Texas Instruments

CD4024BEX - 7-Stage 24MHz CMOS Counter | Texas Instruments

MPN: CD4024BEX ✓ 啟用中
3 V to 18 V Vdss PDIP-14, 14 pins Package Falling edge Speed
MOQ: 1 |

CD4024BEX 概覽

Texas Instruments CD4024BEX is a 7-stage CMOS ripple-carry binary counter with a 24 MHz maximum count rate, falling-edge clock triggering, and a 3 V to 18 V operating supply range in a PDIP-14 through-hole package. It provides four parallel binary outputs and one independently controlled parallel output for a seven-bit counting application. The wide CMOS supply range allows operation from standard 5 V and 10 V systems, while the through-hole package supports conventional leaded assembly and socket-based prototyping.

A binary counter is a sequential digital-logic circuit that records successive clock pulses as binary values. A ripple-carry counter implements this function by connecting multiple toggle stages, with each stage advancing when the preceding stage changes. The CD4000 CMOS family belongs to the broader hierarchy of counter ICs, digital logic ICs, integrated circuits, and semiconductors. Its asynchronous ripple architecture is useful when simple event counting, frequency division, timing, or programmable sequencing is required.

The CD4024BEX combines a 7-stage count capacity with a stated maximum operating frequency of 24 MHz. Its four parallel binary outputs provide the lower four count bits, while the parallel output can represent the terminal count state. Falling-edge clock triggering defines the active transition for advancing the count. Operation across 3 V to 18 V gives designers flexibility across multiple supply domains, provided that input levels and timing requirements are evaluated for the selected supply voltage.

The ripple-carry implementation uses cascaded counter stages, so propagation delay accumulates through the chain. This is more important than raw clock frequency when the circuit must produce a clean decoded event or the carry output must be timed precisely. The counter should be clocked only while reset is inactive, and unused inputs must be held at defined logic levels. CMOS devices require controlled input transitions to prevent transient current and output instability.

Typical uses include digital timers, event counters, industrial sequence controllers, laboratory pulse-counting equipment, frequency dividers, and digital clock subsystems. It can also serve as a programmable event-counting element when a downstream system derives timing or sequencing information from the binary and carry outputs. Its 24 MHz capability supports substantially faster event counting than conventional low-frequency mechanical or slow CMOS timer systems.

For robust PCB implementation, place the clock and reset traces away from output and power-return paths, especially when the counter drives long traces or sensitive clock-distribution circuitry. Confirm the maximum clock frequency at the actual supply voltage, and account for accumulated propagation delay in cascaded decoding logic. The Request a Quote form on this page supports current price, stock, and lead-time requests for production planning.

This page combines the CD4024BEX operating limits, package information, pin-compatible alternatives, comparison parameters, and practical counter-design guidance. These engineering-focused details help buyers assess the counter for timers, automation, digital clocks, and pulse-counting systems while preserving a consistent PDIP-14 board design.

直接替換替代品,適用於 CD4024BEX — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: CD4024BEX (相同外形與佔位) — 差異在於 Logic Family, Clock Edge, Counter Type, Mounting Type, Package.

onsemi
Logic Family: CMOS
Clock Edge: Negative edge
Counter Type: Binary counter
比較對象 CD4024BEX →
Texas Instruments
Logic Family: CD4000-series CMOS
Counter Type: 7-stage ripple-carry binary counter/divider
比較對象 CD4024BEX →

CD4024BE

✅ 直接替換
Texas Instruments
📦 PDIP-14
7-stage ripple-carry binary counter/divider · 7 stages · 7 bits · 3 V to 18 V · Negative-edge triggered · High-level reset · CD4000-series CMOS · -55 °C to +125 °C

聯絡詢價

查看資料表 →

CD4024BP

✅ 直接替換
📦 PDIP-14
Same 3 V to 18 V, 7-stage, 24 MHz-class counter family; exact ordering code and qualification details require datasheet confirmation

📋 參考替代品(不在目錄中)

HCF4024BEY

✅ 直接替換
📦 PDIP-14
Comparable 7-stage CMOS ripple counter with 14-lead footprint; manufacturer, qualification markings, and exact timing limits differ

📋 參考替代品(不在目錄中)

HEF4024BT

✅ 直接替換
📦 PDIP-14
Comparable 7-stage CMOS binary ripple counter in a 14-lead package; manufacturer and ordering qualifications differ from CD4024BEX

📋 參考替代品(不在目錄中)

CD4024BCM

✅ 直接替換
onsemi
📦 PDIP-14
Binary counter · 1 element · 7 bit · Negative edge · CMOS · 14-SOIC · 14 pins · Surface mount

聯絡詢價

查看資料表 →

CD4024BEX 最大額定值與電氣特性

Product Type 7-stage CMOS ripple-carry binary counter
Logic Family CD4000 CMOS series
Supply Voltage Range 3 V to 18 V
Maximum Count Rate 24 MHz
Clock Edge Falling edge
Counter Stages 7 stages
Parallel Output Bits 4 bits
封裝 PDIP-14, 14 pins
安裝類型 Through-hole
輸出類型 Binary counter and carry outputs

CD4024BEX pdip-14, 14 pins 腳位配置指南

CD4024BEX(pdip-14, 14 pins 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。

CD4024BEX 的 pdip-14, 14 pins 封裝腳位圖

無詳細腳位定義資料: CD4024BEX.

