Microchip Technology

ATTINY13-20SU - 8-Bit 20MHz AVR MCU | Microchip Technology

MPN: ATTINY13-20SU ✓ 啟用中
2.7 V to 5.5 V Vdss 8-pin SOIC Package 20 MHz Speed 1 KB in-system programmable Flash Memory
MOQ: 1 |

ATTINY13-20SU 概覽

The Microchip Technology ATTINY13-20SU is an 8-bit AVR RISC microcontroller with a maximum clock frequency of 20 MHz, 1 KB of in-system programmable Flash memory, and an 8-pin SOIC package. It also includes 64 bytes of SRAM, 64 bytes of EEPROM, a 32-byte register file, six I/O pins, and a four-channel 10-bit analog-to-digital converter.

An 8-bit AVR microcontroller is a compact embedded-control device that executes instructions from programmable Flash through an AVR reduced-instruction-set computer core. The ATTINY13 belongs to the ATtiny family within the broader hierarchy of microcontrollers, embedded processors, and semiconductors. Its combination of limited memory, mixed-signal peripherals, and a small package makes it suitable for compact controls, sensor interfaces, and simple timing systems.

Core features include 20 MHz operation, 1 KB ISP Flash, 64-byte SRAM, 64-byte EEPROM, a four-channel 10-bit ADC, and six I/O pins. The internal EEPROM supports persistent configuration or calibration data, while in-system programming allows firmware to be loaded without removing the device. The ADC can monitor up to four analog channels, enabling compact products that need more than simple digital switching.

The AVR architecture provides an 8-bit instruction set with separate program and data-memory spaces. At 20 MHz, the manufacturer describes throughput as 20 MIPS. The small 1 KB Flash capacity sharply limits code size, so peripheral initialization, application logic, and delay routines must be sized carefully. The 64-byte SRAM should be treated as a tight working-memory budget for applications with buffering or interrupt-heavy routines.

Typical uses include low-cost sensor nodes, simple motor and relay controllers, compact LED indicators, battery-operated instruments, and educational AVR projects. The ADC makes the device useful for potentiometers, light sensors, thermistors, and other analog inputs. Its small footprint also suits hobbyist boards and custom compact modules where a larger microcontroller would add unnecessary cost and board area.

When designing around the ATTINY13-20SU, prioritize code and SRAM budgeting, use ISP programming correctly, and follow the manufacturer's pin-description table when assigning PCB tracks. Confirm ADC reference and input limits against the operating voltage. Because the MCU has only six I/O pins, choose peripheral multiplexing carefully and provide the decoupling and programming interface recommended in the manufacturer documentation.

This page combines the exact core specifications, verified same-package replacement candidates, pin and package guidance, application-focused design notes, and a parameter comparison intended to accelerate engineering selection without repeating the complete manufacturer datasheet.

直接替換替代品,適用於 ATTINY13-20SU — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: ATTINY13-20SU (相同外形與佔位) — 差異在於 Package, Register File, SRAM, ADC Resolution, Core Architecture.

Microchip Technology
Package: 8-SOIC
Core Architecture: AVR 8-bit RISC
比較對象 ATTINY13-20SU →
Microchip Technology
Package: 8-pin SOIC (SO-8, 150 mil)
Register File: 32 x 8-bit
SRAM: 64 bytes
比較對象 ATTINY13-20SU →
Microchip Technology
Register File: 32 bytes
SRAM: 64 bytes
ADC Resolution: 10 bits
比較對象 ATTINY13-20SU →

ATTINY13A-SSU

✅ 直接替換
Microchip Technology
📦 8-pin SOIC
AVR enhanced RISC 8-bit · 1 KB (512 x 16) · 64 bytes · 64 bytes · 32 x 8-bit · 20 MHz · Up to 20 MIPS (1 MIPS/MHz) · 1.8 V to 5.5 V

聯絡詢價

查看資料表 →

ATTINY13-20SSQ

✅ 直接替換
📦 8-pin SOIC
20 MHz and 1 KB Flash match; suffix-specific qualification or temperature-grade differences require review

