CS5364-DQZ - 4-Channel 24-Bit 192kHz Audio ADC | Cirrus Logic
MPN: CS5364-DQZ ✗ 停產CS5364-DQZ 概覽
An audio ADC converts continuous analog voltage signals into discrete digital words for processing, storage, or transmission. The CS5364 belongs to the ADC hierarchy within data-conversion integrated circuits, combining four simultaneous audio channels with configurable digital audio interfaces. Its architecture is designed for transparent conversion, wide dynamic range, and negligible distortion in high-end audio equipment.
The converter uses a fifth-order, multi-bit delta-sigma modulator followed by low-latency digital filtering. It generates 24-bit output values and supports audio sample rates through 216 kHz per channel. Selectable digital interface formats, including I2C and SPI as identified for the CS5364-DQZ, allow the converter to connect with digital audio processors, interface controllers, and digital signal processing equipment.
Audio performance is characterized by 114 dB dynamic range and -105 dB total harmonic distortion plus noise. These figures make the CS5364 appropriate for multichannel recording systems, digital mixing consoles, outboard converters, effect processors, surround-sound equipment, and automotive audio systems. The four-channel architecture reduces the number of separate converter packages required for a typical multichannel signal chain.
Typical implementations place four balanced or unbalanced analog audio inputs into the converter, connect the digital outputs to an audio processor, and use the supported interface mode to transfer 24-bit samples. Designers must observe the pin-specific analog, digital, and supply connections in the manufacturer pin-description table. Clocking, interface mode, grounding, and input-reference selection should be established before analog routing is finalized.
For low-noise operation, maintain a quiet analog ground and a clean return path around the input circuitry, follow the recommended decoupling connections, and route digital clock and interface traces away from sensitive analog inputs. Because the converter combines a large exposed package area with mixed-signal connections, stable supply distribution and careful return-current control are essential for preserving the converter's specified noise performance.
This product data combines the CS5364 architecture and electrical characteristics with package, sourcing, lifecycle, replacement, and application guidance. It also highlights verified drop-in candidates and separates directly interchangeable options from parts that require a different channel count, package, interface, or board redesign.
直接替換替代品,適用於 CS5364-DQZ — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
CS5364-CQZR
✅ 直接替換📋 參考替代品(不在目錄中)
CS5364-CQZ
✅ 直接替換📋 參考替代品(不在目錄中)
CS5364-DQZ 最大額定值與電氣特性
| Number of Channels | 4 channels |
| 解析度 | 24 bits |
| Maximum Sample Rate | 216 kHz per channel |
| Nominal Sampling Rate | 192 kHz |
| Dynamic Range | 114 dB |
| THD+N | -105 dB |
| Converter Architecture | Fifth-order multi-bit delta-sigma |
| Digital Filter | Low-latency digital filtering |
| Analog Input Function | Sampling, analog-to-digital conversion, and anti-alias filtering |
| Digital Interface | I2C and SPI |
| Logic Supply | 5 V |
| 封裝 | 48-LQFP, 7 mm x 7 mm |
| 安裝類型 | Surface mount |
| 腳位數 | 48 pins |
CS5364-DQZ 48-lqfp, 7 mm x 7 mm 腳位配置指南
CS5364-DQZ(48-lqfp, 7 mm x 7 mm 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: CS5364-DQZ.
請參閱 資料表 以查看完整腳位配置。
典型應用
CS5364-DQZ 適用於 6 應用s: Professional Digital Mixing Console, Multichannel Audio Recorder, Outboard Digital Audio Converter, Digital Effect Processor, Surround-Sound Audio Receiver, Automotive Audio System.
Professional Digital Mixing Console
The CS5364-DQZ is suited to multichannel mixers because it converts four audio channels with 24-bit resolution while supporting sample rates through 216 kHz per channel. Its 114 dB dynamic range and -105 dB THD+N provide headroom for professional capture and mixing paths. The four-channel architecture reduces converter count while the configurable interface connects to a digital audio processor. Layout should preserve short analog paths, continuous grounds, and separation from clock and data traces.
Multichannel Audio Recorder
A multichannel recorder can use the CS5364-DQZ to convert four incoming audio channels before storage or processing. The fifth-order multi-bit delta-sigma architecture and low-latency digital filtering support transparent conversion, while 24-bit data and 216 kHz per-channel operation suit high-resolution recording. Use the manufacturer's input and reference configuration, maintain a quiet analog return path, and synchronize the converter clock to the recording system to avoid timing errors.
