ADS7809UB - 16-Bit 10us SAR ADC | Texas Instruments
MPN: ADS7809UB ✓ 啟用中ADS7809UB 概覽
An SAR ADC is a sampling analog-to-digital converter that compares the sampled input voltage with an internal DAC during a sequence of approximation steps. The ADS7809 uses this architecture to perform conversion in 10 µs. It can operate from its internal clock or synchronize conversion and data transfer to an external clock, allowing the converter to be coordinated with a digital system.
The primary features of the ADS7809 include 16-bit resolution, one analog input channel, a 10 µs conversion time, and a serial CMOS interface. Its sampling architecture acquires the input during the sampling phase before performing successive-approximation conversion. The internal reference, clock, and interface reduce the number of external supporting functions required in a typical measurement circuit.
Because the ADS7809 combines multiple converter functions in a single integrated circuit, it belongs to the broader ADC, data-converter IC, and signal-processing semiconductor hierarchy. The serial interface reduces the number of signal connections compared with a parallel converter, which can simplify PCB routing and integration with microcontrollers, DSPs, and embedded control systems. The architecture is particularly relevant when compactness, deterministic sampling, and serial data transfer are priorities.
Typical uses include industrial process monitoring, sensor signal acquisition, laboratory instrumentation, communications equipment, and embedded data-acquisition systems. The one-input configuration makes it appropriate for measuring one analog quantity at a time, while the internal clock provides a straightforward operating mode for standalone or processor-controlled acquisition.
Designers should follow the Texas Instruments ADS7809 datasheet for the complete pin description, recommended reference and bypass capacitors, acquisition timing, input-range configuration, and serial-interface sequencing. PCB signal-integrity practices are especially important when the source impedance is high or the ADC input is located far from the sensing element.
This product page combines the exact ordering information and architecture description with practical design guidance, application analysis, package details, and honest drop-in replacement assessment. It is intended to help engineers identify whether the ADS7809UB matches their accuracy, conversion-speed, interface, and PCB-layout requirements before requesting a quote.
直接替換替代品,適用於 ADS7809UB — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: ADS7809UB (相同外形與佔位) — 差異在於 Conversion Time, Package, Resolution, Converter Type, Output Interface.
ADS7809UB 最大額定值與電氣特性
| Converter Type | Successive Approximation Register (SAR) |
| 解析度 | 16 bit |
| Conversion Time | 10 µs |
| Analog Input Channels | 1 channel |
| Input Type | Single-ended analog input |
| Process Technology | CMOS |
| Data Interface | Serial CMOS interface |
| Clock Source | Internal or external clock |
| Internal Reference | Internal reference |
| Sample-and-Hold Circuit | Integrated sample-and-hold |
| 封裝 | 20-pin SOIC (DW) |
| 安裝類型 | Surface mount |
| RoHS Compliance | unknown |
| REACH Compliance | unknown |
| Automotive Qualification | not_applicable |
ADS7809UB 20-pin soic (dw) 腳位配置指南
ADS7809UB(20-pin soic (dw) 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: ADS7809UB.
請參閱 資料表 以查看完整腳位配置。
典型應用
ADS7809UB 適用於 6 應用s: Industrial Process Monitoring, Precision Sensor Signal Acquisition, Laboratory Instrumentation, Communications Equipment, Embedded Data-Acquisition Systems, Power and Rail Monitoring.
Industrial Process Monitoring
The ADS7809UB is suitable for acquiring a single process variable such as pressure, temperature, or level when the controller needs 16-bit conversion resolution and a serial interface. Its 10 µs conversion time supports rapid sequential updates, while the integrated sample-and-hold circuit, reference, and clock reduce the number of separate analog functions required on the board. The device can also synchronize to an external data clock, allowing the acquisition cycle to be coordinated with a PLC or embedded controller. For long sensor wiring, place a low-noise buffer close to the ADC input and follow the source-impedance and decoupling guidance in the Texas Instruments ADS7809 datasheet.
Precision Sensor Signal Acquisition
ADS7809UB fits single-sensor front ends requiring more conversion detail than an 8-bit or 12-bit ADC without the wiring burden of a parallel interface. The 16-bit SAR converter samples the analog input and completes conversion in 10 µs, while the serial CMOS interface limits the number of data lines connected to a microcontroller or DSP. This arrangement is useful for pressure bridges, resistive sensors, potentiometers, and conditioned analog outputs. The converter's integrated sample-and-hold circuit must be allowed to acquire correctly before conversion, so source impedance, acquisition timing, and input filtering should be reviewed together rather than treated as independent analog and digital design tasks.
