Broadcom

BCM58101B0KFBG - Broadcom Lynx Networking System-on-Chip

MPN: BCM58101B0KFBG ✓ 啟用中
Balance Vdss KFBG Package
MOQ: 1 |

BCM58101B0KFBG 概覽

The Broadcom BCM58101B0KFBG is a LYNX networking system-on-chip (SoC) supplied in a bulk package for embedded networking applications. The device is identified as BCM58101 series silicon, with the B0 ordering designation and KFBG package suffix defining the exact catalog configuration. Broadcom positions this device as an integrated networking SoC rather than a discrete microcontroller or general-purpose processor.

A system-on-chip is an integrated circuit that combines multiple functional blocks, such as processing, memory, communications, and peripheral interfaces, into one semiconductor device. Within the electronics hierarchy, an SoC is a type of integrated circuit and semiconductor. Integrating networking functions into a dedicated SoC can reduce component count, simplify hardware design, and centralize control of Ethernet-connected products.

The BCM58101B0KFBG is identified as a Broadcom LYNX-series device and is categorized as an embedded system-on-chip. Its B0 and KFBG suffixes are important commercial identifiers that distinguish this exact device from related BCM58101 configurations. A closely related catalog entry is BCM58101LB0KFBG, which appears in the BCM58101 family and is identified by DigiKey as another LYNX SoC configuration.

The exact processor core, clock rate, flash capacity, RAM capacity, Ethernet interfaces, transceiver arrangement, I/O voltage, and power requirements are not stated in the available manufacturer or distributor material. Those attributes should be taken from the Broadcom BCM58101 datasheet and product-selection guide before schematic capture or PCB layout begins. In particular, the presence of the word SoC in a distributor listing does not by itself define the number or type of Ethernet ports.

BCM58101-family devices are associated with embedded networking equipment and Broadcom LYNX solutions. Typical system contexts include Ethernet access equipment, customer-premises equipment, residential gateways, and other LAN-connected products that require integrated network processing. The exact product-level suitability depends on the interface, software-support, thermal, and regulatory requirements of the finished equipment.

Bulk packaging is identified for the BCM58101B0KFBG. Production designers should therefore confirm the package drawing, pin assignments, exposed-pad requirements, soldering profile, and assembly moisture requirements from the manufacturer documentation rather than inferring them from the distributor category. Confirming those details early prevents footprint, thermal-pad, and routing incompatibilities.

This page combines exact catalog identity, current commercial availability information, family-level comparison options, sourcing guidance, and structured design checklists for BCM58101B0KFBG. It is intended to accelerate engineering review while keeping package-specific decisions tied to the official Broadcom documentation.

直接替換替代品,適用於 BCM58101B0KFBG — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: BCM58101B0KFBG (相同外形與佔位) — 差異在於 Product Type.

Broadcom
Product Type: System-on-Chip (SoC) security processor
比較對象 BCM58101B0KFBG →

BCM58101LB0KFBG

✅ 直接替換
📦 Bulk; KFBG package code
Uses an L-modified BCM58101 ordering code rather than the B0 ordering code; the visible cross-reference data does not quantify the electrical effect, so compatibility requires manufacturer-ordering-code confirmation

📋 參考替代品(不在目錄中)

BCM58101B0KFBG 最大額定值與電氣特性

Manufacturer Broadcom Limited
Product Type Embedded system-on-chip (SoC)
Product Series BCM58101
Series Description LYNX
Manufacturer Part Number BCM58101B0KFBG
Device Category Embedded - System on Chip (SoC)
Order Code Designator B0
Package Suffix KFBG
Package Type Bulk
Quantity per Package 1 unit
Estimated Production Lead Time 49 weeks
Supply and Demand Status Balance
Popularity High

BCM58101B0KFBG 1 unit 腳位配置指南

BCM58101B0KFBG(1 unit 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。

BCM58101B0KFBG 的 1 unit 封裝腳位圖

無詳細腳位定義資料: BCM58101B0KFBG.

請參閱 資料表 以查看完整腳位配置。

典型應用

BCM58101B0KFBG 適用於 6 應用s: Residential Ethernet Gateway, Customer Premises Equipment, Industrial Ethernet Controller, Network Interface Appliance, Smart Home Edge Device, Network Monitoring Equipment.

🌐

Residential Ethernet Gateway

BCM58101B0KFBG is a candidate for an embedded residential gateway because the Broadcom LYNX family is associated with dedicated networking-system-on-chip functions. Integrating the network processing element can simplify a design that otherwise requires a separate processor and multiple interface devices. The BCM58101 configuration must match the required Ethernet-port count, PHY arrangement, management interface, memory, and protocol stack. Because the catalog data does not state port quantity or processor performance, engineers should validate the complete interface map in the Broadcom BCM58101 documentation before finalizing the architecture.

