ATSAM4S4BA-MU - 120MHz Cortex-M4 256KB MCU | Microchip
MPN： ATSAM4S4BA-MU ✓ 啟用中ATSAM4S4BA-MU 概覽
A microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile program memory, working memory, and peripherals on one package. The ATSAM4S4BA-MU belongs to the SAM4S family, which sits within the hierarchy of embedded microcontroller, RISC processor, and semiconductor product categories. Its integrated Flash retains firmware without a separate memory chip, while its SRAM supports stack operations, data buffers, and real-time application state.
The device's 120 MHz Cortex-M4 core provides the primary headline performance figure, while its 256 KB embedded Flash stores firmware and the 64 KB SRAM provides volatile working memory. Its 1.2 V and 3.3 V operating references match the Microchip family documentation, and the 64-QFN package supports compact surface-mount construction. The integrated MPU and DSP instructions are useful for controlled memory access and digital signal-processing tasks.
The SAM4S architecture supports both control-oriented and connected embedded designs. According to the family datasheet, the portfolio includes USB device connectivity and broad peripheral integration, while the verified product listing describes the ATSAM4S4BA-MU specifically as a SAM4S Cortex-M4 device. Firmware should remain within the available memory limits and use the documented peripheral and interrupt architecture rather than assuming that all family variants expose identical resources.
Typical uses include industrial control modules, connected embedded products, human-interface equipment, and compact USB-enabled controllers. The processor speed and DSP instruction support suit responsive control loops, protocol handling, and digital filtering, while the integrated Flash simplifies firmware deployment. Board-level USB implementations require careful routing and the associated connector, protection, and signal-integrity design.
The primary design consideration is package and memory planning. Designers should use the manufacturer's 64-QFN land pattern, expose-pad requirements, and recommended decoupling rather than relying on a generic QFN footprint. Firmware must also be checked against the exact ATSAM4S4BA-MU peripheral configuration, clock setup, memory map, and operating limits in the manufacturer datasheet.
This page combines verified distributor specifications, current purchasing information, migration-aware drop-in candidates, comparison parameters, and practical design guidance. It distinguishes confirmed data from fields that require review against the full Microchip datasheet, helping engineers evaluate this MCU without treating same-family naming as proof of automatic software compatibility.
直接替換替代品，適用於 ATSAM4S4BA-MU — 相同封裝，腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號： ATSAM4S4BA-MU （相同外形與佔位） — 差異在於 Package, SRAM, Instruction Set, RoHS Status, Operating Temperature.
ATSAM4S4BA-UUR
✅ 直接替換聯絡詢價
查看資料表 →ATSAM4SA16BA-MU
✅ 直接替換📋 參考替代品（不在目錄中）
ATSAM4S4AA-MU
✅ 直接替換聯絡詢價
查看資料表 →ATSAM4S2BA-MU
✅ 直接替換聯絡詢價
查看資料表 →ATSAM3N1AA-MU
✅ 直接替換聯絡詢價
查看資料表 →ATSAM4S8BA-MU
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →ATSAM4S4BA-MU 最大額定值與電氣特性
| Product Type | 32-bit ARM Cortex-M4 RISC microcontroller |
| Maximum CPU Frequency | 120 MHz |
| Embedded Flash Memory | 256 KB |
| Flash Organization | 256K x 8 bits |
| SRAM | 64 KB |
| Processor Core | Arm Cortex-M4 |
| Instruction Set | Thumb-2 with DSP instructions |
| Memory Protection Unit | Integrated |
| Operating Voltage References | 1.2 V and 3.3 V |
| 封裝 | 64-QFN, 9 x 9 mm |
| Package Type | VQFN with exposed pad |
| 安裝類型 | Surface mount |
| Embedded Flash Feature | ECC, security bit, and lock bits |
| USB Connectivity | Full-speed USB device port supported by the SAM4S family |
ATSAM4S4BA-MU vqfn with exposed pad 腳位配置指南
ATSAM4S4BA-MU（vqfn with exposed pad 封裝）的腳位配置。 此數位 IC 包含 GPIO、通訊介面（UART、SPI、I2C）與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料： ATSAM4S4BA-MU.
