CS5533-AS - 4-Channel 16-Bit Ultra-Low-Noise ADC | Cirrus Logic
MPN： CS5533-AS ✗ 停產CS5533-AS 概覽
An analog-to-digital converter, or ADC, converts continuous analog voltage into a digital representation that can be processed by a microcontroller, DSP, FPGA, or embedded control system. The ADC is part of the broader hierarchy of data-converter integrated circuits, mixed-signal semiconductors, and signal-chain components. Its 16-bit resolution provides a nominal digital range of 65,536 codes, while the integrated PGIA allows the analog front end to bring low-amplitude sensor and measurement signals into the converter's input range.
The key advertised features of the CS5533-AS are four analog input channels, 16-bit resolution, and an ultra-low-noise PGIA. These characteristics make the converter suitable for precision instrumentation, industrial measurement, audio and communication equipment, sensor acquisition, and laboratory equipment. The PGIA is particularly important when the source signal is small relative to the ADC full-scale range, because it allows signal conditioning before conversion rather than relying only on digital correction afterward.
The CS5533-AS is associated with the CS5533 family of 16-bit and 24-bit ADCs with ultra-low-noise PGIAs. In a typical measurement chain, the input signal is first routed through the PGIA, where gain and filtering establish a suitable analog level for the sigma-delta modulator. The digital output is then processed and transferred to the host system. The converter's resolution and channel count are the most clearly identified technical characteristics in the distributor description; detailed electrical ratings, reference requirements, conversion timing, and recommended operating conditions should be confirmed in the manufacturer datasheet before design release.
Designers should pay particular attention to analog grounding, reference-voltage stability, input filtering, and the distinction between the CS5533-AS and the CS5533-ASZ ordering codes. The CS5533-ASZ is explicitly identified in the distributor data as a 16-bit, four-input, sigma-delta ADC in a 24-SSOP package. The suffix and tape-and-reel ordering variants should therefore not be substituted without checking the manufacturer ordering guide and land pattern.
This page combines the exact product identity, distributor descriptions, package references, application guidance, and a data-needs record for parameters that require confirmation from the full manufacturer datasheet.
直接替換替代品，適用於 CS5533-AS — 相同封裝，腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此產品無可直接替換的替代品。
申請替代品CS5533-AS 最大額定值與電氣特性
| Product Type | Analog-to-digital converter (ADC) |
| 解析度 | 16 bit |
| Number of Input Channels | 4 channels |
| Conversion Architecture | Sigma-delta |
| Integrated Analog Front End | Ultra-low-noise programmable-gain instrumentation amplifier (PGIA) |
| Nominal Output Code Count | 65,536 codes |
| Related Package | 24-SSOP for CS5533-ASZ ordering variant |
| 安裝類型 | Surface mount |
CS5533-AS 24-ssop for cs5533-asz ordering variant 腳位配置指南
CS5533-AS（24-ssop for cs5533-asz ordering variant 封裝）的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料： CS5533-AS.
請參閱 資料表 以查看完整腳位配置。
典型應用
CS5533-AS 適用於 6 應用s: Precision Industrial Sensor Acquisition, Laboratory and Instrumentation Front Ends, Audio Signal Measurement, Communication and Receiver Monitoring, Process-Control Monitoring, Portable and Embedded Data Acquisition.
Precision Industrial Sensor Acquisition
The CS5533-AS fits multi-channel industrial measurement systems that need to digitize several low-level sensor outputs with consistent resolution. Its four-channel sigma-delta architecture reduces the number of separate converter packages, while the 16-bit conversion resolution provides 65,536 nominal code positions for representing each sampled value. The integrated ultra-low-noise PGIA is useful when sensor outputs are relatively small and need gain before digitization. Use the converter in a measurement front end that can accommodate its exact input range, reference requirements, common-mode limits, and acquisition time. External anti-alias filtering, sensor excitation, surge protection, and calibration should be designed together with the analog channel layout. Grounding and reference stability are especially important because gain stage errors and reference drift can directly affect measurement accuracy.
推薦
Laboratory and Instrumentation Front Ends
CS5533-AS is suitable for laboratory instruments that acquire several low-amplitude measurement channels through a shared converter. The four analog inputs support multiplexed front-end architectures, and the 16-bit converter resolution provides a useful balance for precision measurement while retaining a compact mixed-signal implementation. The PGIA allows an instrument designer to select gain for different source levels before the signal reaches the sigma-delta modulator. In practice, the converter should be paired with stable references, low-noise supply rails, guarded analog routing, and input protection suitable for the test environment. The timing of digital transfers must be coordinated with the host processor. Exact conversion rate, input bandwidth, calibration behavior, and allowable gain combinations should be taken from the manufacturer electrical tables before setting the instrument's acquisition bandwidth.