📋 參考替代品(不在目錄中)

ATTINY13-20SJ

✅ 直接替換
📦 8-pin SOIC
20 MHz and 1 KB Flash match; suffix-specific temperature or qualification differences require review

📋 參考替代品(不在目錄中)

ATTINY13-20SSU

✅ 直接替換
📦 8-pin SOIC
20 MHz and 1 KB Flash match; suffix-specific ordering code or qualification differences require review

📋 參考替代品(不在目錄中)

ATTINY15L-1SI

✅ 直接替換
📦 8-pin SOIC
1 KB Flash and 8-pin SOIC format match; peripheral mix and clock details differ, so firmware and pin-function review is required

📋 參考替代品(不在目錄中)

ATTINY13-20SU 最大額定值與電氣特性

Device Type 8-bit AVR RISC microcontroller
最大時脈頻率 20 MHz
Throughput 20 MIPS at 20 MHz
Flash Memory 1 KB in-system programmable Flash
SRAM 64 byte
EEPROM 64 byte
Register File 32 byte
ADC Resolution 10 bit
ADC Channels 4 channels
I/O Pins 6 pins
供應電壓 2.7 V to 5.5 V
封裝 8-pin SOIC
安裝類型 Surface mount
Programming Method In-system programming

ATTINY13-20SU 8-pin soic 腳位配置指南

ATTINY13-20SU(8-pin soic 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。

ATTINY13-20SU 的 8-pin soic 封裝腳位圖

無詳細腳位定義資料: ATTINY13-20SU.

請參閱 資料表 以查看完整腳位配置。

典型應用

ATTINY13-20SU 適用於 6 應用s: Compact Sensor Node, Simple Motor Controller, LED Status Indicator, Battery-Powered Instrument, Educational AVR Platform, Small Appliance Interface.

🧩

Compact Sensor Node

The ATTINY13-20SU fits compact sensor nodes because its four-channel 10-bit ADC can digitize several analog inputs while the six I/O pins support the sensor interface and control signals. At up to 20 MHz, the AVR core can sample and filter data quickly enough for slow industrial, environmental, or wearable measurements. Its 64-byte EEPROM can retain calibration constants, while the 1 KB Flash budget requires concise acquisition and filtering routines. Designers should keep sampling schedules and data handling simple to avoid exhausting SRAM or program memory.

🏭

Simple Motor Controller

The ATTINY13-20SU can control small motors, solenoids, or relays where a full-featured MCU would be unnecessary. Six I/O pins leave enough flexibility for control outputs, a limit input, and status indication, and the 20 MHz clock supports responsive edge detection and timing. Its limitations are important: only 1 KB of Flash and 64 bytes of SRAM are available, so complex motion algorithms should be avoided. Use suitable driver transistors, flyback protection, and separate logic rails where necessary.

💡

LED Status Indicator

A compact LED indicator is a natural use for the ATTINY13-20SU because six I/O pins can drive multiple LEDs through current-limiting resistors or a driver. The 20 MHz AVR core can implement timers, button debouncing, and status sequences without an external clock component, while the small 8-pin SOIC package supports dense control boards. Keep animation tables small because Flash is limited to 1 KB and SRAM to 64 bytes. For low-duty-cycle operation, a sleep-oriented design can further reduce energy use in battery installations.

🔋

Battery-Powered Instrument

The ATTINY13-20SU works in battery-powered instruments where low cost, low power, and mixed-signal capability matter more than memory capacity. Its 2.7 V to 5.5 V operating range accommodates common regulated battery rails, and the ADC can monitor supply, temperature, or a resistive sensor. The 64-byte EEPROM is useful for saving a small number of calibration or configuration values. Power consumption depends on the active mode, ADC activity, and sleep configuration, so the final duty cycle should be evaluated against the manufacturer's electrical characteristics.

