CD4516BPW - 4-Bit CMOS Up/Down Counter | Texas Instruments
MPN: CD4516BPW ✗ 停產CD4516BPW 概覽
A binary counter is a sequential digital circuit that stores a multi-bit count and advances that count when triggered by a clock edge. A presettable up/down counter combines this counting function with parallel load inputs, allowing an external controller to establish an initial value. The CD4516BPW belongs to the CMOS logic-counter hierarchy, alongside counters, dividers, timers, and other clock-and-timing integrated circuits.
The principal features of the CD4516BPW are its 4-bit counting capacity, 16-pin surface-mount package, positive-edge triggering, and independent up and down counting functions. Preset capability makes the counter useful when a system must begin from a known value rather than zero. Positive-edge operation also allows designers to define exactly when the state changes, simplifying synchronization with external control logic.
Internally, the device combines flip-flop stages with combinational control logic for clocking, up/down selection, and parallel preset loading. This architecture lets one physical counter support forward counting, reverse counting, and initialization from external logic. The resulting state can be decoded into control or sequencing signals without requiring a separate programmable microcontroller when a fixed digital sequence is sufficient.
Typical applications include industrial sequence controllers, programmable timing references, digital waveform generation, batch-counting systems, test equipment, and embedded control logic. In a programmable timer, a count preset can define the timing interval. In a sequence controller, an up/down counter can index machine steps while an external decoder selects the corresponding action. The compact TSSOP-16 package also makes the device practical for boards with limited floor area.
Designers should treat the clock, preset, carry, and control inputs as a coordinated synchronous interface. Follow the manufacturer datasheet for the complete truth table, input states, timing limits, and unused-pin treatment. Preserve the specified clock transition and establish a defined state before enabling the counter so that the first output transition is predictable.
This page combines the manufacturer function description, package and counter details, sourcing information, drop-in candidate analysis, and practical implementation guidance. It is intended to help engineers identify the correct logic function, verify footprint compatibility, and plan a deterministic counter implementation.
直接替換替代品,適用於 CD4516BPW — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
CD4516BPWR
✅ 直接替換📋 參考替代品(不在目錄中)
CD4516BPWRG4
✅ 直接替換📋 參考替代品(不在目錄中)
CD4516BPWE4
✅ 直接替換📋 參考替代品(不在目錄中)
CD4516BPW 最大額定值與電氣特性
| Counter Type | Presettable binary up/down counter |
| Logic Family | CMOS |
| Number of Count Elements | 1 element |
| Counter Width | 4 bit |
| Clock Edge | Positive edge |
| Counting Direction | Up or down |
| Preset Capability | Yes, presettable |
| 封裝 | 16-lead TSSOP (PW) |
| Package Width | 4.40 mm |
| Package Length | 0.173 in |
| 安裝類型 | Surface mount |
CD4516BPW 0.173 in 腳位配置指南
CD4516BPW(0.173 in 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: CD4516BPW.
請參閱 資料表 以查看完整腳位配置。
典型應用
CD4516BPW 適用於 6 應用s: Industrial Sequence Controller, Programmable Timing Reference, Digital Waveform Generator, Batch and Piece Counter, Test and Measurement Instrument, Embedded Control and Timing.
Industrial Sequence Controller
CD4516BPW fits compact industrial sequence-control logic because it provides a 4-bit binary state, separate up/down counting capability, and positive-edge clock operation. A controller can preset the counter to a defined step, increment it on each qualified machine event, and decode the resulting 4-bit value to select the next operation. Its 16-lead TSSOP package leaves more board area than a larger dual-in-line counter package. The principal design consideration is lifecycle risk: engineers should use the Request a Quote form to determine whether a controlled remaining inventory can support the production plan.
推薦
Programmable Timing Reference
The CD4516BPW can form the counting core of a programmable timer because its preset function establishes an initial count and its positive-edge input advances that count only at a defined clock transition. In a repetitive timing circuit, the clock source defines the time increment while the preset value determines the interval presented to the count-completion logic. Its 4-bit state provides 16 directly decodable positions. Engineers should verify propagation delay, clock limits, and race conditions in the manufacturer’s timing characteristics before using the part in precision timing systems.
