CS5381-KZZ - 24-Bit 192kHz Stereo Audio ADC | Cirrus Logic
MPN: CS5381-KZZ ✓ 啟用中CS5381-KZZ 概覽
An audio ADC is a mixed-signal data-acquisition IC that converts left and right analog audio signals into high-resolution digital samples. It belongs to the ADC hierarchy, combines an analog-to-digital converter with digital filtering, and ultimately supports digital audio processing, recording, transmission, and playback systems. The CS5381 is designed specifically for professional audio and digital audio equipment requiring high-resolution stereo conversion.
Key features include 24-bit resolution, two analog input channels, a 120 dB signal-to-noise ratio, operation from a 4.75 V to 5.25 V supply, and a 192 kHz maximum sample rate for the specified device. The converter uses an advanced multi-bit delta-sigma architecture rather than a single-bit modulator, which supports a practical combination of resolution, dynamic range, and conversion speed.
The CS5381 includes analog anti-alias filtering and digital filtering as part of the conversion signal path. Its serial digital interface supports audio data transfer to a digital signal processor, audio codec, sample-rate converter, or other digital audio device. The manufacturer reference design pairs the CS5381 with the Cirrus Logic CS8421 asynchronous sample-rate converter to create a jitter-immune conversion platform with dual stereo or four-channel TDM output capability.
Typical uses include professional digital audio consoles, multichannel recording equipment, high-resolution audio interfaces, digital mixers, broadcast equipment, and asynchronous sample-rate conversion systems. The 24-pin TSSOP package also makes the converter practical for compact audio boards where analog and digital routing must be balanced carefully.
When laying out a CS5381 design, treat the analog inputs and digital audio outputs as separate high-performance signal paths. Use the pin-description and application-circuit information in the manufacturer datasheet for component values, interface mode selection, grounding, and decoupling. Provide a clean analog supply and route serial audio clocks and data away from sensitive analog input traces to reduce crosstalk and clock-related noise.
This product page combines the manufacturer specifications, verified package information, practical interface guidance, and a traceable comparison with the closest identified same-family converter. It helps engineers evaluate whether the CS5381's 24-bit stereo architecture, 192 kHz operation, and TSSOP-24 footprint fit a specific digital-audio design.
直接替換替代品,適用於 CS5381-KZZ — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
CS5381K-KZZ
✅ 直接替換📋 參考替代品(不在目錄中)
CS5381-KZZ 最大額定值與電氣特性
| Converter Type | 24-bit stereo delta-sigma audio ADC |
| 解析度 | 24 bit |
| Number of Input Channels | 2 channels |
| Number of A/D Converters | 2 converters |
| Maximum Sample Rate | 192 kHz per channel |
| Signal-to-Noise Ratio | 120 dB |
| Analog Supply Voltage Range | 4.75 V to 5.25 V |
| Digital Interface | Serial I2S/LJ audio interface |
| Modulator Architecture | 5th-order multi-bit delta-sigma |
| Anti-Alias Filtering | Integrated analog and digital filtering |
| Output Format | 24-bit serial digital audio data |
| 封裝 | 24-pin TSSOP |
| 腳位數 | 24 pins |
| 安裝類型 | Surface Mount |
| Temperature Grade | Commercial grade |
| RoHS 狀態 | Compliant |
| Lead-Free Status | Lead Free |
CS5381-KZZ 24-pin tssop 腳位配置指南
CS5381-KZZ(24-pin tssop 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: CS5381-KZZ.
請參閱 資料表 以查看完整腳位配置。
典型應用
CS5381-KZZ 適用於 6 應用s: Professional Stereo Audio Interface, Digital Audio Mixer, Multichannel Recording System, Asynchronous Audio Conversion, Digital Broadcast Processing, High-Resolution Music Capture.
Professional Stereo Audio Interface
The CS5381-KZZ is well suited to a professional stereo audio interface because it combines two analog inputs with 24-bit conversion, a stated 120 dB signal-to-noise ratio, and operation up to 192 kHz per channel. Place the converter close to the input connectors and preserve a controlled return path for each channel. The serial output can feed a DSP or audio codec, while integrated analog and digital filtering reduces the amount of external signal conditioning. The principal design concern is keeping the 4.75 V to 5.25 V analog supply clean and separating the low-level input traces from serial clock and data lines.
推薦
Digital Audio Mixer
In a digital mixer, the CS5381-KZZ can convert left and right analog input busses into high-resolution digital streams before routing and processing. Its 192 kHz per-channel maximum supports high-rate mixing workflows, while the 24-bit output format preserves substantial headroom for gain staging and downstream processing. The converter should be surrounded by low-impedance analog paths, local supply bypassing, and short digital traces. Serial audio clocks require particularly careful routing because switching activity near the analog inputs can increase crosstalk even when the converter itself meets its stated 120 dB signal-to-noise specification.