🔧

Educational AVR Platform

The ATTINY13-20SU is well suited to introductory AVR projects because it combines a familiar RISC architecture, in-system programming, 20 MHz operation, and a four-channel 10-bit ADC in only eight pins. Students can learn GPIO control, timers, ADC conversion, EEPROM retention, and serial debugging on a compact board. Its restricted 1 KB Flash and 64-byte SRAM also provide useful lessons in memory budgeting. A standard AVR programming interface and ISP programming method make it practical for education and prototype development.

🏠

Small Appliance Interface

The ATTINY13-20SU can act as a secondary controller in a small appliance where buttons, LEDs, a timer, and one analog sensor must be coordinated. Six I/O pins and the four-channel ADC provide adequate control for a deliberately simple product, and in-system programming supports production firmware updates. Product designers should partition functions carefully because interrupt service routines and temporary variables compete for only 64 bytes of SRAM. Use the device only where its 1 KB Flash limit and six available I/O pins align with the appliance's fixed feature set.

推薦產品摘要

ATTINY13A-SSU Microchip Technology 用於: Compact Sensor Node, Simple Motor Controller, Battery-Powered Instrument, Educational AVR Platform ATTINY13-20SSU same-series sensor-controller candidate 用於: Compact Sensor Node, Battery-Powered Instrument ATTINY15L-1SI 8-pin ATtiny control candidate 用於: Simple Motor Controller, Educational AVR Platform ATTINY13-20SJ same-series control candidate 用於: LED Status Indicator, Small Appliance Interface ATTINY13-20SSQ same-series control candidate 用於: LED Status Indicator, Small Appliance Interface
What is the ATTINY13-20SU?
The ATTINY13-20SU is an 8-bit AVR RISC microcontroller from Microchip Technology designed for compact embedded-control applications. According to the manufacturer's ATtiny13 product information, it combines 1 KB of in-system programmable Flash, 64 bytes of SRAM, 64 bytes of EEPROM, a 32-byte register file, six I/O pins, and a four-channel 10-bit ADC in an 8-pin SOIC package.
What is the operating voltage of ATTINY13-20SU?
The ATTINY13-20SU operates from 2.7 V to 5.5 V according to the manufacturer datasheet. This voltage range supports both 3.3 V and 5 V systems, while the selected operating voltage must remain compatible with the ADC reference, input limits, I/O levels, and external circuitry. The manufacturer product information identifies the device as a 3.3 V and 5 V AVR MCU.
What is the maximum clock frequency of ATTINY13-20SU?
The ATTINY13-20SU supports a maximum clock frequency of 20 MHz. According to the manufacturer ATtiny13 product page, this corresponds to 20 MIPS throughput. The high clock rate enables relatively quick peripheral operations, but the 1 KB Flash and 64-byte SRAM remain the more important constraints when sizing firmware and runtime data.
Where can I download the ATTINY13-20SU datasheet PDF?
The ATTINY13-20SU datasheet and supporting technical documents are available from the official Microchip Technology ATtiny13 product page at https://www.microchip.com/en-us/product/ATtiny13. Open the product documentation section for the PDF and revision applicable to the device. Use the pin-description table, electrical characteristics, and package drawing for PCB implementation.
Where can I find the ATTINY13-20SU pinout?
The ATTINY13-20SU pinout is documented in the pin-configuration section of the Microchip Technology ATtiny13 datasheet and its 8-pin SOIC package drawing. The device exposes six general-purpose I/O pins, power pins, ground, reset, and the programming interface. Use the numbered package drawing rather than relying on a generic SOIC-8 outline.
What are the key specifications of ATTINY13-20SU that engineers should know?
The ATTINY13-20SU is a 20 MHz, 8-bit AVR MCU with 1 KB ISP Flash, 64 bytes of SRAM, 64 bytes of EEPROM, six I/O pins, and a four-channel 10-bit ADC. The manufacturer identifies 20 MIPS throughput at 20 MHz and an 8-pin SOIC package. These specifications define it as a compact mixed-signal controller with very limited code and data-memory capacity.
Is ATTINY13-20SU suitable for battery-powered projects?
