ADF4360-5BCPRL7 - 1.3 GHz Integer-N VCO | Analog Devices
MPN: ADF4360-5BCPRL7 ✗ 停產ADF4360-5BCPRL7 概覽
An integer-N synthesizer is a phase-locked-loop-based frequency generator that combines an integrated voltage-controlled oscillator with a programmable frequency divider and phase detector. In the broader hierarchy, the ADF4360-5 belongs to clock and timing ICs, PLL synthesizers, RF signal generators, and integrated VCO products. Its integrated architecture reduces the number of discrete RF components required for local oscillator generation while retaining programmable frequency and phase control.
Key features include a 1300 MHz VCO center frequency, a divide-by-2 output range of 600 MHz to 700 MHz, and a 1400 MHz output specification. The 10 MHz to 250 MHz reference-input range supports common external reference arrangements. The three-wire register interface simplifies digital control, while the exposed thermal pad assists heat transfer from the RF synthesizer and its internal functional blocks.
The device uses an integer-N PLL architecture in which the synthesized output is related to the reference frequency by integer multiplication and division. This makes it useful when a stable, programmable RF output is required without the complexity of fractional-N calibration. The divide-by-2 path provides an additional output option when the required frequency falls within the stated 600 MHz to 700 MHz range. Register programming determines the frequency plan and operating mode through the manufacturer-defined serial interface.
Typical applications include local oscillator generation for RF transceivers, up/down-conversion chains, test-and-measurement instruments, wireless infrastructure, and communications equipment. It is particularly appropriate when the required output is close to the 1300 MHz VCO range and the system already includes a suitable reference clock and microcontroller or FPGA interface. The integrated VCO also simplifies RF board design compared with a discrete oscillator and separate PLL arrangement.
The principal design consideration is frequency-plan validation. The reference frequency, integer divider, output divider, RF output range, and required lock behavior must be checked together before committing to a PCB layout. Keep the serial interface traces short, provide clean reference-clock routing, decouple the supply pins according to the manufacturer datasheet, and provide adequate exposed-pad thermal relief beneath the 24-lead LFCSP.
This page combines the verified device characteristics with practical PLL design notes, application guidance, package details, and same-footprint family alternatives. It also identifies where application-specific frequency, phase-noise, temperature, compliance, and electrical data must be checked directly against the manufacturer datasheet before production release.
直接替換替代品,適用於 ADF4360-5BCPRL7 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: ADF4360-5BCPRL7 (相同外形與佔位) — 差異在於 Package, Product Type, Device Type, Divide-by-2 RF Output Range, Evaluation Board.
ADF4360-3BCPZRL
✅ 直接替換聯絡詢價
查看資料表 →ADF4360-4BCPZRL7
✅ 直接替換📋 參考替代品(不在目錄中)
ADF4360-7BCPZ
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →ADF4360-0BCPZRL
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →ADF4360-9BCPZ
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →ADF4360-5BCPRL7 規格
| Product Type | Integer-N synthesizer and voltage-controlled oscillator |
| VCO Center Frequency | 1300 MHz |
| Output Frequency | 1400 MHz |
| Divide-by-2 Output Range | 600 MHz to 700 MHz |
| Reference Input Frequency Range | 10 MHz to 250 MHz |
| PLL Architecture | Integer-N |
| Control Interface | 3-wire serial interface |
| Output Divider | Divide-by-2 option |
| Integrated VCO | Yes |
| 封裝 | 24-lead LFCSP with exposed pad |
| Package Code | CP |
| 腳位數 | 24 pins |
| 安裝類型 | Surface mount |
| Shipping Method | Tape and reel |
ADF4360-5BCPRL7 cp 腳位配置指南
ADF4360-5BCPRL7(cp 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: ADF4360-5BCPRL7.
請參閱 資料表 以查看完整腳位配置。
典型應用
ADF4360-5BCPRL7 適用於 6 應用s: RF Transceiver Local Oscillator, Communications RF Signal Source, Test and Measurement Instrument, Upconverter and Downconverter LO, Industrial RF Monitoring, Wireless Infrastructure RF Card.
RF Transceiver Local Oscillator
The ADF4360-5BCPRL7 fits RF transceiver designs requiring a programmable local oscillator around the 1300 MHz band. Its integrated integer-N synthesizer and VCO consolidate the oscillator, divider, and phase-locked loop into one 24-lead LFCSP, reducing board area and external RF-component count. The three-wire interface allows a transceiver control processor to configure the frequency registers directly. Before selection, confirm that the required mixer frequency, reference plan, lock time, and spur performance satisfy the receiver or transmitter specification.
推薦
Communications RF Signal Source
The ADF4360-5BCPRL7 can provide a programmable RF source for communications equipment operating within the 1300 MHz-centered band. Its integer-N architecture ties the output to the external reference through integer multiplication and division, supporting stable channel selection with a straightforward frequency plan. The 10 MHz to 250 MHz reference-input range supports multiple reference-clock architectures. System designers should evaluate phase noise and spurious-signal requirements against the complete transmitter chain rather than relying only on the nominal center frequency.