🏭

Customer Premises Equipment

BCM58101B0KFBG can support a customer-premises-equipment architecture when the device's exact Ethernet, serial, and management interfaces suit the product. A dedicated LYNX networking SoC can centralize traffic handling and reduce the amount of discrete interface circuitry compared with a general-purpose processor implementation. The engineering review must confirm supported PHY types, cable diagnostics, firmware availability, security features, and operating-temperature requirements. Bulk packaging also makes the device relevant to higher-volume production planning, subject to manufacturer order-code confirmation.

🏭

Industrial Ethernet Controller

BCM58101B0KFBG is a potential fit for industrial Ethernet equipment that requires a dedicated network-processing element rather than a general-purpose microcontroller. The product could serve as the central communications controller in a managed network interface, provided its documented interface set matches the industrial system. Check the number of supported Ethernet channels, integrated PHY requirements, external memory interface, operating range, and industrial qualification status. The confirmed 49-week production lead-time estimate makes early component planning especially important for industrial programs with long qualification cycles.

🖥️

Network Interface Appliance

BCM58101B0KFBG may fit a dedicated network-interface appliance when its Broadcom LYNX functions align with the appliance's traffic-processing and connectivity requirements. Such designs benefit from integrating networking logic into one SoC while retaining a defined hardware interface for external memory, transceivers, and management circuitry. Verification should cover boot sequencing, firmware loading, thermal behavior, Ethernet PHY configuration, and all ordering-code-dependent features. Because the available technical information does not enumerate clock speed, memory capacity, or port count, those values must not be assumed during schematic design.

🧩

Smart Home Edge Device

BCM58101B0KFBG is suitable for consideration in a smart-home or connected-home edge product that needs stable Ethernet connectivity and a dedicated control SoC. Ethernet can provide a reliable wired control path when Wi-Fi coverage is uncertain, while the dedicated LYNX SoC may reduce host-processor overhead. The implementation must confirm whether the exact BCM58101 B0 configuration supports the required PHY standard, management protocol, bootloader, and software image format. Mechanical and thermal design should also follow the official package drawing because the distributor category does not disclose pin count or pad layout.

📡

Network Monitoring Equipment

BCM58101B0KFBG may be used in monitoring equipment that must observe, aggregate, or manage Ethernet traffic through a dedicated embedded processor. The integrated SoC architecture can reduce board-level complexity compared with separate network and control devices, but diagnostic feature support must be verified against the exact Broadcom ordering code. Engineering teams should review counters, traffic-management functions, management interfaces, firmware maintenance, and recovery behavior. Production planning should account for the listed 49-week estimated lead time and validate long-term availability through the manufacturer's lifecycle information.