Outboard Digital Audio Converter
The CS5364-DQZ fits an outboard converter that needs four simultaneous audio inputs, high-resolution capture, and low distortion. Its 114 dB dynamic range supports professional monitoring and capture applications, while selectable digital interfaces permit connection to an external processor. Keep input conditioning close to the converter, provide the recommended bypassing, and isolate high-current digital return paths from the analog reference and input network.
Digital Effect Processor
The CS5364-DQZ can serve as the analog front end of a digital effect processor requiring multiple high-quality audio inputs. Its four-channel architecture provides synchronized conversion, and the low-latency digital filtering is appropriate for signal-processing chains. The 24-bit word length and sample-rate support through 216 kHz provide adequate conversion resolution, while proper clock routing and grounding are essential for stable, artifact-free processing.
Surround-Sound Audio Receiver
The CS5364-DQZ is applicable to surround-sound receivers where several audio channels must be converted before decoding or processing. Its four-channel 24-bit architecture, 114 dB dynamic range, and -105 dB THD+N align with high-end consumer and professional audio requirements. The 48-LQFP package supports compact converter placement, but the design must provide clean analog grounding and route processor clocks and data away from the audio inputs.
Automotive Audio System
The CS5364-DQZ can serve as a four-channel converter in an automotive audio system, where multiple inputs are converted into a digital stream for processing and amplification control. Its 24-bit resolution, wide dynamic range, and low distortion suit audio capture in the application environment identified by the manufacturer. Before production use, confirm the ordered variant's temperature range, automotive qualification, supply constraints, and expected lifecycle because the converter family is discontinued.
工程參考資料,適用於 CS5364-DQZ — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | CS5364-CQZR | CS5364-CQZ |
|---|---|---|---|
| Brand | Cirrus Logic | Cirrus Logic | Cirrus Logic |
| Package | 48-LQFP (7x7) | 48-LQFP (7x7) | 48-LQFP (7x7) |
| Number of Channels | 4 channels | 4 channels | 4 channels |
| Resolution | 24 bits | 24 bits | 24 bits |
| Dynamic Range | 114 dB | 114 dB | 114 dB |
| THD+N | -105 dB | -105 dB | -105 dB |
| Digital Interface | I2C and SPI | Selectable audio interface formats | Selectable audio interface formats |
| Converter Architecture | Fifth-order multi-bit delta-sigma | Fifth-order multi-bit delta-sigma | Fifth-order multi-bit delta-sigma |
| Lifecycle Status | Discontinued | Discontinued | Discontinued |
主要差異化特點
- Four-channel conversion in one 48-LQFP device (對比CS5364-CQZ)
- Verified pinout and electrical equivalence (對比CS5364-CQZR)
- High-resolution performance for professional audio (對比CS5364-CQZ)
設計說明
Route the four analog inputs directly to their assigned converter pins and keep input-conditioning components close to the device. Maintain a continuous analog ground region, connect digital return currents away from the analog input reference, and separate clocks and serial data from sensitive audio paths. Follow the pin-description table and recommended layout in the Cirrus Logic CS5364 datasheet when assigning tracks and ground connections.
Use short, properly terminated clock and digital-interface routes, with the converter and processor sharing a stable clock relationship. Confirm the selected interface mode, clock polarity, data timing, and master or slave configuration before PCB release. Because the converter uses low-latency digital filtering, correct clocking is essential for avoiding timing-dependent artifacts or channel misalignment.
Apply the manufacturer-recommended supply bypassing directly at the appropriate analog and 5 V logic supply pins. Keep the supply and ground planes continuous under the device, use low-inductance interconnects, and avoid routing switching-node returns through the analog input area. Verify the actual analog supply range, absolute maximum ratings, and power-consumption limits in the manufacturer datasheet before selecting external regulators.
Do not treat CS5366 or CS5368 family members as automatic substitutes because their channel counts, interfaces, packages, and pin assignments may differ. Likewise, do not assume that every ordering suffix has identical packing or availability. Confirm the full ordering code, package drawing, temperature grade, pinout, and lifecycle status. For an existing PCB, CS5364-CQZR is the verified close candidate because its family comparison reports the same pinout and electrical specifications.
合規資訊
No definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was found for the exact CS5364-DQZ ordering code. The manufacturer identifies automotive audio systems as an application, but this alone does not establish AEC-Q100 qualification.