推薦
Test and Measurement Instrument
The ADF4360-5BCPRL7 is suitable for local-oscillator generation inside RF test and measurement equipment when the test channel falls within its frequency coverage. Integrating the VCO and integer-N PLL can reduce assembly complexity compared with a discrete oscillator and external synthesizer. The three-wire control interface supports automated frequency plans, instrument calibration, or sweep control through a controller. For laboratory-grade performance, validate phase noise, reference spurs, settling time, and output-power stability across the required temperature range.
推薦
Upconverter and Downconverter LO
In an upconverter or downconverter, the ADF4360-5BCPRL7 can generate the local-oscillator signal used to translate information between baseband and RF. Its integrated VCO is useful when the required oscillator output is close to 1300 MHz and board space is constrained. The divide-by-2 path provides an additional stated output range of 600 MHz to 700 MHz for suitable channel plans. Conversion gain, image rejection, and spurious performance must be evaluated with the complete RF layout because PCB routing and reference-clock quality can materially affect system results.
推薦
Industrial RF Monitoring
The ADF4360-5BCPRL7 can support programmable RF excitation or local-oscillator generation in industrial monitoring equipment. The integrated architecture is useful where an instrument must synthesize a repeatable carrier for sensor interrogation, communication, or measurement. A microcontroller or FPGA can control the three-wire interface and adjust channel-related divider settings. Industrial deployments should verify the operating-temperature limits, supply tolerances, reference stability, and regulatory output requirements before selecting this legacy catalog device for a new production platform.
推薦
Wireless Infrastructure RF Card
The ADF4360-5BCPRL7 can be evaluated for wireless-infrastructure RF cards requiring a local oscillator near the 1300 MHz band. Integrating the PLL and VCO reduces discrete component count and simplifies RF-card assembly, while the serial control interface permits coordinated channel and power sequencing. The final design must confirm reference-clock purity, output power, spur levels, lock behavior, and thermal performance in the complete card. Because the device is obsolete, long-term supply continuity and lifecycle risk also require separate approval.
推薦
推薦產品摘要
工程參考資料,適用於 ADF4360-5BCPRL7 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | ADF4360-3BCPZ | ADF4360-4BCPZRL7 | ADF4360-7BCPZ | ADF4360-0BCPZ |
|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 24-lead LFCSP with exposed pad (CP) | 24-lead LFCSP with exposed pad (CP) | 24-lead LFCSP with exposed pad (CP) | 24-lead LFCSP with exposed pad (CP) | 24-lead LFCSP with exposed pad (CP) |
| Product Architecture | Integer-N synthesizer and integrated VCO | Integer-N synthesizer and integrated VCO | Integer-N synthesizer and integrated VCO | Integer-N synthesizer and integrated VCO | Integer-N synthesizer and integrated VCO |
| Register Control Interface | 3-wire serial interface | 3-wire serial interface | 3-wire serial interface | 3-wire serial interface | 3-wire serial interface |
| VCO Configuration | Integrated VCO | Integrated VCO | Integrated VCO | Integrated VCO | Integrated VCO |
主要差異化特點
- Direct 1300 MHz VCO center-frequency option (對比ADF4360-0BCPZ)
- Integrated VCO with a defined divide-by-2 output path (對比ADF4360-9BCPZ)
- Same-brand 24-lead LFCSP family architecture (對比ADF4360-4BCPZRL7)
設計說明
Use the exact Analog Devices package drawing and land-pattern dimensions when assigning the 24-lead LFCSP. Preserve continuity and symmetry between the VCO, supply, decoupling, and ground connections. Connect the exposed pad to the recommended ground-plane construction rather than treating it as an optional thermal feature. Review RF output routing, reference-clock integrity, and exposed-pad thermal-via placement against the manufacturer layout guidance before fabrication.
Validate the complete frequency plan using the device reference-input range, PLL divider equations, VCO range, and divide-by-2 path. The reference frequency must provide the required channel spacing and phase-noise performance while remaining within the 10 MHz to 250 MHz input range. Incorrect divider or register assumptions can produce a frequency outside the intended VCO band even when the serial interface appears to operate correctly.
Keep the reference-clock path short and isolated from RF output and switching-node routing. Use a low-impedance ground return, place bypass capacitors close to the relevant supply pins, and avoid long stubs on the three-wire control interface. Reference-clock phase noise and unwanted coupling can appear directly as synthesis spurs, so include measurement of the complete PLL rather than evaluating only the VCO output in isolation.
合規資訊
No definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was identified for this exact orderable MPN. Confirm compliance with Analog Devices using the exact MPN and manufacturing lot requirements before environmental or automotive release.