DP83620SQX/NOPB - 10/100 Ethernet PHY | Texas Instruments
MPN: DP83620SQX/NOPB ✓ 啟用中DP83620SQX/NOPB 概覽
An Ethernet physical-layer transceiver is the circuit that converts logical data between a network controller’s digital interface and signals carried over twisted-pair or fiber media. The DP83620 belongs to the Ethernet PHY transceiver hierarchy, where the PHY works with a network MAC or controller to provide network connectivity. Its 10/100-Mbps support covers both 10BASE-T and 100BASE-TX Ethernet while the MII and RMII interfaces connect it to the digital host controller.
Key features include error-free operation over 150 m of CAT5 cable, 8 kV human-body-model ESD protection, 2.5 V and 3.3 V I/O operation, and a selectable 25 MHz clock output. The device also provides TDR-based cable diagnostics and cable-length detection, dynamic link-quality monitoring, and packet built-in self-test capability. These features support commissioning and maintenance in industrial networking equipment.
The DP83620 uses low-power operation with intelligent power-down states to reduce energy use when the link is inactive. Its deterministic latency supports time-sensitive industrial control, while synchronized clock output can reduce the number of separate clocking components required in a system. The manufacturer identifies the DP83620 as optimized for cable-length performance extending beyond IEEE specifications.
Typical uses include industrial Ethernet switches, programmable logic controllers, factory automation equipment, embedded control systems, telecom line cards, and copper-to-fiber interface designs. The 3.3 V power architecture and 2.5 V or 3.3 V digital interface options simplify integration with both 3.3 V controllers and mixed-voltage digital systems.
PCB implementation should preserve the manufacturer’s recommended decoupling, controlled-impedance layout, and exposed-pad thermal arrangement. Keep the PHY clock and interface traces short, provide a continuous ground reference, and route high-speed differential pairs away from noisy power-conversion stages. Use the cable diagnostics and link-quality monitoring features to support field commissioning and fault isolation.
This page combines the manufacturer’s device characteristics, ordering information, package details, and documented industrial Ethernet functions with practical design guidance. It also identifies confirmed same-footprint alternatives and explains where a direct replacement can be considered without implying that every ordering suffix is electrically or mechanically interchangeable.
直接替換替代品,適用於 DP83620SQX/NOPB — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: DP83620SQX/NOPB (相同外形與佔位) — 差異在於 Package, Cable-Length Performance, Fiber Support, Operating Temperature Range, Temperature Grade.
DP83620SQ/NOPB
✅ 直接替換聯絡詢價
查看資料表 →DP83620SQE/NOPB
✅ 直接替換聯絡詢價
查看資料表 →DP83620SQX/NOPB 規格
| Product Type | Single-port Ethernet physical-layer transceiver |
| Ethernet Data Rate | 10/100 Mbps |
| Number of Ports | 1 port |
| MAC Interface | MII and RMII |
| 供應電壓 | 3.3 V |
| I/O Voltage | 2.5 V or 3.3 V |
| Temperature Grade | Industrial temperature |
| 工作溫度 | -40 °C to +85 °C |
| 封裝 | 48-pin WQFN, 7 x 7 mm |
| 安裝類型 | Surface mount |
| Clock Output | 25 MHz |
| Maximum Supported Cable Length | 150 m CAT5 cable |
| ESD Protection | 8 kV human body model |
| Cable Diagnostics | TDR-based cable diagnostic and cable-length detection |
| Test Support | JTAG and 10/100-Mbps packet built-in self-test |
| Media Support | Copper Ethernet with fiber support |
| RoHS 狀態 | Compliant |
| Lead-Finish Code | NOPB |
| Maximum Pin Count | 48 pins |
DP83620SQX/NOPB 48-pin wqfn, 7 x 7 mm 腳位配置指南
DP83620SQX/NOPB(48-pin wqfn, 7 x 7 mm 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: DP83620SQX/NOPB.
請參閱 資料表 以查看完整腳位配置。
典型應用
DP83620SQX/NOPB 適用於 6 應用s: Industrial Ethernet Switches, Programmable Logic Controllers, Factory Automation Gateways, Embedded Control Systems, Telecom Line Cards, Copper-to-Fiber Network Interfaces.
Industrial Ethernet Switches
The DP83620SQX/NOPB fits a single-port 10/100-Mbps copper Ethernet section of an industrial switch because it combines MII and RMII host interfaces with operation from -40 °C to +85 °C. Its 25 MHz clock output can support shared system timing, while TDR-based cable diagnostics and cable-length detection assist commissioning. The 48-pin WQFN preserves a compact footprint, and 8 kV human-body-model ESD protection improves robustness at an exposed network connector. Validate magnetics, termination, controlled-impedance routing, and thermal performance against the manufacturer reference design before production release.
