ADV7390BCBZ-A-RL - 10-Bit 3-DAC Video Encoder | Analog Devices
MPN: ADV7390BCBZ-A-RL ✓ 啟用中ADV7390BCBZ-A-RL 概覽
A video encoder is a semiconductor that translates digital image data into standards-compatible analog signals suitable for composite or S-Video connections. Within the signal-chain hierarchy, the ADV7390 is an interface IC and video-conversion device. Its DAC-based architecture provides three independently controllable analog outputs, while cable detection, DAC power-down, sleep mode, and content-dependent low-power operation help reduce consumption when video output is unused.
The encoder supports 8-bit, 10-bit, and 16-bit high-definition input interfaces at clock rates up to 74.25 MHz. According to the manufacturer datasheet, the device supports SMPTE 274M for 1080i, SMPTE 296M for 720p, and SMPTE 240M for 1035i, together with EIA/CEA-861B compliance support. Individual DAC enable controls and automatic cable detection support system-level power management.
Its monolithic implementation integrates three 10-bit DACs with digital video-processing logic, minimizing external components and board area. The ADV7390 family supports composite CVBS and Y-C S-Video outputs, while its patented content-dependent low-power DAC behavior reduces activity when the source picture does not require full output drive. The 30-ball WLCSP uses a compact 0.5 mm ball pitch, making careful PCB layout and assembly control important in portable and space-constrained equipment.
Typical applications include legacy game-console video outputs, DVD player analog interfaces, portable media-player TV-out functions, set-top and media-player equipment, and industrial control panels requiring composite video. The low-power architecture is particularly useful where the encoder must remain available while the system frequently changes between active video and standby states.
Designers should preserve the datasheet-recommended input, output, and reference circuitry, route sensitive analog signals away from digital switching paths, and verify thermal performance across the full operating-temperature range. The small WLCSP footprint reduces board area but requires careful ball placement, solder mask design, and assembly-process control.
This page consolidates the device architecture, verified electrical characteristics, package details, application guidance, and drop-in replacement analysis into an engineering-focused reference for evaluating the ADV7390BCBZ-A-RL in compact analog-video systems.
直接替換替代品,適用於 ADV7390BCBZ-A-RL — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: ADV7390BCBZ-A-RL (相同外形與佔位) — 差異在於 Analog Supply Voltage, Device Type, Package, Power Management.
ADV7391BCBZ-A-RL
✅ 直接替換聯絡詢價
查看資料表 →ADV7390BCBZ-A-RL 最大額定值與電氣特性
| Device Type | High-speed digital-to-analog video encoder |
| Number of DACs | 3 DACs |
| DAC Resolution | 10 bit |
| Digital Input Resolution | 8 bit, 10 bit, or 16 bit |
| Maximum Input Clock Frequency | 74.25 MHz |
| Analog Supply Voltage | 2.7 V or 3.3 V |
| Supported Video Outputs | Composite CVBS and S-Video Y-C |
| Supported High-Definition Standards | SMPTE 274M, SMPTE 296M, and SMPTE 240M |
| Consumer Interface Compliance | EIA/CEA-861B compliance support |
| 封裝 | 30-ball WLCSP, 2.53 mm x 3 mm |
| Ball Pitch | 0.5 mm |
| 安裝類型 | Surface mount |
| Temperature Grade | Industrial |
| Power Management | Content-dependent low-power DAC operation |
| Output Control | Individual DAC on/off control |
| Cable Management | Automatic cable detection and DAC power-down |
| Low-Power Mode | Sleep mode with minimal power consumption |
| RoHS 狀態 | RoHS |
| Packaging | Tape and reel |
ADV7390BCBZ-A-RL 30-ball wlcsp, 2.53 mm x 3 mm 腳位配置指南
ADV7390BCBZ-A-RL(30-ball wlcsp, 2.53 mm x 3 mm 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: ADV7390BCBZ-A-RL.
請參閱 資料表 以查看完整腳位配置。
典型應用
ADV7390BCBZ-A-RL 適用於 6 應用s: Game Console Composite Video Output, DVD Player Analog Video Interface, Portable Media Player TV-Out, Set-Top Box Composite Interface, Industrial Video Test Equipment, Digital Video Presentation System.
Game Console Composite Video Output
The ADV7390BCBZ-A-RL fits game consoles that must generate analog composite or S-Video from a digital graphics engine. Its three 10-bit DACs provide separate output resources, while the 74.25 MHz maximum input clock supports high-definition timing modes that include 1080i and 720p. The 30-ball WLCSP occupies only 2.53 mm by 3 mm, helping preserve board area in compact consoles. Individual DAC shutdown, cable detection, and content-dependent low-power operation are useful when only one or two video outputs are connected.
