CD4522BPW - 4-Bit BCD Divide-by-N Counter | Texas Instruments
MPN: CD4522BPW ✓ 啟用中CD4522BPW 概覽
A programmable BCD counter is a digital logic device that counts in binary-coded decimal and divides an input frequency by a selected value from 2 through 10. The CD4522B family belongs to the broader hierarchy of counter logic, sequential logic, logic ICs, and integrated circuits. Its decoded zero output provides a useful indication of the programmed divide-by-N operating cycle, allowing the output to participate in cascaded or synchronized timing systems.
The CD4522BPW provides four counter bits, one programmable counter element, and separate positive-edge and negative-edge counting inputs. The manufacturer describes symmetrical output characteristics and specifies a maximum input current of 1 µA at 18 V over the full package-temperature range, with 100 nA at 18 V and 25°C. These characteristics make the device relevant to low-frequency clock division, timing generation, industrial sequence control, and test-equipment logic.
The CD4522B series meets JEDEC Standard No. 13B, “Standard Specifications for Description of ‘B’ Series CMOS Devices.” Its CMOS implementation supports operation from digital logic systems while providing BCD counting and programmable division in one compact package. The PW option is supplied in a 16-lead thin shrink small-outline package, making it suitable for compact surface-mount assemblies that require programmable rather than fixed division ratios.
Typical uses include dividing a system clock for a display refresh cycle, producing one-shot or periodic timing pulses, sequencing external loads in industrial equipment, and generating a lower-frequency clock for another digital subsystem. The decoded zero output can be used as a load-reset or cycle-completion indication. Designers should account for propagation delay when cascaded counters are used because the division stage and zero-state decode introduce timing between clock edges and decoded outputs.
For a new design, place the CD4522BPW close to the clock source and logic loads to minimize clock routing sensitivity. Use a clean, stable clock signal, provide normal CMOS input levels, and account for unused inputs in the selected implementation. Because the package has 16 leads, PCB layout must follow the official PW package drawing and keep copper and routing consistent with the manufacturer pin configuration.
This product page combines the manufacturer’s device description, package information, JEDEC qualification detail, drop-in candidate information, and engineering guidance into a focused design reference. It also highlights the practical distinction between the standard PW ordering code and package-qualified variants, helping engineers verify footprint, temperature grade, and sourcing requirements before committing a PCB design.
直接替換替代品,適用於 CD4522BPW — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
CD4522BPWRE4
✅ 直接替換📋 參考替代品(不在目錄中)
CD4522BPWG4
✅ 直接替換📋 參考替代品(不在目錄中)
CD4522BPWRG4
✅ 直接替換📋 參考替代品(不在目錄中)
CD4522BPW 最大額定值與電氣特性
| Counter Type | Programmable BCD divide-by-N counter |
| Number of Counter Elements | 1 element |
| Counter Width | 4 bits |
| Counting Direction | Positive or negative |
| Counting Inputs | Positive-edge and negative-edge inputs |
| Zero-State Output | Decoded output |
| Logic Technology | CMOS |
| Maximum Input Current | 1 µA at 18 V over full package-temperature range |
| Typical Input Current | 100 nA at 18 V and 25°C |
| 工作溫度 | -55°C to +125°C |
| 封裝 | 16-pin TSSOP (PW) |
| 安裝類型 | Surface mount |
| Output Characteristics | Standard symmetrical output characteristics |
| JEDEC Qualification | JEDEC Standard No. 13B |
CD4522BPW 16-pin tssop (pw) 腳位配置指南
CD4522BPW(16-pin tssop (pw) 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: CD4522BPW.
請參閱 資料表 以查看完整腳位配置。
典型應用
CD4522BPW 適用於 6 應用s: Programmable Clock Divider, Industrial Timing Sequence Controller, Display Refresh Rate Generator, Pulse and Frequency Divider, Test and Measurement Timing, Low-Power CMOS Control Logic.
Programmable Clock Divider
The CD4522BPW is suitable for dividing a system clock by a selected BCD count when a fixed-divider IC would require a different part for each timing ratio. Its one 4-bit counter element, positive counting input, and decoded zero output provide a compact divide-by-N implementation in a 16-pin TSSOP package. The decoded output can mark the end of each divided cycle for a timing-reference or periodic-load circuit. Designers should preserve clock-edge margin around the counter and decode delays so that downstream reset or latch timing remains deterministic.
推薦
Industrial Timing Sequence Controller
The CD4522BPW can divide an industrial timing pulse and use its decoded zero-state output to coordinate a machine sequence or repetitive actuator update. Its extended -55°C to +125°C package-temperature range and JEDEC Standard No. 13B B-series CMOS basis fit industrial logic environments. Positive and negative count inputs also allow the device to work with different edge-oriented timing conventions. The implementation should define safe outputs during power-up and account for propagation delay between the terminal count and decoded zero transition.
