CD40103BE - 8-Bit Synchronous Down Counter | Texas Instruments
MPN: CD40103BE ✓ 啟用中CD40103BE 概覽
A binary counter is a digital logic component that stores a sequence of binary states. A synchronous down counter advances its count on the active clock edge rather than through a ripple between multiple stages, helping maintain predictable timing in control and sequencing systems. The CD40103BE belongs to the CMOS 4000-series logic family and combines counter state, parallel preset loading, and terminal-count signaling in one integrated circuit.
The principal functional characteristics are an 8-bit counting range, eight internally cascaded synchronous stages, positive-edge triggering, and one 16-PDIP package. Preset inputs allow a parallel count value to be loaded for an arbitrary starting state. This makes the device useful when a system must count downward from a selected value rather than always beginning at the maximum count. The manufacturer identifies the device as a presettable 8-stage synchronous down counter.
Compared with a ripple counter assembled from separate flip-flops, the synchronous architecture centralizes state transitions in one CMOS IC. That is valuable in timing-sensitive systems because the counter does not depend on cumulative propagation delays through eight external stages. The terminal-count output can also be used to detect the end of a counting interval, while the preset function establishes the next operating sequence without external decoding logic.
Typical uses include industrial sequence controllers, batch and process timers, repetitive test equipment, digital chronometers, laboratory pulse counters, and programmable timing modules. The device can also serve as a reusable down-counting element in larger cascaded systems. Designs should preserve the truth-table distinction between clock, preset, count, and terminal-count functions and should account for the behavior required during preset loading.
For through-hole implementation, verify every connection against the manufacturer pin-description table and observe the specified supply and input-voltage limits. Pay particular attention to how the preset and asynchronous controls interact with the clock. Do not infer timing limits or logic thresholds without consulting the current manufacturer datasheet, particularly when replacing an existing counter in safety-critical or production equipment.
This product page combines the manufacturer function description, verified package and ordering information, practical application guidance, and a conservative replacement analysis. It also distinguishes a genuine same-footprint option from related counters that use different packages or function as complementary up counters.
直接替換替代品,適用於 CD40103BE — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: CD40103BE (相同外形與佔位) — 差異在於 Preset Capability.
CD40103BEE4
✅ 直接替換📋 參考替代品(不在目錄中)
CD40103BE 最大額定值與電氣特性
| Logic Type | CMOS binary synchronous down counter |
| Number of Counter Elements | 1 element |
| Counting Stages | 8 stages |
| Count Width | 8 bits |
| Count Direction | Down |
| Clock Edge | Positive edge |
| Preset Capability | Yes, presettable parallel count |
| Terminal Count Output | Active when the internal count is zero |
| 封裝 | 16-PDIP (0.300 inch, 7.62 mm pitch) |
| 安裝類型 | Through-hole |
CD40103BE 16-pdip (0.300 inch, 7.62 mm pitch) 腳位配置指南
CD40103BE(16-pdip (0.300 inch, 7.62 mm pitch) 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: CD40103BE.
請參閱 資料表 以查看完整腳位配置。
典型應用
CD40103BE 適用於 6 應用s: Industrial Sequence Controller, Programmable Batch Timer, Laboratory Pulse Counter, Digital Chronometer, Repetitive Test Equipment, Process Timing and Retrigger Modules.
Industrial Sequence Controller
The CD40103BE fits an industrial down-sequence controller because it combines an 8-bit count state, synchronous positive-edge decrementing, preset loading, and terminal-count indication in one 16-PDIP device. A controller can preset the counter to a production-cycle duration, decrement it on a qualified clock, and use the terminal-count output to mark the end of that interval. The integrated eight-stage architecture avoids the cumulative delay of separate ripple stages. During design, verify the exact preset and clock truth table, provide clean reset behavior, and keep the through-hole footprint unobstructed for maintenance in industrial control equipment.
推薦
Programmable Batch Timer
The CD40103BE is useful in a programmable batch timer because its parallel preset capability establishes the initial count and its synchronous down-counting action provides a defined sequence toward zero. A terminal-count signal can trigger a batch-end event, relay, display update, or next-process command. The 8-bit count supports 256 programmable states, while positive-edge triggering helps separate state changes from the active clock period. Designers should qualify any external start, reset, and preset controls, confirm the required minimum clock pulse widths, and prevent switch bounce from introducing unintended count transitions.