What is BCM58101B0KFBG?
BCM58101B0KFBG is a Broadcom Limited embedded system-on-chip in the BCM58101 LYNX family, supplied in bulk packaging. The exact catalog entry identifies it as a system-on-chip IC and groups it under embedded SoC. According to the Broadcom product identifier and distributor categorization, the B0 code and KFBG suffix distinguish this configuration from other BCM58101 variants. Design engineers should consult the Broadcom BCM58101 documentation for the processor, Ethernet interface, memory, electrical limits, and pin assignments before beginning a new PCB.
Where can I download the BCM58101B0KFBG datasheet?
The BCM58101B0KFBG datasheet is available through the manufacturer-linked documentation entry for this exact Broadcom part. The available product listing identifies the manufacturer as Broadcom Limited and provides access to the component datasheet, while Mouser identifies the device as a Broadcom/Avago LYNX networking module. For design sign-off, use the official Broadcom PDF containing the BCM58101 family pinout, electrical characteristics, interface definitions, and package drawing.
Where can I find the BCM58101B0KFBG pinout?
The BCM58101B0KFBG pinout must be taken from the official Broadcom BCM58101 family pin-description table and package drawing. The KFBG ordering suffix identifies the package configuration, but it does not by itself provide the numerical pin map in a distributor listing. Before assigning PCB tracks, verify signal names, supply rails, ground pads, reset, management interfaces, and exposed thermal or ground connections against the exact B0 revision.
Is BCM58101LB0KFBG a drop-in replacement for BCM58101B0KFBG?
BCM58101LB0KFBG is the closest identified same-family alternative, but it should not be treated as an unconditional drop-in replacement without comparing its ordering code, revision, grade, interface configuration, and supply requirements. Both parts are Broadcom BCM58101 LYNX SoC catalog entries with the same KFBG package suffix. The visible comparison data does not establish every electrical or pin-level parameter, so perform a full BCM58101 ordering-information review before production substitution.
What is the best alternative to BCM58101B0KFBG?
No independently confirmed cross-brand drop-in equivalent was identified for BCM58101B0KFBG. BCM58101LB0KFBG is the closest same-manufacturer family candidate, while BCM58103B0KFBG is a related Broadcom LYNX comparison part that may differ in functionality. A true replacement must preserve the footprint, pin assignments, electrical limits, firmware support, Ethernet configuration, and regulatory requirements. Use the Request a Quote form on this page when sourcing the exact device or discussing an engineering substitution.
BCM58101B0KFBG vs BCM58103B0KFBG: which one fits my design?
BCM58101B0KFBG and BCM58103B0KFBG are both Broadcom LYNX-related catalog devices, but the available comparison information does not establish identical electrical or functional ratings. Select BCM58101B0KFBG when its documented interface set and firmware requirements match the target product. Consider BCM58103B0KFBG only after reviewing its manufacturer documentation for port configuration, processing capability, memory, power, package, and software support.
When should I choose BCM58101B0KFBG over another LYNX SoC?
Choose BCM58101B0KFBG when the Broadcom BCM58101 feature set, exact B0 ordering configuration, KFBG footprint, and required networking functions align with the finished product. Its primary advantage over an unrelated processor is the integration of dedicated networking SoC functions, while the advantage over another LYNX device depends on the specific interface and software differences. Final selection requires comparing the exact Broadcom product-selection table against the system requirements.
Is BCM58101B0KFBG suitable for Ethernet networking equipment?
BCM58101B0KFBG is a Broadcom LYNX networking system-on-chip and is therefore a candidate for embedded Ethernet networking equipment. Suitability depends on the number and type of Ethernet interfaces, PHY integration, serial links, memory requirements, protocol support, and software availability for the exact BCM58101 B0 configuration. These application-specific details must be confirmed in the manufacturer documentation before the device is approved for a new design.
How much power does BCM58101B0KFBG consume?
The power consumption of BCM58101B0KFBG depends on the selected supply rails, processor activity, Ethernet traffic, enabled interfaces, and operating temperature. The available catalog information does not state a numerical current or power rating, so no operating-current value should be assumed. Use the Broadcom BCM58101 electrical characteristics for worst-case supply-current budgets and thermal design, and include the Ethernet PHY or magnetics requirements in the complete system power calculation.
What is the lead time for BCM58101B0KFBG?
The current component listing reports an estimated production lead time of 49 weeks for BCM58101B0KFBG. This estimate indicates a potentially long planning horizon and should be confirmed for the selected configuration and order quantity. Use the Request a Quote form on this page to request the current lead time, minimum order quantity, and delivery schedule rather than relying on an inventory statement alone.
Is BCM58101B0KFBG in stock?
BCM58101B0KFBG is listed with current availability information across several component channels, and one catalog entry identifies it as in stock. Availability can change quickly and may differ by package configuration and order quantity. Submit the required quantity through the Request a Quote form on this page for a current supply confirmation and a suitable delivery plan.
What is the price of BCM58101B0KFBG?
The current commercial quote for BCM58101B0KFBG is obtained through the Request a Quote form on this page. The visible listing shows a starting amount, but that figure does not establish the unit price at a specified quantity and therefore is not treated as a quantity-break price. Request a quote with the required part number, quantity, package configuration, and delivery location so the current commercial offer can be prepared.
Where can I buy BCM58101B0KFBG online?
BCM58101B0KFBG can be requested through the Request a Quote form on this XAIPART page using the exact manufacturer part number BCM58101B0KFBG. Include the required quantity, delivery location, and any date code or traceability requirements. This avoids confusing the B0KFBG ordering code with the related BCM58101LB0KFBG variant, whose qualification and configuration may differ.
What can replace BCM58101B0KFBG in an existing design?
The only closely identified family candidate is BCM58101LB0KFBG, which shares the BCM58101 series and KFBG package suffix. However, the L ordering modification may represent a different grade, qualification, configuration, or production code, so a footprint match alone is not sufficient. Before replacing BCM58101B0KFBG, compare the exact ordering table, pinout, electrical limits, Ethernet configuration, firmware, thermal limits, and lifecycle requirements with the manufacturer documentation.
What are the key specifications of BCM58101B0KFBG that engineers should know?
BCM58101B0KFBG is a Broadcom Limited BCM58101 LYNX embedded SoC supplied in a bulk package. The confirmed catalog attributes are the B0 order code, KFBG suffix, bulk packaging, one unit per package, high popularity, balanced supply and demand, and an estimated 49-week production lead time. Core frequency, memory, Ethernet ports, I/O levels, temperature range, and package dimensions are not published in the accessible material and must be taken from the manufacturer datasheet.