請參閱 資料表 以查看完整腳位配置。

典型應用

CD4024BEX 適用於 6 應用s: Digital Event Counter, Programmable Timer, Frequency Divider, Industrial Sequence Control, Digital Clock Divider, Laboratory Pulse Counter.

🔧

Digital Event Counter

The CD4024BEX fits digital event-counting systems because its seven-stage counter can retain successive binary states from a repetitive clock or event signal. A 24 MHz stated count rate supports fast input pulses, while the 3 V to 18 V supply range allows operation across common CMOS voltage choices. The four parallel outputs can be decoded into decade, hexadecimal, or custom event thresholds. Falling-edge triggering gives the system a clearly defined sampling instant. In a production design, calculate the maximum expected event rate, preserve clean clock edges, and verify that downstream decoders account for ripple propagation delay.

⚡

Programmable Timer

The CD4024BEX can form the counting core of a programmable timer by clocking a fixed-frequency reference and decoding selected binary states. Seven stages and a 24 MHz count rate cover short timing intervals with sufficient counting headroom, while the 3 V to 18 V operating range supports integration with conventional CMOS logic. Reset establishes the initial count, and the parallel or terminal count output triggers an external latch or control action. Choose the reference frequency to keep worst-case logic transitions comfortably below the counter's stated maximum count rate, and include settling time for decoded outputs.

📡

Frequency Divider

A CD4024BEX can divide a periodic input frequency by using one counter stage as a toggle and observing the resulting divided waveform. The stated 24 MHz maximum count rate provides substantial margin for many clock-divider tasks, and the falling-edge clock input establishes deterministic advancement. The seven-stage architecture also permits multiple divide ratios derived from binary outputs. For clean division, the output clock edge should not be fed directly into a noisy or combinational network, and the circuit should use Schmitt-triggered buffering where practical. Confirm timing at the actual 3 V to 18 V operating point and avoid relying on decode transitions as precision clock edges.

🏭

Industrial Sequence Control

The CD4024BEX supports industrial sequence control by counting process events and presenting parallel binary states to control logic. Its 7-stage capacity permits extended event sequences, and its 24 MHz count capability is suitable for faster machine-sensor events than a basic mechanical counter can track. A 3 V to 18 V supply range supports multiple industrial logic levels, although system designers must verify temperature and noise-margin requirements. Tie unused inputs to defined levels, provide deterministic reset behavior, and isolate long sensor wiring from the clock path to prevent induced pulses from corrupting the count.

🖥️

Digital Clock Divider

The CD4024BEX can divide a stable oscillator into lower-rate timing signals for digital clocks, sequencing networks, and repetitive control systems. Its 7-stage architecture allows binary tap selection, and the falling-edge clock input supports predictable state changes. With a 3 V to 18 V supply range, the counter can operate in established CMOS environments, but power bypassing and clock-edge quality remain essential. Use a crystal oscillator or other low-jitter source when timing accuracy matters, buffer stage outputs before driving fanout, and validate the final divided waveform's rise time, duty cycle, and jitter at system level.

🔬

Laboratory Pulse Counter

The CD4024BEX is appropriate for laboratory pulse-counting and measurement front ends because it can count events at up to the stated 24 MHz rate and retain the result in parallel binary form. The 3 V to 18 V operating range supports integration with laboratory logic levels, while the PDIP-14 package simplifies breadboard and through-hole prototyping. A downstream microcontroller or display can read the counter outputs after a defined measurement interval. Validate input amplitude, edge rate, and common-mode limits before connection to test equipment, and add buffering when cable capacitance or source impedance could distort the 24 MHz maximum-rate assumption.