推薦
Audio Signal Measurement
The CS5533-AS can support audio measurement and signal-processing systems where four analog channels must be converted for monitoring, mixing, or analysis. Its 16-bit resolution and ultra-low-noise programmable-gain amplifier are relevant when preserving small signal detail matters, particularly for microphone buffers, line-level monitoring, or test loops. The gain stage can bring a source closer to the converter's usable range before sampling, although the selected gain must remain within the device's electrical limits. A practical implementation should use low-distortion input networks, controlled reference voltage, short analog traces, and adequate grounding around the converter. Confirm bandwidth, noise density, total harmonic distortion, and output data rate for the intended signal band. These specifications determine whether the converter should be used for general monitoring, high-fidelity measurement, or only lower-bandwidth instrumentation.
推薦
Communication and Receiver Monitoring
CS5533-AS can be applied to communication equipment that requires monitoring several baseband or control signals. The four-channel, 16-bit sigma-delta format is appropriate where slowly changing or moderately sampled diagnostic signals must be represented reliably for supervisory logic. The ultra-low-noise PGIA may condition lower-level received or returned signals before conversion, while four channels help consolidate monitoring points. The receiving chain should include appropriate anti-alias filters and source-impedance control to prevent the gain stage and sampling network from introducing excessive error. Supply and reference routing must remain quiet because they influence the converter's noise and accuracy. Before using this part for a communication function, verify the required bandwidth, acquisition latency, clock configuration, digital interface, and input common-mode range. A host processor must also accommodate the converter's supported data format and timing.
推薦
Process-Control Monitoring
CS5533-AS is a reasonable candidate for process-control systems that monitor several process variables through shared analog channels. The 16-bit converter and integrated PGIA can reduce the need for separate low-level amplification circuits, while the four-channel count supports compact sensor-conditioning boards. In a control system, the analog front end must remain isolated from motors, relays, and switching power stages because those circuits can couple transient energy into low-level measurements. Use filtering, clamping, grounding, and reference arrangements appropriate to the sensor and process environment. The converter's acquisition rate should be sufficient for the control loop or supervisory update requirement, while the host controller handles scaling and alarms. Confirm the electrical limits, calibration coefficients, package pinout, and digital timing in the manufacturer documentation before approving a production design.
推薦
Portable and Embedded Data Acquisition
CS5533-AS can support embedded data-acquisition products that collect several analog measurements from compact sensors. Four channels and 16-bit resolution allow a product to monitor multiple physical variables without deploying four separate converter ICs. The integrated PGIA is advantageous in portable equipment where each channel may have a different signal amplitude, although power-management strategy must match the converter's actual supply and conversion requirements. A practical design should minimize switching-node coupling, maintain a low-noise reference, and use local decoupling close to the device. Data transfer to a microcontroller or DSP must match the supported digital interface and timing. The converter's exact power consumption, supply range, package dimensions, and conversion rate should be confirmed before making a battery-life or enclosure decision. Mechanical constraints also require checking the exact drawing for the CS5533-AS ordering code.
推薦
推薦產品摘要
工程參考資料，適用於 CS5533-AS — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 |
|---|---|
| Product Type | 4-channel analog-to-digital converter |
| Brand | Cirrus Logic |
| Resolution | 16 bit |
| Input Channels | 4 channels |
| Conversion Architecture | Sigma-delta |
| Programmable Gain Stage | Ultra-low-noise PGIA |
| Nominal Code Count | 65,536 codes |
| Related Package Information | CS5533-ASZ identified as 24-SSOP |
主要差異化特點
- Four-channel integration (對比Single-channel or lower-channel ADC options)
- Integrated programmable analog gain (對比External-gain-stage ADC designs)
- 16-bit mixed-signal conversion (對比Lower-resolution general-purpose converters)
設計說明
Route analog inputs as short, compact traces and place their anti-alias or protection networks close to the corresponding pins. Keep the PGIA, reference, and converter return path away from digital clocks, switching inductors, relay contacts, and high-current power traces. Use a continuous ground reference beneath the analog section where the package and board stackup permit. Exact pin locations and the recommended layout geometry must be taken from the manufacturer pinout and application guidance.
Provide low-noise, locally decoupled supply rails and a stable reference because converter performance depends on the analog operating environment. Place the required input and output bypass capacitors at the pins using the values and placement shown in the manufacturer application circuit. Separate sensitive analog routing from switching-converter paths, and evaluate power-supply rejection in the completed board rather than assuming the converter's internal specifications alone determine system noise.
Do not interchange ordering suffixes without checking the manufacturer ordering table. The distributor information separately identifies CS5533-AS, CS5533-ASZ, and CS5533-ASZR, while also describing CS5533-ASZ as a 24-SSOP device. Confirm the package, temperature range, tape-and-reel status, and grade associated with the exact suffix. Likewise, confirm source impedance, common-mode range, allowed gains, acquisition rate, and digital timing before finalizing the analog network.
Treat reference and analog traces as sensitive signal paths rather than ordinary routing. Use a low-impedance reference distribution network, avoid long stubs, and place filtering close to the converter or sensor according to the required corner frequency. The PGIA can amplify both wanted signals and coupled noise, so incorrect grounding or high-impedance source conditions may degrade conversion accuracy. Validate the completed design with the intended source resistance, sensor bandwidth, cable length, and digital activity pattern.
合規資訊
The available product records do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Confirm these attributes in the current manufacturer documentation before regulated production use.
