ADV7401BSTZ-110 10-Bit Video Decoder | Analog Devices
MPN: ADV7401BSTZ-110 ✓ 啟用中ADV7401BSTZ-110 概覽
A video decoder is an interface IC that converts analog video into a digital pixel stream that can be processed, stored, or transmitted by digital electronics. Within the broader semiconductor hierarchy, the ADV7401 belongs to the video-processing IC family, connects to the interface-IC category, and ultimately supports the wider digital-video ecosystem. Its standardized BT.656 output simplifies connection to frame buffers, video processors, capture controllers, and display or broadcast equipment.
The principal characteristics include 10-bit video digitization, four ADC channels, multiformat analog-video decoding, and digital ITU-R BT.656 output. According to the Analog Devices product page, the decoder supports PAL, NTSC, and SECAM inputs supplied through composite or S-video interfaces. The -110 ordering suffix identifies the specific 110 MHz-capable device variant, while the BSTZ package designation corresponds to the 100-lead LQFP configuration.
Technically, the ADV7401 combines analog-to-digital conversion with decoding and graphics digitization in one package. Its four ADC channels allow multiple analog-video sources to be captured under appropriate input configurations. The resulting 10-bit pixel data is delivered digitally, avoiding repeated conversion between analog video and digital processing domains. This integration can reduce board area and simplify synchronization when the decoder is placed ahead of an FPGA, ASIC, DSP, or dedicated video processor.
Typical uses include SDTV and HDTV decoding inside professional monitors, broadcast test equipment, video walls, surveillance recorders, industrial inspection systems, and legacy multimedia appliances. PAL, NTSC, and SECAM support makes it especially relevant to globally deployed equipment that must accept several regional television formats. The digital output can also feed later-stage color processing, scaling, enhancement, encoding, or frame capture.
Designers should use the manufacturer datasheet pin-description table when assigning PCB tracks and should treat the analog input network, synchronization signals, digital output timing, supply rails, and exposed thermal considerations as an integrated signal-integrity problem. Component values, supported synchronization modes, electrical limits, and initialization requirements should be taken directly from the manufacturer documentation for the exact ADV7401BSTZ-110 ordering code.
This page combines the manufacturer product description, distributor package identification, application guidance, and engineering-focused design considerations for engineers evaluating the ADV7401BSTZ-110. It also distinguishes the decoder from related Analog Devices video-conversion families and explains when a same-footprint replacement is appropriate without treating functionally similar devices as automatic substitutes.
直接替換替代品,適用於 ADV7401BSTZ-110 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: ADV7401BSTZ-110 (相同外形與佔位) — 差異在於 ADC Resolution, Package, Digital Output Format, RoHS Status.
ADV7401BSTZ-80
✅ 直接替換📋 參考替代品(不在目錄中)
ADV7403BSTZ-110
✅ 直接替換聯絡詢價
查看資料表 →ADV7403KSTZ-140
✅ 直接替換聯絡詢價
查看資料表 →ADV7400AKSTZ-110
✅ 直接替換聯絡詢價
查看資料表 →ADV7402KST-110
✅ 直接替換📋 參考替代品(不在目錄中)
ADV7401BSTZ-110 規格
| Product Type | Video decoder and RGB graphics digitizer |
| ADC Resolution | 10 bit |
| ADC Channel Count | 4 channels |
| Supported Analog Formats | PAL, NTSC, and SECAM |
| Supported Analog Inputs | Composite and S-video |
| Digital Output Format | ITU-R BT.656 |
| Device Architecture | Single-chip multiformat decoder and digitizer |
| Video Class | SDTV and HDTV |
| 封裝 | 100-lead LQFP, 14 mm x 14 mm |
| Lead Count | 100 leads |
| 安裝類型 | Surface mount |
| Device Variant | ADV7401BSTZ-110 |
ADV7401BSTZ-110 100-lead lqfp, 14 mm x 14 mm 腳位配置指南
ADV7401BSTZ-110(100-lead lqfp, 14 mm x 14 mm 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: ADV7401BSTZ-110.
請參閱 資料表 以查看完整腳位配置。
典型應用
ADV7401BSTZ-110 適用於 6 應用s: Broadcast Video Monitoring, Professional Video Test Equipment, Security Video Recorders, Industrial Inspection Systems, Video Wall and Digital Signage, Legacy AV Retrofit Equipment.
Broadcast Video Monitoring
The ADV7401BSTZ-110 fits multiformat broadcast monitoring because it decodes PAL, NTSC, and SECAM composite or S-video sources and converts them into ITU-R BT.656 digital data. Its 10-bit digitization and four ADC channels provide a compact front end for a professional monitor, waveform display, or analysis instrument. The downstream processor can handle pixel formatting, measurement, recording, or display without requiring a separate general-purpose analog video decoder. Because deployment regions may use different television standards, regional format support is more valuable than a decoder restricted to one composite video system.