What is the operating voltage of CD4024BEX?
The CD4024BEX operates from 3 V to 18 V, giving it a broad CMOS supply range for 5 V, 10 V, and other compatible industrial logic systems. According to the Texas Instruments CD4024 datasheet, the permitted supply voltage is a principal selection criterion for this counter. Confirm the clock, reset, and output signal levels against the chosen supply before designing the circuit.
What is the maximum frequency of CD4024BEX?
The CD4024BEX has a stated maximum count rate of 24 MHz. This figure describes the operating frequency reported for the counter and makes the device suitable for fast pulse counting, digital timing, and frequency-division circuits. According to the Texas Instruments CD4024 datasheet, verify the timing limits at the actual supply voltage and include the delays of any decoding logic driven by the counter outputs.
Where can I download the CD4024BEX datasheet PDF?
The CD4024BEX datasheet PDF is available through the Texas Instruments CD4024 datasheet link on this page, with archived PDF copies also listed in the technical resources. The document describes the CD4000 CMOS ripple-carry binary counter family, including supply-voltage, package, pin, and operating characteristics. Use the manufacturer document as the controlling reference when assigning pins or checking absolute maximum ratings.
Where can I find the CD4024BEX pinout?
The CD4024BEX pin assignment is found in the manufacturer CD4024 datasheet under the package and pin-description information. The device is a 14-pin PDIP counter, and its pinout should be transcribed directly from that document before PCB routing. The Request a Quote form on this page can be used to obtain current production and sourcing information.
What is the CD4024BEX used for?
The CD4024BEX is used for event counting, binary counting, timing, frequency division, and sequential control. Its 7-stage CMOS ripple-counter architecture includes four parallel binary outputs and a terminal count output, with falling-edge clock triggering and a 24 MHz stated count rate. These functions suit digital timers, industrial controllers, laboratory counters, and programmable sequence circuits.
CD4024BEX vs CD4024BE - which one should I choose?
Choose CD4024BEX for the exact leaded ordering code identified on this page, while CD4024BE is the closely related family version listed in the manufacturer documentation. Both belong to the 3 V to 18 V, 7-stage CMOS counter family and use the same 14-pin through-hole format. Packaging, marking, temperature, and purchasing conditions should be checked on the relevant manufacturer datasheet before substitution.
When should I choose CD4024BEX over a synchronous counter?
Choose CD4024BEX when the design needs a simple seven-stage ripple counter, moderate counting speed, and a 14-pin through-hole implementation rather than decoded outputs with uniform timing. A synchronous counter is preferable when every output must change with matched propagation delay. The CD4024BEX supports up to 24 MHz and a 3 V to 18 V supply, but accumulated ripple delay must be included in critical timing paths.
Is CD4024BEX suitable for industrial automation?
The CD4024BEX is suitable for many industrial automation functions when its 3 V to 18 V operating range, 24 MHz count capability, and 7-stage counting architecture meet the control requirements. According to the Texas Instruments CD4024 datasheet, the device is a general-purpose CMOS counter. Confirm temperature range, noise margins, reset behavior, and long-term availability for the specific industrial equipment program.
What can replace CD4024BEX?
A drop-in replacement for CD4024BEX must provide the same 14-lead physical footprint, matching pin functions, a compatible 3 V to 18 V supply range, and equivalent counting performance. CD4024BE and HCF4024BEY are identified 14-pin ripple-counter candidates for comparison. Verify exact pinout, clock edge, reset polarity, operating temperature, and lifecycle status before approving a replacement for production.
Is HCF4024BEY the same as CD4024BEX?
HCF4024BEY is a comparable 14-pin CMOS binary ripple counter from a different manufacturer, but it is not automatically identical in ordering, qualification, or manufacturing details. The CD4024BEX provides a 3 V to 18 V operating range and a 24 MHz stated count rate. Confirm the HCF4024BEY pin functions, supply limits, timing, temperature range, and required qualifications before treating it as a drop-in replacement.
What are the key specifications of CD4024BEX that engineers should know?
The key CD4024BEX specifications are its 3 V to 18 V supply range, 24 MHz maximum count rate, falling-edge clock triggering, seven counter stages, four parallel binary outputs, and PDIP-14 through-hole package. It is a CD4000 CMOS ripple-carry binary counter. According to the Texas Instruments CD4024 datasheet, these characteristics determine its suitability for timers, dividers, event counters, and automation logic.
How do I design a CD4024BEX counter circuit?
Design the CD4024BEX circuit by applying the defined clock waveform to the falling-edge clock input, holding reset inactive for normal counting, and using the binary and carry outputs for decoding. Keep clock and reset routing short and away from sensitive return paths. The manufacturer datasheet identifies the 24 MHz maximum rate, but the actual design must also account for supply voltage and accumulated ripple-stage delay.
What is the price of CD4024BEX?
Use the Request a Quote form on this page to request the current CD4024BEX unit price, quantity pricing, stock, and lead time. Commercial terms can change with order quantity and market conditions, so the live quote provides the appropriate purchasing basis. The product identification and technical documentation remain available for technical review while the quotation is prepared.
Where can I buy CD4024BEX online?
Use the Request a Quote form on this page to request CD4024BEX availability, pricing, and lead time for your required quantity. The form supports an engineering and purchasing review based on the exact PDIP-14 ordering code. Submit the target quantity, delivery location, and production schedule so the quotation can reflect the appropriate commercial terms.
What is the lead time and stock status for CD4024BEX?
Request the current CD4024BEX stock position, lead time, and minimum order quantity through the Request a Quote form on this page. Lead time depends on the requested quantity, procurement schedule, and current manufacturer or channel availability. For new production programs, request an allocation and delivery schedule before committing the component to the released BOM.

