CS4346-CZZ 24-Bit 192kHz Stereo Audio DAC | Cirrus Logic
MPN: CS4346-CZZ ✗ 停產CS4346-CZZ 概覽
An audio DAC is a data-conversion IC that converts digital audio samples into analog voltage signals suitable for amplification and loudspeaker drive. The CS4346-CZZ belongs to the CS4344 family of complete stereo DAC output systems, integrating digital interpolation, multi-bit delta-sigma conversion, and output analog filtering in one compact package. This combination simplifies audio playback designs compared with discrete converter and filter assemblies.
Key features include 24-bit resolution, a maximum sampling rate of 192 kHz, stereo output, and support for right-justified digital audio data. According to the manufacturer datasheet, the device accepts a single supply voltage of 3 V to 3.47 V or 5 V. Its operating temperature range is -10°C to +70°C, and the surface-mount package is suitable for compact consumer and multimedia equipment.
The CS4346 uses a multi-bit delta-sigma modulator to translate the incoming PCM stream into a high-resolution analog output. A right-justified interface supports direct connection to suitable digital audio sources, while integrated interpolation and analog filtering reduce the number of external signal-chain stages. Designers should nevertheless verify interface timing, clocking, de-emphasis, and digital-filter requirements against the specific system configuration before release.
Typical uses include CD and DVD audio players, digital music systems, home-theater equipment, active speakers, automotive audio electronics, and industrial audio-control panels. The device is especially appropriate when a design needs stereo conversion above 96 kHz or requires 24-bit source data without using a larger multi-channel audio codec.
Power-layout planning is essential because digital and analog return currents share a small package. Place the decoupling and audio-path components according to the manufacturer reference layout, keep the analog output route away from switching nodes, and verify that the selected output network is compatible with the intended line or headphone drive stage.
This page combines the technical characteristics of the CS4346-CZZ with practical replacement guidance, application-oriented circuit guidance, and a parameter comparison for engineers evaluating obsolete or hard-to-source stereo DAC implementations.
直接替換替代品,適用於 CS4346-CZZ — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: CS4346-CZZ (相同外形與佔位) — 差異在於 Maximum Sampling Rate, Package.
CS4344-CZZ
✅ 直接替換聯絡詢價
查看資料表 →CS4345-CZZ
✅ 直接替換聯絡詢價
查看資料表 →CS4348-CZZ
✅ 直接替換📋 參考替代品(不在目錄中)
CS4346-CZZ 最大額定值與電氣特性
| Converter Type | Stereo audio digital-to-analog converter |
| 解析度 | 24 bit |
| Maximum Sampling Rate | 192 kHz |
| Number of Channels | 2 channels |
| Conversion Architecture | Multi-bit delta-sigma |
| Digital Audio Interface | SPI |
| Input Data Format | Right-justified |
| 供應電壓 | 3 V to 3.47 V or 5 V |
| Supply Configuration | Single supply |
| 工作溫度 | -10°C to +70°C |
| 封裝 | 10-pin TSSOP, 3.00 mm width |
| 安裝類型 | Surface mount |
| Integrated Functions | Interpolation, multi-bit D/A conversion, and output analog filtering |
| Part Status | Obsolete |
CS4346-CZZ 10-pin tssop, 3.00 mm width 腳位配置指南
CS4346-CZZ(10-pin tssop, 3.00 mm width 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: CS4346-CZZ.
請參閱 資料表 以查看完整腳位配置。
典型應用
CS4346-CZZ 適用於 6 應用s: High-Resolution CD Player, Home Theater Audio Receiver, Digital Music Player, Active Speaker USB Interface, Automotive Audio Head Unit, Industrial Audio Control Panel.
High-Resolution CD Player
The CS4346-CZZ fits a high-resolution CD-player output stage because it combines 24-bit resolution, operation up to 192 kHz, and integrated analog filtering in a 10-pin TSSOP. It can follow an I2S-to-serial conversion stage when the required source format is right-justified, with the clock and serial-data lines routed according to the manufacturer timing requirements. Using the integrated interpolation and output filter reduces the number of separate audio-processing stages. The design should still preserve a quiet analog ground path, place the bypass capacitor close to the supply pin, and avoid routing digital clock signals beneath the analog outputs.
推薦
Home Theater Audio Receiver
The CS4346-CZZ is appropriate for a compact home-theater playback channel that converts digital audio at 24-bit resolution and up to 192 kHz. Its two-channel output architecture supports stereo decoding or a dedicated analog monitoring path, while the single 3 V to 3.47 V or 5 V supply simplifies system rail planning. The integrated analog filter makes the converter suitable for feeding a line-level amplifier, provided the output network and downstream gain stage match the intended impedance. Board layout should isolate the SPI clock from the stereo outputs and provide a continuous return path beneath the analog section.