推薦
Laboratory Pulse Counter
The CD40103BE can serve as the central pulse-counting element in laboratory instrumentation because it tracks eight binary bits and changes state on each positive clock edge. Preset loading allows an instrument to count from a selected baseline, while terminal-count indication simplifies event-completion detection. Its 16-PDIP package is convenient for prototyping and repair using standard through-hole assembly practices. The counter does not qualify or isolate incoming signals, so a suitable clock conditioner may be required in noisy test environments. Timing margins must be checked against the longest intended clock period and the required end-to-end counter delay.
推薦
Digital Chronometer
A digital chronometer can use the CD40103BE for elapsed-event counting because the device counts downward from a preset value on each positive clock edge and identifies the zero count. This supports timing intervals expressed as a number of clock periods, making the counter useful when the system clock already provides a stable time base. Preset controls can establish different intervals without changing the external counter hardware. The design should define whether the terminal-count output is level-held or used to trigger a latch, and it should account for switch bounce, reset priority, and clock-source tolerance when establishing the displayed interval.
推薦
Repetitive Test Equipment
The CD40103BE is appropriate for repetitive test equipment that must execute a fixed number of events or clock intervals. The parallel preset inputs establish the run length, the synchronous counter decrements once per qualified positive clock edge, and the terminal-count output marks completion. Because the count is represented internally in eight binary stages, test-control logic can observe progress without reconstructing the count from separate flip-flops. Designers should keep the clock distribution short, validate signal timing against the manufacturer limits, and include a defined reset strategy so an aborted test cannot accidentally continue from a partially loaded state.
推薦
Process Timing and Retrigger Modules
The CD40103BE supports retriggerable process-timing modules by combining a preset countdown with a terminal-count event. After a trigger presets the counter, successive positive clock edges move the count toward zero, allowing a downstream actuator or alarm to be initiated at the end of a defined interval. The integrated synchronous stages provide consistent state advancement without separately routing eight counter outputs. To make the module reliable, define preset priority relative to the clock, debounce external trigger inputs, and verify operation across the voltage and temperature limits required by the target process equipment.
推薦
推薦產品摘要
工程參考資料,適用於 CD40103BE — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | CD40103BEE4 |
|---|---|---|
| Package | 16-PDIP (0.300 inch, 7.62 mm pitch) | 16-PDIP (0.300 inch, 7.62 mm pitch) |
| Brand | Texas Instruments | Texas Instruments |
| Counter Type | 8-stage binary synchronous down counter | 8-stage binary synchronous down counter |
| Count Width | 8 bits | 8 bits |
| Clock Edge | Positive edge | Positive edge |
| Preset Capability | Yes | Yes |
| Terminal Count | Active at zero count | Active at zero count |
| Technology | CMOS | CMOS |
| Mounting Type | Through-hole | Through-hole |
主要差異化特點
- Direct same-family replacement candidate (對比CD40103BEE4)
- Integrated synchronous count state (對比CD40103BEG4)
- Programmable starting interval (對比SN74LS93DR)
設計說明
Do not treat every 16-pin 40103 counter as a footprint-compatible substitute. HCF40103BEY implements the general counter function but uses a different package construction from the CD40103BE 16-PDIP. Compare the manufacturer pin drawings, dimensions, and orientation markings before approval. Also verify preset priority, clock-edge behavior, and terminal-count polarity; a matching pin count alone does not establish interchangeability.
Route the clock as a short, low-noise trace and keep it away from switching-node and high-current return paths. Because preset and count inputs may change near a clock edge, use the manufacturer truth table to identify setup and hold requirements. Through-hole construction permits generous component spacing, but adequate clearance around the DIP socket remains important for probe access and maintenance.
Treat mechanical switches, relays, and long wiring as possible sources of multiple clock edges. Debounce or condition external trigger signals before they reach the clock or preset inputs. The manufacturer’s maximum clock frequency and propagation-delay limits must be checked against the longest intended clock period and the worst-case counter transition; those numerical limits are not stated in the product listing and must be obtained from the datasheet.
合規資訊
The manufacturer and distributor product information identifies the CD40103BE as a CMOS logic counter in a 16-PDIP package, but the product listing does not provide specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations.