ATTINY12L-4PU - 8-Bit 4MHz AVR Microcontroller | Microchip
MPN: ATTINY12L-4PU ✓ 啟用中ATTINY12L-4PU 概覽
An 8-bit microcontroller is a programmable integrated circuit that executes a compact instruction set while reading instructions and data from nonvolatile memory. The ATTINY12L belongs to the AVR family, whose architecture uses 8 general-purpose working registers and 90 instructions. Within the product hierarchy, it sits between simple logic controllers and larger microcontrollers with considerably more RAM, Flash, timers, and communication peripherals.
Important device characteristics include 1 KB of Flash organized as 512 words by 16 bits, 64 bytes of EEPROM, six I/O pins, and operation from 2.7 V to 5.5 V. The device is fully static, allowing processing to stop when the clock is stopped. Its reduced-pin architecture is useful when a design needs basic control functions, indicator outputs, key scanning, or a small autonomous sequencer rather than a high-bandwidth communications controller.
The ATTINY12L-4PU uses an advanced RISC-style AVR core with most instructions completing in a single clock cycle. Program storage remains nonvolatile, while the small EEPROM area supports parameters, calibration values, counters, and configuration data that must survive a power interruption. Because the device has limited memory, firmware structure, lookup tables, and buffer sizing require deliberate attention.
Typical applications include simple timers, relay-control modules, LED status indicators, battery-operated instruments, fan controllers, and compact sensing interfaces. It is also appropriate for teaching and prototyping environments where an 8-pin controller, 4 MHz operation, and a simple development toolchain simplify initial hardware bring-up.
PCB layout should keep the supply and ground connections short and provide adequate bypass capacitance near the device. Because the ATTINY12L-4PU is a PDIP-8 part, consider mechanical availability, assembler compatibility, and the lead-spacing requirements of the target PCB before placing the component in a new high-volume design.
This page combines the device specifications, package information, sourcing guidance, verified drop-in alternatives, and practical design considerations needed to evaluate the ATTINY12L-4PU for compact embedded-control projects.
直接替換替代品,適用於 ATTINY12L-4PU — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: ATTINY12L-4PU (相同外形與佔位) — 差異在於 Architecture, Package Type.
ATTINY12-8PU
✅ 直接替換聯絡詢價
查看資料表 →ATTINY12L-4PU 最大額定值與電氣特性
| Microcontroller Type | 8-bit AVR RISC microcontroller |
| 最大時脈頻率 | 4 MHz |
| Flash Program Memory | 1 KB (512 x 16 bits) |
| EEPROM Data Memory | 64 bytes |
| 工作電源電壓 | 2.7 V to 5.5 V |
| General-Purpose I/O Pins | 6 pins |
| General-Purpose Working Registers | 8 registers |
| Instruction Set Size | 90 instructions |
| Instruction Execution | Most instructions execute in one clock cycle |
| Operating Mode | Fully static |
| Program Memory Type | Nonvolatile Flash |
| 封裝 | 8-pin PDIP |
| Package Type | Through-hole PDIP |
| Temperature Grade | Industrial temperature grade |
| Package Designation | Green PDIP (P) |
| Architecture | AVR enhanced RISC architecture |
| Core Architecture | 8-bit |
| RoHS 狀態 | Compliant |
ATTINY12L-4PU green pdip (p) 腳位配置指南
ATTINY12L-4PU(green pdip (p) 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: ATTINY12L-4PU.
請參閱 資料表 以查看完整腳位配置。
典型應用
ATTINY12L-4PU 適用於 6 應用s: Compact LED Sequencer and Indicator Controller, Small Relay and Actuator Control Module, Battery-Operated Sensing Interface, Simple Counter and Event Logger, Low-Power Timer and Delay Controller, Embedded Education and Rapid Prototyping.
Compact LED Sequencer and Indicator Controller
The ATTINY12L-4PU suits compact LED sequencing because its six I/O pins can drive indicator states while the 4 MHz AVR core executes simple timing routines. The 1 KB of nonvolatile Flash is sufficient for a short state table, and 64 bytes of EEPROM can retain brightness settings, step counts, or a programmed operating mode. Keep the firmware modular because the memory budget is small, and use the six available I/O pins without assuming dedicated PWM resources.
推薦
Small Relay and Actuator Control Module
The ATTINY12L-4PU can implement a basic relay or actuator controller with state-machine logic, timing, and fault monitoring. Its six I/O pins provide enough parallel control for a modest number of outputs when the drive transistors and flyback protection are handled externally. The 2.7 V to 5.5 V operating range permits direct compatibility with common 3.3 V and 5 V control rails, while the fully static architecture supports clock-stopped low-power states.
推薦
Battery-Operated Sensing Interface
For a battery-operated sensing interface, the ATTINY12L-4PU can digitize a simple switch or resistive sensor, apply threshold logic, and record a counter in its 64-byte EEPROM. Operation across 2.7 V to 5.5 V supports both low-energy 3 V systems and conventional 5 V supplies. The device's small memory footprint also restricts the amount of local buffering, so samples requiring history or complex filtering should be handled by a larger controller.
推薦
Simple Counter and Event Logger
The ATTINY12L-4PU fits a compact counter or event logger when only a small number of events must be retained. Six I/O inputs can monitor switches, contactors, or pulse sources, while the EEPROM stores a persistent event count between power cycles. The 1 KB Flash limit favors a short interrupt-driven state machine rather than large buffering, and the 4 MHz clock provides ample timing margin for basic debouncing and pulse counting.
推薦
Low-Power Timer and Delay Controller
The ATTINY12L-4PU works well in a low-power timer where the clock can be stopped between events. Its fully static operation allows the core to remain idle without losing program data, and the 90-instruction AVR architecture supports compact countdown and scheduling routines. Firmware should use the controller's timer resources only if the exact peripheral functions listed in the manufacturer datasheet meet the design requirements; otherwise, a software timer can be used within the 4 MHz clock budget.
推薦
Embedded Education and Rapid Prototyping
The ATTINY12L-4PU is useful in electronics education because its 8-pin PDIP package is easy to insert into a breadboard and its 1 KB of Flash is large enough for small introductory programs. Students can demonstrate GPIO control, debouncing, counters, EEPROM retention, and basic AVR programming in one compact device. The limited memory and peripheral set make it less appropriate for advanced networking, but that constraint also keeps laboratory exercises focused and understandable.
推薦
推薦產品摘要
工程參考資料,適用於 ATTINY12L-4PU — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | ATTINY12-8PU |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Package | 8-PDIP | 8-PDIP |
| Clock Speed Grade | 4 MHz | 8 MHz speed designation |
| Flash Program Memory | 1 KB (512 x 16 bits) | 1 KB |
| EEPROM Data Memory | 64 bytes | 64 bytes |
| Operating Supply Voltage | 2.7 V to 5.5 V | 2.7 V to 5.5 V |
| General-Purpose I/O Pins | 6 pins | 6 pins |
| CPU Architecture | 8-bit AVR RISC | 8-bit AVR RISC |
| Program Memory Type | Nonvolatile Flash | Nonvolatile Flash |
| Temperature Grade | Industrial | Industrial |
主要差異化特點
- Matches the specified 4 MHz speed grade (對比ATTINY12-8PU)
- Combines Flash, EEPROM, and six I/O pins in an 8-pin package (對比ATTINY12-8PU)
- Supports both 3.3 V and 5 V system rails (對比ATTINY12-8PU)
設計說明
Use the manufacturer's pin-description table in the ATTINY12L datasheet to assign PCB nets, then place the supply bypass capacitor directly across the controller's supply and ground pins. Keep these traces short and avoid routing high-current loads through the same paths used by sensitive inputs. Because the ATTINY12L-4PU is a through-hole PDIP-8 device, verify the PCB hole pattern, pin-1 orientation, and assembly clearance before layout release.
Design the power rail for the full 2.7 V to 5.5 V operating range, including startup, switching transients, and the voltage drop caused by peripheral current. The device can operate from a 3.3 V battery, but battery life depends on the selected external components and firmware duty cycle rather than the controller alone. Use the fully static operating characteristic to justify clock-stopped periods, and verify that every connected peripheral remains safe while the core is idle.
The most common design mistake is assuming that a related ATTINY part is automatically interchangeable. The ATTINY12L-4PU is an 8-pin PDIP device with a 4 MHz speed designation; the ATTINY12L-4SU uses a different package, and the ATTINY12-8PU uses a different speed designation. Before substituting any part, compare the pinout, clock assumptions, supply limits, interrupt behavior, memory organization, and package dimensions against the manufacturer documentation.
合規資訊
The LCSC product listing identifies the exact ATTINY12L-4PU as RoHS compliant. No separate REACH, halogen-free, conflict-minerals, or automotive-qualification declaration is stated for this exact ordering code.