推薦
Digital Music Player
The CS4346-CZZ can serve as the final stereo conversion stage in a portable digital-music player that accepts digital samples from a decoder and drives an analog headphone or line-output stage. Its 24-bit resolution preserves high-resolution source information, while the 192 kHz capability covers high-rate streams when the upstream decoder and clock system support them. The 10-pin TSSOP footprint helps maintain a compact board layout, but thermal and grounding discipline remain important in small enclosures. Keep the DAC’s analog return isolated from digital and switching-current paths, and verify the analog output swing before selecting the following amplifier stage.
推薦
Active Speaker USB Interface
The CS4346-CZZ is suitable for an active-speaker interface that receives digital audio from USB or network audio and produces a stereo analog signal for a power amplifier. Supporting 24-bit data at up to 192 kHz makes it useful for high-resolution streaming sources, while its integrated filtering reduces the external analog reconstruction complexity. The system must still translate USB audio into a format and clock arrangement accepted by the CS4346-CZZ. Use a quiet local supply, minimize analog trace length, and place the digital interface return away from the output pins to reduce noise coupling in the enclosure.
推薦
Automotive Audio Head Unit
The CS4346-CZZ can support a stereo playback path in an automotive audio head unit when the operating environment remains within its listed -10°C to +70°C range. The 24-bit, 192 kHz converter is appropriate for high-resolution digital sources, and the 10-pin TSSOP package supports compact PCB layouts. Automotive qualification must be confirmed separately before production release because the CS4346-CZZ is obsolete and its AEC-Q100 status is not established by the available product information. The layout should withstand vehicle power-supply transients, isolate the analog output from chassis-related switching noise, and include appropriate protection at the board boundary.
推薦
Industrial Audio Control Panel
The CS4346-CZZ can provide the stereo playback output for an industrial control panel, announcement console, or monitoring unit that accepts digital audio from a communications or control subsystem. Its two-channel output simplifies balanced or unbalanced playback-channel construction, while the 24-bit resolution and 192 kHz rate support high-fidelity source material. The listed operating range of -10°C to +70°C suits controlled indoor equipment but may be insufficient for harsher industrial installations. Confirm clock stability, digital-filter configuration, grounding strategy, and electromagnetic compatibility at the enclosure level, keeping the sensitive analog output away from relay, motor, and power-converter switching nodes.
推薦
推薦產品摘要
工程參考資料,適用於 CS4346-CZZ — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | CS4344-CZZ | CS4345-CZZ | CS4348-CZZ |
|---|---|---|---|---|
| Brand | Cirrus Logic | Cirrus Logic | Cirrus Logic | Cirrus Logic |
| Package | 10-pin TSSOP | 10-pin TSSOP | 10-pin TSSOP | 10-pin TSSOP |
主要差異化特點
- Exact CS4346 family target for existing CS4346-CZZ designs (對比CS4348-CZZ)
- Documented equivalent-family substitution path (對比CS4344-CZZ)
- High-rate single-supply stereo conversion (對比CS4345-CZZ)
設計說明
Separate the digital audio interface from the analog output routing. Keep the SPI clock and serial-data traces away from the left and right analog outputs, avoid routing clock signals beneath the converter, and provide a low-impedance analog return path. Place the supply bypass capacitor directly beside the relevant supply pin and follow the manufacturer reference layout for component placement and exposed return connections.
Confirm the master clock, serial-data, and frame-clock timing for the selected audio format before releasing the PCB. The CS4346-CZZ supports a right-justified data arrangement, and changing the input mode can affect required clock ratios and valid-data boundaries. Use the manufacturer interface timing diagrams to set signal levels, account for propagation delay, and test startup behavior with the real source device rather than relying on nominal bit-rate calculations alone.
Do not treat every member of the CS4344 family as an automatic substitute. The CS4344-CZZ and CS4345-CZZ share the documented 24-bit, 192 kHz stereo positioning, but supported digital modes, filters, de-emphasis, clocking, and analog behavior still require verification. Complete a pin-by-pin comparison and test the replacement on hardware before approving it for production. Also confirm that the device is an exact 10-pin TSSOP rather than a related package variant.
Design the converter’s supply path for both 3.3 V and 5 V operation only after confirming the voltage option selected for the exact orderable device and system. Keep the DAC close to its decoupling network, use a low-resistance supply plane, and separate converter return current from noisy amplifier or switching-converter currents. Verify analog output behavior under both light and heavy digital-clock activity because clock transitions can couple into the output through imperfect grounding or shared supply impedance.
合規資訊
The CS4346-CZZ is listed as obsolete. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer or lot documentation; AEC-Q100 qualification is not established for this exact device.