推薦
DVD Player Analog Video Interface
The ADV7390BCBZ-A-RL is suitable for DVD players and legacy media devices that require composite CVBS or Y-C output alongside digital video processing. Three 10-bit DACs allow multiple analog outputs without requiring separate converter packages, while support for 8-bit, 10-bit, and 16-bit digital input accommodates different source interfaces. Automatic cable detection and DAC power-down help reduce unnecessary activity when a cable is absent, and sleep mode supports low-power standby operation.
推薦
Portable Media Player TV-Out
The ADV7390BCBZ-A-RL suits portable media players that need TV-out capability in a restricted board area. Its compact 30-ball WLCSP package measures 2.53 mm by 3 mm, while the 0.5 mm ball pitch requires fine-pitch assembly and careful PCB design. Patented content-dependent low-power DAC operation, sleep mode, and automatic DAC shutdown are particularly valuable when video generation is enabled intermittently. The three 10-bit DAC channels also allow composite and S-Video outputs to coexist when required.
推薦
Set-Top Box Composite Interface
The ADV7390BCBZ-A-RL can provide legacy composite and S-Video outputs in a set-top box whose primary display path is digital. The encoder accepts 8-bit, 10-bit, or 16-bit high-definition input at rates up to 74.25 MHz and supports timing associated with 1080i, 720p, and 1035i. Individual DAC control allows unused outputs to remain off, while cable detection can support automatic interface management. The small package reduces routing congestion around high-speed digital video circuitry.
推薦
Industrial Video Test Equipment
The ADV7390BCBZ-A-RL is applicable to compact test and measurement products that need to generate standard-definition analog video from digital test patterns. Its three 10-bit DACs provide repeatable analog outputs for composite or S-Video measurement, and the documented input rates cover several high-definition timing standards. Sleep mode and content-dependent DAC power reduction can lower energy use between test sequences. Compact instrumentation designs benefit from the 2.53 mm by 3 mm WLCSP footprint.
推薦
Digital Video Presentation System
The ADV7390BCBZ-A-RL can supply analog display compatibility in a digital presentation system where legacy composite or S-Video equipment remains connected. The three independently controllable 10-bit DACs support multiple output arrangements, while cable detection and DAC power-down help manage unused interfaces. Support for 16-bit input preserves a direct digital data path when the source provides it, and the small chip-scale package supports dense control and processing boards without requiring a separate multi-DAC converter.
推薦
推薦產品摘要
工程參考資料,適用於 ADV7390BCBZ-A-RL — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | ADV7391BCBZ-A-RL |
|---|---|---|
| Package | 30-ball WLCSP, 2.53 mm x 3 mm | 30-ball WLCSP, 2.53 mm x 3 mm |
| Brand | Analog Devices | Analog Devices |
| Device Type | High-speed digital-to-analog video encoder | Video encoder |
| DAC Resolution | 10 bit | 10 bit |
| Maximum Input Clock | 74.25 MHz | 74.25 MHz |
| Digital Input Width | 8 bit, 10 bit, or 16 bit | 8 bit, 10 bit, or 16 bit |
| Analog Supply Voltage | 2.7 V or 3.3 V | 2.7 V or 3.3 V |
| Ball Pitch | 0.5 mm | 0.5 mm |
主要差異化特點
- Three integrated 10-bit DAC outputs (對比ADV7391BCBZ-A-RL)
- Compact 30-ball chip-scale implementation (對比ADV7391BCBZ-A-RL)
- Documented multi-standard video support (對比ADV7391BCBZ-A-RL)
設計說明
Treat the 0.5 mm-pitch WLCSP as a fine-pitch assembly and routing constraint. Follow the Analog Devices package drawing for land pattern, solder-mask opening, and exposed-pad or thermal-via requirements. Place decoupling capacitors close to their associated supply balls, minimize loop area, and confirm the PCB fabricator’s capabilities for 0.5 mm ball-pitch assembly before committing the layout.
Separate the composite and S-Video analog outputs from high-speed digital clocks and switching-regulator nodes. Use short, impedance-controlled digital routes to the encoder input while keeping analog output paths away from sources of switching noise. Route ground returns continuously and use the manufacturer’s reference layout to preserve the intended relationship between the DAC outputs, supply network, and bypass components.
Use individual DAC shutdown, cable detection, and sleep-mode controls deliberately instead of leaving unused analog outputs active. Before power sequencing is finalized, verify that disabling a DAC does not change the behavior of an attached cable, downstream receiver, or system bias network. Confirm capacitor tolerances and the selected low-power mode against the video timing and startup requirements in the manufacturer datasheet.
Do not assume that every member of the ADV7390/ADV7391/ADV7392/ADV7393 family is interchangeable despite related ordering codes. Compare the complete WLCSP ball list, number and function of DAC outputs, supported operating modes, and required external circuitry. Also verify that the selected package is the 30-ball 2.53 mm by 3 mm WLCSP rather than a 32-lead LFCSP family variant.
合規資訊
RoHS is identified for the ADV7390BCBZ-A-RL. Automotive qualification, REACH status, lead-free classification, halogen-free status, and conflict-minerals reporting are not established for this ordering option.