Laboratory Instrumentation
The ADS7809UB can serve as the measurement converter in laboratory equipment that digitizes one analog input at a relatively high nominal resolution. Its 16-bit format supports precise recording and control calculations, and the 10 µs conversion time permits repeated updates without using a bulky parallel bus. Internal-clock operation simplifies standalone instrument control, while external-clock synchronization gives a test set or embedded processor deterministic control over the measurement sequence. Because input-referred error, noise, reference quality, and settling behavior determine real-world accuracy, instrument designers should preserve the recommended reference network and route the analog input away from digital switching nodes.
Communications Equipment
ADS7809UB is applicable in communications equipment that monitors one analog control, supply, or feedback channel and exchanges measurement data over a compact serial link. The one-input 16-bit architecture can provide detailed system telemetry without the pin count associated with a parallel converter, while the 10 µs conversion rate is suitable for monitoring rather than continuous waveform capture. In a mixed-signal communication board, keep the ADC input path and reference return away from high-current switching paths and use the internal or external clock mode that best matches the host controller. Serial framing, chip-select behavior, and data timing should be implemented exactly as described in the manufacturer interface diagrams.
Embedded Data-Acquisition Systems
The ADS7809UB suits embedded acquisition systems where a microcontroller reads a precise analog measurement through a serial interface. Its integrated reference, clock, sample-and-hold circuit, and SAR converter reduce external analog overhead, while 16-bit resolution provides useful measurement detail for control and logging. The 10 µs conversion time allows the host to complete a conversion in less than many conventional control-loop intervals. Choose internal-clock operation for autonomous timing or external-clock operation when the controller must schedule acquisition precisely. Firmware must still handle conversion status, data framing, and any required calibration before converting the raw code into an engineering unit.
Power and Rail Monitoring
ADS7809UB can be used to digitize a monitored voltage or a scaled sensor output in power-control and diagnostic systems. The 16-bit converter resolution is useful when the design needs more precision than a coarse supervisory ADC, while the 10 µs conversion time supports frequent updates of a control or protection loop. The single-channel architecture is appropriate when one critical node must be measured locally and reported through a serial bus. Input scaling must keep the signal within the converter's permitted range, and the reference and supply pins should be decoupled according to the manufacturer layout guidance to prevent board-level supply noise from obscuring the measured result.
工程參考資料,適用於 ADS7809UB — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 |
|---|---|
| Resolution | 16 bit |
| Conversion Time | 10 µs |
| Input Channels | 1 channel |
| Converter Architecture | Successive Approximation Register (SAR) |
| Data Interface | Serial CMOS |
| Clock Source | Internal or external clock |
| Package | 20-pin SOIC (DW) |
| Brand | Texas Instruments |
| Reference | Internal reference |
| Sample-and-Hold Circuit | Integrated |
設計說明
Route the analog input as a short, quiet trace directly from the source to the converter's analog input pin. Keep the trace away from clock, serial-data, relay-coil, and high-current switching paths. Use a ground-plane return for the reference and bypass-capacitor connections rather than routing return current through the analog trace. The Texas Instruments ADS7809 datasheet layout and typical application diagrams should guide the final placement of the reference and bypass network.
Verify acquisition behavior with the actual signal-source impedance. A high source impedance can require additional acquisition time for the internal sample-and-hold capacitor to settle to the required accuracy. If the sensor is remote or connected through a long cable, place suitable protection and buffering close to the ADC. Review the input-capacitance and source-impedance guidance in the manufacturer datasheet before adding large filter capacitors that may slow settling.
Place the recommended supply and reference bypass capacitors close to their associated pins, with short ground paths and the correct polarity. Decoupling helps isolate the converter from supply disturbances, but capacitor values and placement should follow the manufacturer recommendations rather than generic bulk values. Check the schematic and layout examples in the Texas Instruments ADS7809 datasheet for the minimum supported network and exposed-pad connection.
Do not treat the ADS7809 as a simultaneous-sampling or waveform-capture converter. It has one input, so multiple analog channels require external multiplexing, and its 10 µs conversion interval must be included in the acquisition schedule. Also distinguish ADS7809UB from related ADS7809 ordering codes with different package options. Confirm the 20-pin SOIC DW package and complete pin description before releasing a PCB footprint or substitution.
合規資訊
The manufacturer product and ordering information does not explicitly state the requested compliance statuses for ADS7809UB. Obtain current material-declaration documentation for the exact ordering code before making a compliance claim.