請參閱 資料表 以查看完整腳位配置。
典型應用
ATSAM4S4BA-MU 適用於 6 應用s: Industrial Control Module, USB-Enabled Embedded Product, Digital Signal Conditioning, Human Interface and Panel Controller, Networked Communication Gateway, Data Acquisition Controller.
Industrial Control Module
The ATSAM4S4BA-MU fits compact industrial control modules that require deterministic real-time processing, local program storage, and moderate working memory. Its 120 MHz Arm Cortex-M4 core supports responsive control tasks, while the DSP instruction set can accelerate selected digital operations without adding a separate processor. The confirmed 256 KB embedded Flash and 64 KB SRAM provide room for firmware, state machines, buffers, and communication stacks. The 64-QFN 9 x 9 mm package also preserves board area in tightly integrated equipment. Designers should verify the exact peripheral map, operating-temperature grade, and exposed-pad layout before release, particularly when the control module operates near power converters or high-current motors.
推薦
USB-Enabled Embedded Product
ATSAM4S4BA-MU is suitable for a USB-enabled embedded product that combines device connectivity with local firmware and real-time control. The Microchip SAM4S family documentation identifies a full-speed USB device port, and the target MCU provides a 120 MHz Cortex-M4 core with 256 KB of embedded Flash. That combination can support configuration transfer, data exchange, firmware update, and control functions within one package. The USB interface does not remove the need for careful board design: route differential pairs according to the manufacturer guidance, provide the required passive network, and maintain suitable grounding. Firmware should use the exact ATSAM4S4BA-MU USB instance and clock configuration documented by Microchip rather than inheriting assumptions from another SAM4S code base.
推薦
Digital Signal Conditioning
The ATSAM4S4BA-MU can serve in digital signal-conditioning or measurement-control equipment where a control loop and digital filtering share one microcontroller. Its Cortex-M4 core operates up to 120 MHz and includes DSP instructions, providing a practical basis for filter, mixing, waveform, and fixed-point processing tasks. The 256 KB embedded Flash can retain the control application, and 64 KB of SRAM can support sample buffers and intermediate results. Actual signal-chain performance depends on the selected ADC, DAC, external signal conditioning, and sampling architecture, none of which are quantified in the supplied data. Engineers should benchmark the intended algorithm, budget memory dynamically, and use the documented exception and peripheral behavior before committing the design to production.
推薦
Human Interface and Panel Controller
ATSAM4S4BA-MU is well matched to human-interface controllers that coordinate buttons, displays, indicators, and communications in a compact embedded appliance. The 120 MHz processor provides responsive event handling and peripheral scheduling, while 256 KB of embedded Flash and 64 KB of SRAM support interface state, graphics buffers, and protocol code. Its 64-QFN 9 x 9 mm package helps limit footprint in space-constrained panels. Engineering review should include debounce and ESD strategies for external controls, logic-level compatibility for display interfaces, and power sequencing for shared buses. Because the verified data does not enumerate all GPIO, touch, or display peripherals for this exact ordering code, the pin mapping and peripheral availability must be confirmed in the manufacturer datasheet before schematic release.
推薦
Networked Communication Gateway
ATSAM4S4BA-MU can support a small communication gateway that coordinates serial protocols, local control, and configuration storage. Its 120 MHz Cortex-M4 core can manage multiple interrupt-driven protocol tasks, and the SAM4S family is documented to provide broad peripheral integration for connectivity-oriented embedded systems. The 256 KB embedded Flash accommodates firmware and protocol code, while 64 KB of SRAM is suitable for packet buffers and state. This arrangement can reduce the component count compared with separate processors and memory, but only if the selected part includes every required UART, SPI, USB, or other interface. Layout should separate sensitive communications from switching nodes, and software should include watchdog, timeout, and recovery mechanisms for unattended equipment.
