire interface allows a controller to configure the frequency plan, while programmable output power and digital lock detect simplify source control. The divide-by-2 mode also provides a 725 MHz to 875 MHz RF output, creating an additional band for instrument or subsystem calibration. Evaluate the required output level, reference accuracy, and phase-noise target before setting the final test-equipment specifications.
推薦
Local Oscillator Generation
The ADF4360-4BCP can generate a tunable local-oscillator signal for receiver, transmitter, or conversion stages requiring an integrated source. Its 1600 MHz center frequency is intended for RF plans centered on the ADF4360-4 range, and the divide-by-2 output covers 725 MHz to 875 MHz. The 3 V to 3.6 V operating range and 1.8 V-compatible logic simplify integration with mixed-signal control electronics. RF layout must account for trace impedance, supply decoupling, reference jitter, and isolation from sensitive receiver chains.
推薦
Wireless Communication Test
A compact wireless communication test system can use the ADF4360-4BCP as a programmable RF excitation source for frequency and power sweeps. The integrated integer-N synthesizer supports repeatable digital frequency configuration, while digital lock detect gives the test controller a direct indication that the selected setup is valid. Its 725 MHz to 875 MHz divide-by-2 range is relevant to systems operating in that band. For production-grade accuracy, pair the source with a stable reference and calibrate output power and frequency across the intended operating range.
推薦
Radar Test Equipment
The ADF4360-4BCP is applicable to compact radar test fixtures that require an adjustable RF reference or local-oscillator signal. Its 1600 MHz-centered VCO option, programmable output level, and hardware and software power-down can support controlled bench or subsystem testing. The device’s integrated architecture minimizes board area compared with a discrete synthesizer and VCO, although the exposed-pad thermal path and RF output routing remain critical. Confirm tuning range, reference phase-noise contribution, and output isolation against the radar test plan.
推薦
Frequency Hopping Systems
Frequency-hopping communication equipment can use the ADF4360-4BCP to synthesize rapidly reconfigurable RF channels through its 3-wire control interface. A host controller can write the required integer-N settings, monitor digital lock detect, and use power-down controls between operating states. The 1600 MHz center-frequency option serves systems whose required channels fall within that range, while divide-by-2 operation covers 725 MHz to 875 MHz. Practical implementation requires deterministic register control, stable reference distribution, and careful RF routing to preserve channel accuracy.
推薦
RF Frequency Conversion
The ADF4360-4BCP can provide the programmable RF source used in conversion and heterodyne test arrangements. Its integrated VCO and integer-N architecture reduce the component count in compact frequency-conversion fixtures, and its 3-wire interface simplifies host control. The available 725 MHz to 875 MHz divide-by-2 output is useful when the conversion plan calls for that range. Designers should evaluate spur performance, reference phase noise, output-power stability, and unwanted coupling between the synthesized source and converter front end.
推薦
工程參考資料，適用於 ADF4360-4BCP — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | ADF4360-0BCP | ADF4360-1BCP | ADF4360-3BCP | ADF4360-2 |
|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 24-lead WFQFN with exposed pad | 24-lead WFQFN with exposed pad | 24-lead WFQFN with exposed pad | 24-lead WFQFN with exposed pad | 24-lead WFQFN with exposed pad |
| Device Architecture | Integer-N synthesizer and VCO | Integer-N synthesizer and VCO family member | Integer-N synthesizer and VCO family member | Integer-N synthesizer and VCO family member | Integer-N synthesizer and VCO |
主要差異化特點
- Direct 1600 MHz-centered VCO option (對比ADF4360-2)
- Additional divide-by-2 operating band (對比ADF4360-0BCP)
- 1600 MHz design alignment (對比ADF4360-1BCP)
設計說明
Follow the manufacturer’s exposed-pad land pattern and place multiple thermal vias within the pad area where the PCB process permits. The exposed pad is not an optional thermal accessory: it forms the principal heat-spreading path and may also be electrically connected according to the recommended layout. Keep high-current supply and ground paths short, place decoupling capacitors close to their associated pins, and avoid routing sensitive RF lines beneath the device or its switching return currents.
Treat the reference, control, and RF paths as three distinct layout domains. Route the 3-wire interface away from the RF output and VCO-sensitive traces, use a continuous ground reference, and apply impedance control to the RF output path. Keep the reference input short and decoupled, and verify that the final component placement supports the ground and exposed-pad arrangement shown in the manufacturer datasheet’s reference layout.
Do not choose an ADF4360 family alternative from the package suffix alone. The -4 option is centered at 1600 MHz, while related family options have different frequency ranges; the -2 option, for example, is described for 2000 MHz. Confirm VCO tuning coverage, prescaler settings, reference-input limits, output-power capability, and register compatibility before replacing the original part without layout changes.
合規資訊
The retrieved comparison excerpts identify RoHS and REACH as comparison attributes but do not provide the exact declarations for the ADF4360-4BCP orderable suffix. Obtain the current manufacturer or supplier compliance documentation before production release.