推薦
Multichannel Recording System
The CS5381-KZZ can provide the stereo conversion section of a multichannel digital recording system, with two instances used for four analog channels when the architecture requires independent stereo pairs. Its 24-bit resolution and 192 kHz per-channel capability are useful for high-resolution capture, while the serial interface allows the converted streams to be directed into a system DSP. Multi-channel implementation requires checking master-clock and frame synchronization across converters. Consistent reference routing, matched grounding, and separate analog and digital return-current paths help prevent channel-to-channel offset and noise degradation.
推薦
Asynchronous Audio Conversion
The CS5381-KZZ is appropriate for an asynchronous conversion platform when the audio system must accept a clock unrelated to the downstream digital audio domain. The manufacturer reference architecture pairs the CS5381 with the CS8421 asynchronous sample-rate converter to create a jitter-immune analog-to-digital platform with dual stereo or four-channel TDM output. This arrangement places the CS5381's 24-bit stereo conversion capability upstream of the sample-rate conversion stage. Design verification should cover supported input and output rates, serial framing, clock ratios, and supported TDM configuration before committing the PCB layout.
推薦
Digital Broadcast Processing
The CS5381-KZZ can serve as the analog front end for a broadcast processing chain that requires two high-resolution audio inputs before encoding, routing, or transmission. Its 192 kHz per-channel operating ceiling and 120 dB stated signal-to-noise ratio support high-quality conversion, while the integrated filtering simplifies the signal path. Broadcast equipment designers should pay particular attention to grounding, connector-to-converter spacing, and digital clock isolation. The serial output should be routed toward the processor or encoder, whereas the analog input section should remain physically separate from high-current switching stages.
推薦
High-Resolution Music Capture
For high-resolution music capture, the CS5381-KZZ provides 24-bit stereo conversion at rates up to 192 kHz per channel. This combination is appropriate for preserving source detail through analog-to-digital conversion while leaving sufficient headroom for downstream gain control and mastering workflows. Analog input components should be selected and placed for the converter's documented application topology, with short, symmetrical paths and carefully controlled ground references. The 4.75 V to 5.25 V supply network should be decoupled at the device, and interface traces should not run beneath sensitive input circuitry.
推薦
推薦產品摘要
工程參考資料,適用於 CS5381-KZZ — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | CS5381K-KZZ |
|---|---|---|
| Package | 24-pin TSSOP | 24-pin TSSOP |
| Brand | Cirrus Logic | Cirrus Logic |
| Converter Function | 24-bit stereo audio ADC | 24-bit stereo audio ADC |
| Resolution | 24 bit | 24 bit |
| Input Channels | 2 channels | 2 channels |
| Maximum Sample Rate | 192 kHz per channel | 216 kHz per channel |
| Signal-to-Noise Ratio | 120 dB | 120 dB |
| Digital Interface | Serial I2S/LJ audio interface | Serial I2S/LJ audio interface |
主要差異化特點
- Higher stated sample-rate ceiling in the CS5381K family option (對比CS5381K-KZZ)
- High-resolution stereo conversion for the target device (對比CS5381K-KZZ)
- Integrated conversion and filtering for digital audio (對比CS5381K-KZZ)
設計說明
Separate the analog input network from serial audio data and clock routing. Place input filtering or gain components close to the converter pins, use a continuous ground reference for the analog section, and avoid routing digital clock traces beneath the inputs. The CS5381's 120 dB stated signal-to-noise ratio is measured under defined conditions, so real-board coupling can otherwise dominate the converter's internal performance.
Decouple the analog and digital supply pins locally using the capacitance and connection recommendations in the manufacturer application circuit. Keep the 4.75 V to 5.25 V analog supply path away from digital return currents and switching-node copper. Verify startup and power sequencing against the device's pin requirements so that the converter and its external clocking circuitry reach stable states in the intended order.
Use a continuous ground plane and provide a low-impedance return for master clock, serial clock, and serial data. Match the digital interface topology to the selected I2S or LJ mode and verify word-clock framing with the receiving device. If multiple converters share a clock, isolate branches where practical and use matched routing so that clock distribution does not create different sampling edges or inter-channel timing offsets.
Do not substitute a converter solely because it is described as a 24-bit stereo ADC. Confirm the complete pin list, analog input topology, master-clock requirement, digital format, supply pins, and package footprint against the CS5381 datasheet. The CS5381K-KZZ is the closest identified same-family option, but its ordering code and sample-rate characteristics still require review before it is treated as a replacement.
合規資訊
RoHS-compliant and lead-free status are identified in the component listing information. No AEC-Q100 qualification, REACH declaration, halogen-free declaration, or conflict-minerals statement was identified.