推薦
Data Acquisition Controller
ATSAM4S4BA-MU can act as the central controller in a compact data-acquisition system when samples must be conditioned digitally, timestamped, buffered, and transferred. The 120 MHz Cortex-M4 core and DSP instructions support real-time filtering and fixed-point operations, while 64 KB of SRAM can hold short acquisition windows. The 256 KB embedded Flash stores configuration, calibration data, and application firmware. For analog measurement systems, the MCU still requires an external or integrated ADC with suitable resolution, input bandwidth, and reference accuracy; those specifications are not included in the verified ATSAM4S4BA-MU listing. Designers should calculate worst-case buffer occupancy, keep signal paths away from digital switching edges, and verify acquisition timing with the complete peripheral configuration.
推薦
推薦產品摘要
工程參考資料，適用於 ATSAM4S4BA-MU — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | ATSAM4S4BA-UU | ATSAM4SA16BA-MU | ATSAM4S4AA-MU | ATSAM4S2BA-MU | ATSAM3N1AA-MU |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-QFN (9x9) | 64-QFN (9x9), to be confirmed from ordering table | 64-QFN (9x9), to be confirmed from ordering table | 64-QFN (9x9), to be confirmed from ordering table | 64-QFN (9x9), to be confirmed from ordering table | 64-QFN (9x9), to be confirmed from ordering table |
| Architecture | ARM 32-bit RISC with Thumb-2 and DSP instructions | SAM4S family | SAM4 family | SAM4S family | SAM4S family | SAM3N family |
| Drop-In Proximity | Reference device | 70% | 90% | 80% | 70% | 70% |
主要差異化特點
- Confirmed high-frequency Cortex-M4 performance (對比ATSAM4S4AA-MU)
- Directly identified 64-QFN package size (對比ATSAM4SA16BA-MU)
- Documented family-level migration path (對比ATSAM3N1AA-MU)
- Verified purchasing availability (對比ATSAM4S2BA-MU)
設計說明
Use the exact Microchip 64-QFN 9 x 9 mm land pattern and exposed-pad recommendation rather than a generic QFN footprint. The verified listing identifies an exposed pad, so the thermal and electrical design must account for its connection, solderability, and copper-coupling requirements. Place input and bulk decoupling capacitors close to the supply pins, provide a short return path for every high-current connection, and check the manufacturer stencil and assembly guidance before releasing the PCB.
Plan the supply rails around the confirmed 1.2 V and 3.3 V operating references. Confirm which rails must remain present in every operating mode, the allowed sequencing, and the maximum ramp rate in the full datasheet. Avoid adding filtering that prevents the regulator from charging internal supply nodes, and use the recommended startup capacitors and clock configuration. Brownout behavior, watchdog settings, and controlled shutdown should be validated in the final power-failure test matrix.
Keep the Cortex-M4 support network, crystal or clock source, reset circuitry, and decoupling away from noisy switching nodes. If the design uses USB, route the differential pair as a controlled impedance path with a continuous reference plane and minimize vias and stubs. The verified data does not enumerate all peripheral pins, so do not finalize signal assignments or isolation clearances until they have been cross-checked against the exact package drawing and pin table.
Do not assume that every similarly named SAM4S or SAM3N device is automatically software- and footprint-compatible. The family datasheet documents pin-to-pin compatibility across selected families, but device-specific Flash, SRAM, peripheral, clock, package, and ordering differences can still affect a migration. Before replacing ATSAM4S4BA-MU, compare the ordering-information table, package drawing, pin names, peripheral matrix, memory map, and startup code, then perform board-level regression testing.
合規資訊
The supplied verified results confirm manufacturer, device architecture, memory, package, and ordering information but do not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.