推薦
Display Refresh Rate Generator
A programmable BCD counter is useful when a display or multiplexed indicator group needs a selectable refresh interval derived from a faster system clock. CD4522BPW provides a 4-bit count element and a decoded zero output that can trigger a refresh-enable pulse after the programmed division interval. The TSSOP-16 package supports compact controller boards without introducing a large discrete counter footprint. Engineers should choose the division ratio to keep refresh timing within the display’s requirements and verify recovery time for the decoded output.
推薦
Pulse and Frequency Divider
The CD4522BPW can divide a repetitive input frequency by a programmable BCD value when one pulse must be emitted after a fixed number of input events. Its symmetric output characteristics and selectable positive or negative count inputs allow integration with either edge-oriented clock source, subject to the timing limits in the datasheet. The resulting output preserves the period relationship of the input while reducing repetition frequency. Use the decoded zero output for pulse synchronization rather than relying on every intermediate counter transition.
推薦
Test and Measurement Timing
CD4522BPW can establish lower-rate timing from a laboratory or embedded test clock, providing a programmable division ratio and a cycle-complete indication for triggering measurement sequences. The 4-bit BCD counter supports divide ratios commonly used to create control strobes without adding a microcontroller output pin. Its decoded zero output provides a convenient event boundary for arming a capture or sequencing an instrument. For precise instruments, include the counter and decode propagation delays in the overall measurement timing budget.
推薦
Low-Power CMOS Control Logic
The CD4522BPW is appropriate for compact CMOS control logic requiring BCD counting with low input leakage. Texas Instruments specifies a maximum input current of 1 µA at 18 V over the full package-temperature range and 100 nA at 18 V and 25°C. These characteristics help limit disturbance from high-impedance control nodes while the device supplies a decoded terminal-count signal. The circuit must still maintain valid logic levels and appropriate transitions at every connected input according to the family electrical specifications.
推薦
推薦產品摘要
工程參考資料,適用於 CD4522BPW — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | CD4522BPWRE4 | CD4522BPWG4 | CD4522BPWRG4 |
|---|---|---|---|---|
| Package | 16-TSSOP (PW) | 16-TSSOP (PW) | 16-TSSOP (PW) | 16-TSSOP (PW) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Counter Type | Programmable BCD divide-by-N counter | Programmable BCD divide-by-N counter | Programmable BCD divide-by-N counter | Programmable BCD divide-by-N counter |
| Counter Width | 4 bits | 4 bits | 4 bits | 4 bits |
| Number of Counter Elements | 1 element | 1 element | 1 element | 1 element |
| Counting Inputs | Positive and negative | Positive and negative | Positive and negative | Positive and negative |
| Zero-State Output | Decoded output | Decoded output | Decoded output | Decoded output |
| Logic Technology | CMOS | CMOS | CMOS | CMOS |
| JEDEC Qualification | JEDEC Standard No. 13B | CD4522B family; JEDEC Standard No. 13B | CD4522B family; JEDEC Standard No. 13B | CD4522B family; JEDEC Standard No. 13B |
主要差異化特點
- Programmable BCD division in a compact surface-mount package (對比CD4522BPWRE4)
- Decoded zero-state output for cycle synchronization (對比CD4522BPWG4)
- Positive and negative counting inputs (對比CD4522BPWRG4)
設計說明
Do not treat CD4522B package suffixes as functionally different counters without checking the ordering information. CD4522BPW, CD4522BPWRE4, CD4522BPWG4, and CD4522BPWRG4 share the 16-pin TSSOP arrangement, but their production or qualification attributes may differ. Verify the exact ordering code, temperature grade, date-code policy, and approved-package list before releasing a production BOM.
Keep the counter clock route short and away from noisy switching nodes. A divide-by-N counter produces an output transition only after multiple input edges, so clock jitter and edge distortion can accumulate across the programmed counting interval. Use a clean clock source, provide a defined edge transition, and check the zero-output delay against any downstream setup or reset requirement.
Place the CD4522BPW near the clock source and the logic driven by its decoded outputs. Follow the official 16-lead PW package drawing for pin numbering, lead width, and solder-pad geometry. Keep the TSSOP footprint free from accidental bridges, especially between adjacent clock and control pins, and maintain a continuous ground return around high-impedance counter inputs.
Design the counter from the same CMOS supply rail used by compatible logic and maintain input levels within the CD4522B family limits. The specified maximum input current is 1 µA at 18 V over the full package-temperature range, with 100 nA at 18 V and 25°C. Use that figure to assess leakage into connected nodes, but do not use it as a substitute for the complete input and output electrical characteristics.
合規資訊
The CD4522B family meets JEDEC Standard No. 13B. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not identified and remain unknown.