推薦
Digital Waveform Generator
CD4516BPW is useful in simple digital waveform and step-sequence generators because its 4-bit count can address a sequence of states while positive-edge clocking creates a repeatable progression. The up/down control adds flexibility for reversing a sequence, and the preset inputs allow restart or repeated runs from a chosen state. In a compact controller, the 16-lead TSSOP footprint supports higher routing density than a 16-lead dual-in-line package. The design should hold preset and count-direction controls in stable states during the active counting edge to avoid unintended count initialization.
推薦
Batch and Piece Counter
CD4516BPW can implement a batch-counting or piece-counting function in small control systems because each positive clock edge advances a 4-bit count and the preset function establishes the target interval. External decode logic can detect a chosen count value or terminal state, while the up/down input permits bidirectional counting where a reverse mechanism is present. The single-element, 4-bit architecture is appropriate when 16 count positions are sufficient. For production use, engineers should confirm available lots, marking, and long-term availability because the device is identified as obsolete.
推薦
Test and Measurement Instrument
CD4516BPW can support step selection, timing windows, and repeatable address sequencing in compact test and measurement equipment. Its 4-bit state maps naturally to instrument control steps, while positive-edge operation makes count advancement predictable relative to a system clock. Preset control can return the instrument to a repeatable starting position between tests. Because the counter is obsolete, instrument designers should confirm that the remaining supply has consistent date codes and that the selected TSSOP-16 variant matches the PCB footprint and assembly requirements.
推薦
Embedded Control and Timing
CD4516BPW is appropriate for small embedded-control subsystems that require autonomous counting without dedicating a microcontroller to the function. The counter can track discrete events, divide a clock by a programmed count, or maintain a machine index, while external logic interprets its 4-bit state. Its 16-lead TSSOP package is suitable for compact surface-mount assemblies and leaves additional routing resources compared with a larger package. The implementation should use defined reset and preset states, synchronize asynchronous control inputs to the clock domain, and verify all operating limits against the manufacturer datasheet.
推薦
推薦產品摘要
工程參考資料,適用於 CD4516BPW — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | CD4516BPWR | CD4516BPWRG4 | CD4516BPWE4 |
|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 16-TSSOP (PW) | 16-TSSOP (PW) | 16-TSSOP (PW) | 16-TSSOP (PW) |
| Counter Width | 4 bit | 4 bit | 4 bit | 4 bit |
| Clock Edge | Positive edge | Positive edge | Positive edge | Positive edge |
| Orderable Suffix | CD4516BPW | R suffix | RG4 suffix | E4 suffix |
主要差異化特點
- Same core counter architecture across the identified ordering options (對比CD4516BPWR)
- Compact 4-bit state storage for fixed control sequences (對比CD4516BPWRG4)
- Positive-edge counting supports deterministic clocked updates (對比CD4516BPWE4)
設計說明
Do not substitute a counter solely because it has 16 pins and a similar binary-count description. The CD4516BPW is a presettable up/down counter, so its parallel-load, count-direction, clock, and carry functions must be compared against the candidate truth table and pin table. In particular, CD4029BPWR appears in comparison listings, but those listings alone do not prove pin-to-pin equivalence. Confirm every connection with the manufacturer datasheet and perform a bench-level state test before production use.
Keep the clock route short and isolate it from nearby switching or high-current signals. The positive-edge counter changes state only on the specified clock transition, but excessive clock-edge coupling can cause false counts. Use a continuous ground reference, place decoupling capacitance close to the supply and ground pins, and route count outputs away from the clock net. The compact 16-lead TSSOP footprint also requires careful assembly planning so adjacent traces and exposed lead clearance remain manufacturable.
Establish deterministic control sequencing whenever the parallel preset or count-direction inputs change. A preset command loads the counter independently of the normal counting path, while the direction input determines the next increment or decrement. Avoid changing these controls at the same instant as an active clock edge unless the timing guarantees in the manufacturer datasheet explicitly permit that transition. Add a defined reset or initialization sequence so the first valid count always begins from a known state.
合規資訊
The available product information identifies the device as a CMOS counter but does not state RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification status.