CS5344-DZZ - 24-Bit 96kHz Stereo Audio ADC | Cirrus Logic
MPN: CS5344-DZZ ✗ 停產CS5344-DZZ 概覽
An audio ADC is a mixed-signal integrated circuit that samples left and right analog audio inputs and converts each channel into a high-resolution digital representation. Within the broader semiconductor hierarchy, the CS5344 belongs to the ADC/DAC class of data-acquisition and interface ICs. It integrates sampling, analog-to-digital conversion, and anti-alias filtering into one device, reducing the number of separate components required in a digital audio signal chain.
The CS5343 and CS5344 family provides 24-bit conversion results for both stereo inputs while operating at sample rates up to 108 kHz per channel. Key performance characteristics include 98 dB dynamic range, -92 dB total harmonic distortion plus noise, and a 96 kHz headline conversion rate for the CS5344-DZZ ordering code. These characteristics suit consumer and professional audio equipment where accurate reconstruction of small signals and low conversion distortion are important.
The serial output architecture converts each channel into a compact digital stream for transmission to an audio processor, digital audio interface, or codec. The distinction between CS5343 and CS5344 is the supported serial audio format: CS5343 supports I2S, whereas CS5344 supports left-justified serial audio. The CS5344-DZZ also operates from a 3.1 V to 5.25 V supply range, allowing use in both lower-voltage portable systems and conventional 5 V audio equipment.
Typical applications include stereo audio capture, digital mixing consoles, audio interface hardware, consumer playback equipment, and instrumentation requiring simultaneous left- and right-channel conversion. The dual-channel architecture is particularly useful when the system must preserve channel timing between the analog inputs and the resulting serial data streams.
Designers should treat analog, digital, and clock-supply connections as separate high-impedance and high-current paths. The analog input reference network, grounding, and layout of the serial clock and data lines can materially affect channel matching and noise performance. Use the pin-description table and application circuit in the manufacturer datasheet when assigning pins and selecting external components.
This page combines the documented CS5344 conversion characteristics with verified ordering information, a discontinued-lifecycle assessment, and design guidance focused on analog grounding, clock routing, supply decoupling, and the I2S-versus-left-justified interface distinction.
直接替換替代品,適用於 CS5344-DZZ — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
CS5344-DZZR
✅ 直接替換📋 參考替代品(不在目錄中)
CS5344-CZZR
✅ 直接替換📋 參考替代品(不在目錄中)
CS5344-DZZ 最大額定值與電氣特性
| ADC Type | Dual Delta-Sigma Audio ADC |
| Channel Count | 2 channels |
| 解析度 | 24 bit |
| Maximum Sample Rate | 108 kHz per channel |
| Headline Sample Rate | 96 kHz |
| Dynamic Range | 98 dB |
| THD+N | -92 dB |
| Output Interface | Serial, left-justified |
| Supported Audio Data Format | Left-justified serial audio |
| Supply Voltage Range | 3.1 V to 5.25 V |
| 封裝 | 10-pin TSSOP |
| 安裝類型 | Surface mount |
| Datasheet Length | 22 pages |
| 生命週期狀態 | Discontinued |
| RoHS 狀態 | Compliant |
CS5344-DZZ 10-pin tssop 腳位配置指南
CS5344-DZZ(10-pin tssop 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: CS5344-DZZ.
請參閱 資料表 以查看完整腳位配置。
典型應用
CS5344-DZZ 適用於 6 應用s: Stereo Audio Capture, Digital Mixing Console, Professional Audio Interface, Consumer Playback Equipment, Audio Test and Measurement, Digital Audio Processing Module.
Stereo Audio Capture
The CS5344-DZZ fits stereo recording front ends because it converts two analog channels into 24-bit digital data while preserving 98 dB dynamic range and -92 dB THD+N. Both inputs can operate at rates up to 108 kHz per channel, allowing the capture system to support higher-resolution audio. The converter performs sampling, conversion, and anti-alias filtering in one 10-pin TSSOP device, reducing external analog conversion stages. Its left-justified serial output must match the receiving DSP or digital audio interface, and clock and ground layout should follow the manufacturer reference design.
Digital Mixing Console
A digital mixing console can use the CS5344-DZZ to capture left- and right-channel analog program material as synchronized 24-bit streams. The dual-channel architecture supports equal timing between channels, while 98 dB dynamic range provides useful headroom for low-level microphone and instrument inputs. Sampling rates up to 108 kHz per channel offer flexibility for high-resolution mixing workflows. Because the interface is left-justified rather than I2S, the console architecture must include suitable data framing and clock routing, with separate analog and digital return paths to limit converter noise.