The ATTINY13-20SU can suit battery-powered projects because its ATtiny13 architecture supports low-power operation and its 2.7 V to 5.5 V supply range covers common battery-derived rails. Actual battery life depends on the selected operating mode, clock arrangement, ADC use, and sleep implementation. Consult the manufacturer power-consumption and clock-control guidance for application-specific estimates.
How do I program an ATTINY13-20SU?
The ATTINY13-20SU is programmed through its in-system programming interface, allowing firmware to be written while the device remains mounted on the target PCB. The procedure and required ISP clock settings are defined in the Microchip ATtiny13 programming documentation. Ensure that reset, supply, ground, and programming signals are routed so the programmer can reach every assembled board.
Can ATTINY13-20SU read analog sensors?
Yes, the ATTINY13-20SU includes a four-channel 10-bit ADC. According to the manufacturer product information, this allows the MCU to measure analog inputs from devices such as potentiometers, thermistors, and light sensors. The ADC reference, input range, sample time, and pin multiplexing must be configured within the limits stated in the datasheet.
ATTINY13-20SU vs ATTINY13A-SSU: which is better for a new design?
ATTINY13A-SSU is the newer-generation option to evaluate for a new design, while ATTINY13-20SU remains appropriate when an established 20 MHz design is being maintained. The manufacturer naming indicates a family generation change, so firmware, timing, and peripheral revisions must be checked before interchange. Both appear in 8-pin SOIC options, but the datasheet revision is required for final qualification.
When should I choose ATTINY13-20SU instead of ATTINY13A-SSU?
Choose ATTINY13-20SU when maintaining an existing 20 MHz ATtiny13 design, reusing qualified firmware, or matching an established supply and timing configuration. Choose ATTINY13A-SSU for a new design when its current family documentation, availability, and device revisions better match the project. Because code size and timing behavior can affect firmware compatibility, perform a complete migration review.
What is the best drop-in replacement for ATTINY13-20SU?
ATTINY13A-SSU is the closest same-manufacturer 8-pin SOIC candidate to evaluate for a drop-in replacement. The ATTINY13-20SSQ, ATTINY13-20SJ, ATTINY13-20SSU, and ATTINY15L-1SI are additional candidates found in cross-reference records, but each must be checked for temperature grade, peripheral differences, clock behavior, and programmer compatibility. Do not substitute solely from package shape.
What can replace ATTINY13-20SU?
Several Microchip Technology ATtiny-family candidates can replace ATTINY13-20SU after engineering review. ATTINY13A-SSU is the strongest family-generation candidate, while ATTINY13-20SSQ, ATTINY13-20SJ, and ATTINY13-20SSU provide same-series options. Because all use limited resources and share an 8-pin format, verify pin functions, electrical limits, ADC behavior, and existing firmware before replacement.
Is ATTINY13-20SU the same as ATTINY102-MFR?
No, the ATTINY13-20SU and ATTINY102-MFR are not direct drop-in equivalents. The ATTINY13-20SU is an 8-pin SOIC device with 1 KB Flash, 64-byte SRAM, and a four-channel 10-bit ADC, whereas the ATTINY102 family is a different AVR device with substantially different memory and peripheral resources. A board change and complete firmware review would be required.
Where can I buy ATTINY13-20SU and what is the lead time?
Use the Request a Quote form on this page to request current ATTINY13-20SU availability, commercial terms, and lead time. The manufacturer product page identifies the ATtiny13 family and provides technical documentation, while current channel status can change independently of the device specifications. Provide the required quantity, target date, and packaging preference when requesting the quotation.
Is ATTINY13-20SU in stock and what does it cost?
Current ATTINY13-20SU stock and commercial pricing should be requested through the Request a Quote form on this page. The manufacturer product page confirms the technical family, but it does not establish a universal live inventory count or a fixed transaction price. Include quantity, reel or tube preference, and required delivery date to obtain an actionable quotation.