工程參考資料,適用於 CD4024BEX — 比較、設計指引及合規資訊。

選型指南

Choose CD4024BEX when the design requires a 7-stage CMOS ripple counter with a 3 V to 18 V supply range, falling-edge clock triggering, four parallel binary outputs, and a PDIP-14 footprint. It is a practical choice for timers, dividers, event counters, and automation logic where a through-hole package and a stated 24 MHz count rate are priorities. CD4024BE is the closest same-manufacturer ordering alternative when that suffix is preferred and its qualification terms fit the program. HCF4024BEY offers a cross-manufacturer sourcing path in a comparable 14-pin format, while HEF4024BT and CD4024BC may be considered when supply, timing, and qualification requirements are confirmed. For any substitution, verify the complete pinout, reset polarity, clock edge, propagation delay, operating-temperature range, and production status. If decoded outputs must switch with uniform timing, choose a synchronous counter instead of a ripple architecture.

與替代品比較

參數 本產品 CD4024BE CD4024BP HCF4024BEY HEF4024BT CD4024BC
Package PDIP-14 PDIP-14 PDIP-14 PDIP-14 PDIP-14 PDIP-14
Brand Texas Instruments Texas Instruments Texas Instruments STMicroelectronics Nexperia onsemi
Product Type CMOS ripple-carry binary counter CMOS ripple-carry binary counter CMOS ripple-carry binary counter CMOS binary ripple counter CMOS binary ripple counter CMOS binary ripple counter
Counter Stages 7 stages 7 stages 7 stages 7 stages 7 stages 7 stages
Parallel Output Bits 4 bits 4 bits 4 bits 4 bits 4 bits 4 bits
Mounting Type Through-hole Through-hole Through-hole Through-hole Through-hole Through-hole

主要差異化特點

  • High-speed seven-stage counting in a standard 14-pin through-hole package (對比CD4024BE)
  • Cross-manufacturer sourcing option with the same leaded counter format (對比HCF4024BEY)
  • Wide supply-voltage operating range for legacy CMOS system integration (對比HEF4024BT)

設計說明

Keep the CD4024BEX clock trace short and use a clean edge source. The device advances on the falling edge and is specified for a maximum count rate of 24 MHz, so excessive ringing, slow edges, or coupled noise can cause missed or duplicate counts. Route the clock away from reset and output traces, provide a local ground return, and use a buffered signal when driving it from a long cable or remote oscillator.

Account for ripple propagation delay when decoding the parallel outputs or using the terminal count output to trigger a time-sensitive event. The seven cascaded stages do not change state simultaneously, so decoded transitions can be skewed. Add settling time before sampling decoded states, avoid generating critical control edges directly from combinational decode signals, and synchronize asynchronous reset or control events before they reach timing-critical logic.

Operate the CD4024BEX only within its 3 V to 18 V supply range. Place the usual high-frequency bypass capacitor close to the supply and ground pins, with a solid ground plane or low-impedance return path. Because CMOS input transitions can create transient current, hold unused inputs at defined logic levels and avoid allowing clock or reset nets to float. Verify signal thresholds at the actual supply voltage used in the final equipment.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

Compliance attributes are not stated for the exact CD4024BEX ordering code and require confirmation from the manufacturer or an authorized channel.

資料驗證日期: 2026-11-19 — 資料由 XAIPART 元件工程團隊驗證及整理

相關搜尋

cd4024be datasheet CD4024BEX datasheet CD4024BEX pinout CD4024BEX datasheet pdf CD4024BEX 24MHz counter CD4024BEX PDIP-14 CD4024BEX equivalent CD4024BEX replacement CD4024BEX vs HCF4024BEY CD4024BEX price CD4024BEX stock Texas Instruments CD4024BEX

相關元件與詞彙

Texas Instruments CD4024BEX CD4024 CD4000 CMOS logic family HCF4024BEY HEF4024BT CD4024BC binary counter ripple-carry counter seven-stage counter digital logic IC integrated circuit semiconductor falling-edge clock parallel binary output terminal count output 3 V to 18 V supply 24 MHz count rate PDIP-14 through-hole package CMOS event counter frequency divider digital timer industrial automation
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情