Professional Audio Interface
The CS5344-DZZ is appropriate for a two-channel professional audio interface requiring simultaneous stereo conversion and a compact surface-mount footprint. Its 24-bit conversion resolution, 98 dB dynamic range, and -92 dB THD+N suit line-level capture, while the 3.1 V to 5.25 V range supports multiple host-rail arrangements. The converter can feed a DSP through its left-justified serial interface. Designers should account for the required master and serial clocks, isolate analog input routing from digital return currents, and verify downstream framing before finalizing the interface PCB.
Consumer Playback Equipment
The CS5344-DZZ can be used in consumer playback and monitoring equipment that accepts analog stereo sources and requires digital conversion for processing or transmission. Its dual-channel design handles left and right signals together, while the 10-pin TSSOP package supports compact board layouts. The 24-bit data width and sample rates up to 108 kHz per channel provide flexibility across conventional and high-resolution audio formats. The converter's obsolete lifecycle status should be addressed for new consumer-product programs, and its left-justified output should be confirmed against the selected digital signal processor.
Audio Test and Measurement
Instrumentation can employ the CS5344-DZZ when a compact stereo front end is needed ahead of analysis, storage, or a digital signal processor. The 98 dB dynamic range and -92 dB THD+N establish useful conversion performance for measuring audio signals, while the 3.1 V to 5.25 V supply range supports compact laboratory equipment. Two channels are converted with a common device architecture, helping preserve left-right relationships. For accurate measurements, the reference voltage, analog input network, clock jitter, and grounding must be controlled according to the datasheet rather than selected solely from nominal ADC resolution.
Digital Audio Processing Module
The CS5344-DZZ is suitable for a digital audio processing module that converts analog inputs before applying mixing, filtering, or level analysis. Serial output at up to 108 kHz per channel provides a direct path to an audio DSP, while 24-bit data preserves substantial numerical resolution for downstream operations. The left-justified format must be supported by the processor or adapted through interface logic. Placement near the analog connectors, short serial traces, clean reference grounding, and separate supply decoupling are important because the converter must preserve its specified 98 dB dynamic range in the complete signal chain.
工程參考資料,適用於 CS5344-DZZ — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | CS5344-DZZR | CS5344-CZZR |
|---|---|---|---|
| Package | 10-TSSOP | 10-TSSOP | 10-TSSOP |
| Brand | Cirrus Logic | Cirrus Logic | Cirrus Logic |
| ADC Resolution | 24 bit | 24 bit | 24 bit |
| Channel Count | 2 channels | 2 channels | 2 channels |
| Serial Audio Format | Left-justified | Left-justified | Left-justified |
主要差異化特點
- Retains the left-justified interface rather than the CS5343 I2S format (對比CS5343)
- Matches the CS5344-DZZR ordering family (對比CS5344-DZZR)
- Provides a documented 98 dB dynamic range and -92 dB THD+N performance target (對比CS5344-CZZR)
設計說明
Place the analog input components and the converter as close together as practical, and route analog inputs away from the master-clock, serial-clock, serial-data, and switching-supply paths. Keep the analog reference return short and use the manufacturer pin table to identify analog and digital ground pins correctly. A split-plane strategy may be appropriate, but the grounding arrangement should be checked against the CS5343/4 reference design rather than copied between unrelated converters.
Route the master clock and serial clock on compact, controlled-impedance traces and keep them away from the analog inputs. The left-justified data format places the most significant data near the audio frame boundary, so setup and hold timing at the receiving device must be reviewed. Confirm clock frequency, polarity, and data alignment against the timing diagrams before releasing the layout; changing the CS5343 I2S format to CS5344 left-justified is not a software-only substitution.
Follow the CS5343/4 application circuit for analog and digital supply decoupling, including the component types and placement shown by the manufacturer. Decoupling capacitors should be positioned at their associated supply pins to minimize loop area and high-frequency supply noise. The documented 3.1 V to 5.25 V operating range is necessary but does not replace stable rail design, especially when the converter operates beside a switching regulator or high-current digital output.
合規資訊
The CS5344-DZZ listing identifies RoHS compliance. The Cirrus Logic product page identifies the CS5343/4 family as discontinued. No definitive REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals conclusion was identified.