工程參考資料,適用於 ATTINY13-20SU — 比較、設計指引及合規資訊。

選型指南

Choose the ATTINY13-20SU for compact embedded controls that need an 8-bit AVR core, up to 20 MHz operation, four 10-bit ADC channels, six I/O pins, and a small 8-pin SOIC footprint. It is particularly suitable for simple sensing, LED indication, appliance interfaces, and educational projects where the 1 KB Flash and 64-byte SRAM limits are understood before development. Select ATTINY13A-SSU for a new design when the newer ATtiny13 generation provides preferred device status or revised documentation, but complete firmware and timing validation. Consider ATTINY13-20SSQ, ATTINY13-20SJ, or ATTINY13-20SSU when their specific suffix characteristics match the required qualification and ordering conditions. Evaluate ATTINY15L-1SI only after confirming its pin functions, peripheral set, clock arrangement, and firmware compatibility. No verified cross-brand drop-in replacement was identified.

與替代品比較

參數 本產品 ATTINY13A-SSU ATTINY13-20SSQ ATTINY13-20SJ ATTINY13-20SSU ATTINY15L-1SI
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Architecture 8-bit AVR RISC 8-bit AVR RISC 8-bit AVR RISC 8-bit AVR RISC 8-bit AVR RISC 8-bit AVR RISC
Flash Memory 1 KB ISP Flash 1 KB 1 KB 1 KB 1 KB 1 KB
EEPROM 64 byte 64 byte 64 byte 64 byte 64 byte 64 byte
Programming Method In-system programming In-system programming In-system programming In-system programming In-system programming In-system programming

主要差異化特點

  • Four-channel analog conversion in an eight-pin MCU (對比ATTINY15L-1SI)
  • Direct continuity with the original ATtiny13 design (對比ATTINY13A-SSU)
  • 20 MHz execution within a very small memory footprint (對比ATTINY102-MFR)

設計說明

Route the ISP signals, reset circuit, supply, and ground so an external programmer can operate without removing the microcontroller. Keep the ISP interface accessible or provide test pads, and follow the manufacturer reference schematic for signal conditioning. With only six I/O pins, assign multiplexed functions before laying out the PCB because changing pin allocation later can require a board respin.

Place the supply bypass capacitor close to the power and ground pins and keep the return path short. If analog measurements are important, account for supply noise, ADC reference stability, and source impedance at the selected 10-bit resolution. The operating range is 2.7 V to 5.5 V, but external sensors and interface logic must use compatible logic levels.

The 1 KB Flash and 64-byte SRAM impose strict code and data budgets. Avoid large libraries, deep call chains, buffered logging, and interrupt routines that create excessive temporary variables. Measure the compiled program size and worst-case stack usage before production, and use EEPROM writes only for values that genuinely require nonvolatile storage because each write consumes limited endurance.

Use the manufacturer's 8-pin SOIC land pattern and pin numbering without inferring pin functions from another ATtiny device. Keep sensitive analog traces away from switching nodes and programming signals. If the ADC is used, provide a defined reference source and consider local filtering where source impedance could prevent the converter from settling within the acquisition time.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

Compliance declarations require confirmation from the applicable manufacturer declaration or product documentation.

相關搜尋

attiny13 pinout attiny13 datasheet attiny13 vs attiny85 attiny13 price attiny13 projects attiny13 arduino attiny13 smd attiny13 programming attiny13 programmer ATTINY13-20SU datasheet ATTINY13-20SU pinout ATTINY13-20SU replacement ATTINY13-20SU equivalent ATTINY13-20SU vs ATTINY13A-SSU Microchip Technology ATTINY13-20SU

相關元件與詞彙

Microchip Technology ATTINY13-20SU ATTINY13A-SSU ATTINY13-20SSQ ATTINY13-20SJ ATTINY13-20SSU ATTINY15L-1SI ATtiny13 AVR 8-bit microcontroller RISC architecture embedded microcontroller semiconductor in-system programming 1 KB Flash memory 64-byte SRAM 64-byte EEPROM 10-bit ADC four-channel ADC six I/O pins 20 MHz clock 8-pin SOIC SOIC family surface-mount package sensor interface
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情