工程參考資料,適用於 BCM58101B0KFBG — 比較、設計指引及合規資訊。

選型指南

Choose BCM58101B0KFBG when the exact Broadcom BCM58101 B0 ordering configuration provides the Ethernet interfaces, processing resources, memory interfaces, software support, and package layout required by the product. It is particularly relevant to embedded Ethernet equipment where a dedicated LYNX networking SoC can replace a more complex combination of general-purpose processing and interface components. Review BCM58101LB0KFBG only as a same-family candidate, because the L-modified ordering code may change grade, qualification, firmware, or another controlled attribute. BCM58103B0KFBG is a related LYNX comparison device, not a confirmed substitute; its interface set and processing capabilities must be matched against the system requirements. For any replacement, confirm the exact ordering code, pinout, electrical limits, exposed-pad layout, Ethernet features, operating-temperature grade, software roadmap, and lifecycle status. With the listed 49-week production lead-time estimate, schedule component review early and avoid making an unqualified last-minute substitution.

與替代品比較

參數 本產品 BCM58101LB0KFBG
Package Bulk; KFBG package code Bulk; KFBG package code
Brand Broadcom Broadcom
Product Type Embedded system-on-chip (SoC) Embedded system-on-chip (SoC)
Product Series BCM58101 / LYNX BCM58101 / LYNX
Ordering Code B0KFBG LB0KFBG

主要差異化特點

  • Exact Broadcom LYNX networking-SoC identity (對比General-purpose SoC)
  • Closest identified same-family order code (對比BCM58101LB0KFBG)
  • Cataloged production-planning information (對比BCM58103B0KFBG)

設計說明

Do not begin routing from the KFBG suffix alone. Download the official Broadcom BCM58101 package drawing for the exact B0 configuration, then verify every pin number, exposed pad, thermal land, and keepout in the PCB library. Pay particular attention to high-speed Ethernet nets, clock inputs, supply-return paths, and any pins that change function according to the ordering code. A symbol-and-footprint audit against the manufacturer pin-description table is essential before fabrication release.

Build the power tree from the manufacturer electrical characteristics and the complete Ethernet interface design, including PHY, magnetics, isolation, and transceiver requirements where applicable. The visible product information does not provide operating current, so do not assign a regulator rating from memory. Evaluate worst-case traffic, startup, brownout, and thermal conditions, and include margin for adjacent circuitry. Confirm the number and voltage of supply rails before assigning decoupling capacitors or selecting a power-management solution.

Treat BCM58101B0KFBG and BCM58101LB0KFBG as distinct orderable configurations until Broadcom's ordering table proves otherwise. The visible L designation may affect grade, qualification, firmware, lifecycle, or another manufacturing attribute, and a shared package suffix does not establish electrical equivalence. For any proposed substitution, compare the exact MPN, revision, interface map, temperature range, software support, and lifecycle status, then obtain written manufacturer or authorized-channel confirmation before production use.

Use the manufacturer thermal model for the exact package and board construction rather than estimating from a generic package type. Provide continuous copper beneath exposed thermal features, follow the recommended via pattern, and keep the LYNX SoC's local temperature rise below its rated maximum in the worst operating mode. Ethernet traffic, supply loss, and elevated ambient temperature can change dissipation over product life. Document the assumed airflow, board layer count, copper area, and ambient temperature in the thermal verification report.

Plan Ethernet and clock routing from the reference design and interface documentation for the exact BCM58101 configuration. Use short, continuous reference-plane paths, controlled impedance, appropriate via transitions, and isolation from noisy switching or high-current return paths. If the SoC works with external PHYs or magnetics, coordinate the digital interface, analog supply domains, and reset timing across the complete channel. Signal-integrity sign-off must use the final stack-up, component placement, enclosure, and cabling environment.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The available product listing contains a REACH-status field but does not provide a definitive value. No explicit RoHS, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement is stated for this exact device.

資料驗證日期: 2026-11-20 — 資料由 XAIPART 元件工程團隊驗證及整理

相關搜尋

BCM58101B0KFBG datasheet BCM58101B0KFBG pinout BCM58101B0KFBG datasheet pdf BCM58101B0KFBG equivalent BCM58101B0KFBG replacement BCM58101B0KFBG cross reference BCM58101B0KFBG footprint BCM58101B0KFBG price BCM58101B0KFBG stock Broadcom BCM58101B0KFBG BCM58101B0KFBG vs BCM58103B0KFBG BCM58101 KFBG package pinout BCM58101B0KFBG lead time BCM58101B0KFBG Ethernet SoC what is BCM58101B0KFBG

相關元件與詞彙

Broadcom Broadcom Limited BCM58101B0KFBG BCM58101LB0KFBG BCM58103B0KFBG BCM58101 LYNX System on Chip SoC Embedded system-on-chip Broadcom BCM58101 networking module Ethernet networking Embedded networking equipment Customer premises equipment B0 order code KFBG package code Bulk package Embedded SoC Network interface appliance Ethernet interface Processor core Flash memory RAM Lead time Pinout
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情