推薦
Professional Video Test Equipment
The ADV7401BSTZ-110 is suitable for portable and rack-mounted video test equipment that must inspect legacy PAL, NTSC, and SECAM sources. Its integrated four-ADC, 10-bit decoding path supports conversion of composite or S-video into a standard BT.656 stream for analysis, scope display, frame capture, or automated test. The single-chip approach reduces the number of discrete conversion stages in an instrument while retaining multiformat coverage. System timing, synchronization, calibration, and signal-conditioning requirements should be implemented according to the manufacturer reference information.
推薦
Security Video Recorders
The ADV7401BSTZ-110 can serve as the analog-video ingestion stage in a security recorder or camera interface. PAL and NTSC decoding covers common legacy camera installations, while SECAM support assists systems deployed in regions using that standard. The four available ADC channels and 10-bit digitizer can feed an embedded processor or FPGA through ITU-R BT.656 for compression, recording, motion detection, or network transmission. Designers should verify chroma format, sync behavior, input levels, and any required filtering against the exact manufacturer documentation.
推薦
Industrial Inspection Systems
The ADV7401BSTZ-110 can digitize PAL, NTSC, or SECAM composite and S-video camera output in industrial inspection and machine-vision systems. The 10-bit ITU-R BT.656 result can be routed to an FPGA, image processor, or embedded control system for defect analysis, alignment, or production logging. Four ADC channels provide flexibility for multi-camera or multi-source arrangements when the electrical design supports the required source switching. Signal integrity and synchronization are especially important in factory environments, so use controlled grounding, filtering, and routing based on the application circuit.
推薦
Video Wall and Digital Signage
The ADV7401BSTZ-110 is useful in video-wall controllers and digital-signage players that still accept legacy composite or S-video sources. It converts PAL, NTSC, or SECAM into BT.656 pixel data for scaling, compositing, color adjustment, and display output. Four ADC channels can support several source paths in a controlled architecture, while the single-chip decoder reduces analog conversion complexity. In installations with long external cables, input protection, filtering, ground management, and isolation must be designed carefully so that the decoder receives clean, correctly synchronized composite video.
推薦
Legacy AV Retrofit Equipment
The ADV7401BSTZ-110 supports legacy AV retrofit projects where an installed camera, VCR, or broadcast source still produces PAL, NTSC, or SECAM composite or S-video. Placing the decoder ahead of a modern processor preserves the original source while producing a digital BT.656 stream for recording, transmission, or display. The 10-bit digitization and four-ADC arrangement provide useful design flexibility, but existing installations vary in signal amplitude, polarity, and synchronization. Confirm those parameters and preserve adequate headroom to avoid clipping or unstable synchronization.
推薦
推薦產品摘要
工程參考資料,適用於 ADV7401BSTZ-110 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | ADV7401BSTZ-80 | ADV7403BSTZ-110 | ADV7403KSTZ-140 | ADV7400AKSTZ-110 | ADV7402KST-110 |
|---|---|---|---|---|---|---|
| Package | 100-LQFP (14x14 mm) | 100-LQFP (14x14 mm) | 100-LQFP (14x14 mm) | 100-LQFP (14x14 mm) | 100-LQFP (14x14 mm) | 100-LQFP (14x14 mm) |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Timing Designation | 110 | 80 | 110 | 140 | 110 | 110 |
| Lead Count | 100 leads | 100 leads | 100 leads | 100 leads | 100 leads | 100 leads |
主要差異化特點
- Direct 110-class ordering option with four integrated ADC channels (對比ADV7402KST-110)
- Higher timing designation than the ADV7401BSTZ-80 option (對比ADV7401BSTZ-80)
- Established multiformat PAL, NTSC, and SECAM decoding (對比ADV7403BSTZ-110)
- Same 100-LQFP outline as higher-speed ADV7403 option (對比ADV7403KSTZ-140)
設計說明
Use the manufacturer pin-description table and application circuit when laying out the ADV7401BSTZ-110. Place the analog input components and digital interface devices according to the documented signal paths, and provide continuous return paths beneath digital clock and data routes. The 100-LQFP footprint requires deliberate escape routing between the closely spaced leads; do not substitute a generic 100-pin symbol because a matching lead count does not guarantee correct pin functions.
Treat composite or S-video input routing as an analog and synchronization problem. Use the recommended input network, keep sensitive nodes compact, maintain a stable ground reference, and isolate the analog paths from BT.656 outputs and switching supplies. Check synchronization and video amplitude with a representative source because format compatibility alone does not guarantee correct lock, chroma interpretation, or acceptable signal levels.
Do not select ADV7401BSTZ-110 solely by comparing the package pin count with another decoder. Verify pin names, power requirements, digital output behavior, supported synchronization modes, register configuration, initialization sequence, and timing margins. This is particularly important for the ADV7401BSTZ-80, ADV7403, ADV7400, and ADV7402 alternatives, whose suffix and family differences can affect system behavior even when the LQFP outline is the same.
Decouple each supply connection using the manufacturer-specified capacitance and placement. Keep the regulator or supply source away from sensitive analog input nodes, and route power and ground connections to avoid sharing narrow paths with high-current digital return currents. Validate the assembled board for startup sequencing, supply ripple, and video synchronization because poor power distribution can imitate decoder or analog-source failures.
合規資訊
The manufacturer product description and distributor package listings do not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status for the exact ordering code. AEC-Q100 qualification is not indicated.