推薦
Programmable Logic Controllers
The DP83620SQX/NOPB is suitable for PLC communication ports that require deterministic Ethernet timing over 10/100-Mbps copper links. The manufacturer highlights deterministic low transmit and receive latency, while the industrial temperature range of -40 °C to +85 °C suits factory-floor equipment. RMII can reduce host-interface wiring when appropriate, and the MII option supports designs requiring separate parallel signals. Cable diagnostics help maintenance teams identify installation faults. Confirm controller timing, isolation requirements, grounding strategy, and network topology in the system design.
推薦
Factory Automation Gateways
The DP83620SQX/NOPB supports factory automation gateways that bridge embedded controllers to a 10/100-Mbps Ethernet network. Its TDR cable diagnostics, cable-length detection, and dynamic link-quality monitoring provide useful commissioning and fault-isolation functions beyond basic link negotiation. The 3.3 V supply and selectable 2.5 V or 3.3 V I/O operation support mixed-voltage host designs. Use the 48-pin WQFN footprint with a properly designed thermal pad, place input and output capacitors as directed by the manufacturer, and keep copper routing away from switching-power stages.
推薦
Embedded Control Systems
The DP83620SQX/NOPB gives an embedded controller a dedicated 10/100-Mbps Ethernet physical layer with MII or RMII connectivity. Its low-power design includes intelligent power-down states for systems that spend significant time idle, while the selectable 25 MHz clock output can simplify timing distribution. The industrial temperature range supports equipment deployed beyond controlled office environments. Review strap settings, controller interrupt behavior, link timing, and cable diagnostics during hardware bring-up to ensure software can manage initialization and fault recovery correctly.
推薦
Telecom Line Cards
The DP83620SQX/NOPB can provide copper-network connectivity on a telecom line card requiring a 10/100-Mbps PHY with deterministic latency. The MII interface supports parallel controller connectivity, and the 25 MHz clock output is useful where a common reference is needed. Dynamic link-quality monitoring and TDR diagnostics help field teams identify line or cable faults. Because telecom equipment may impose additional isolation, safety, and qualification requirements, verify those requirements separately and retain the manufacturer’s recommended layout and component-selection guidance.
推薦
Copper-to-Fiber Network Interfaces
The DP83620SQX/NOPB is suitable for the copper Ethernet side of a copper-to-fiber interface because the device supports 10/100-Mbps operation and fiber support alongside its standard network features. The PHY can connect to the system controller through MII or RMII while the optical conversion stage handles the fiber medium. Its cable diagnostics remain useful for diagnosing the copper segment independently. Design the two media paths to avoid ground and return-path problems, and confirm the electrical requirements of the external fiber-interface circuitry in the complete system reference design.
推薦
推薦產品摘要
工程參考資料,適用於 DP83620SQX/NOPB — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | DP83620SQ/NOPB | DP83620SQE/NOPB |
|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 48-pin WQFN (7 x 7 mm) | 48-pin WQFN (7 x 7 mm) | 48-pin WQFN (7 x 7 mm) |
| Ethernet Data Rate | 10/100 Mbps | 10/100 Mbps | 10/100 Mbps |
| Number of Ports | 1 port | 1 port | 1 port |
| MAC Interface | MII and RMII | MII and RMII | MII and RMII |
| Supply Voltage | 3.3 V | 3.3 V | 3.3 V |
| I/O Voltage | 2.5 V or 3.3 V | 2.5 V or 3.3 V | 2.5 V or 3.3 V |
| Maximum Supported Cable Length | 150 m CAT5 cable | 150 m CAT5 cable | 150 m CAT5 cable |
| ESD Protection | 8 kV human body model | 8 kV human body model | 8 kV human body model |
| Clock Output | 25 MHz | 25 MHz | 25 MHz |
主要差異化特點
- Industrial diagnostic capability in a single-port PHY (對比DP83620SQ/NOPB)
- Long cable operation with field diagnostics (對比DP83620SQE/NOPB)
- Flexible host-controller and clocking support (對比DP83620SQ/NOPB)
設計說明
Implement the Ethernet differential pairs as controlled-impedance traces with continuous reference planes and minimal stubs. Follow the manufacturer’s reference layout for the 48-pin WQFN, including the exposed-pad connection, input and output decoupling, network magnetics, and RJ45-related protection. Keep switching regulators and inductors away from the PHY and magnetics because high-current edges can degrade link margin even when direct data traces are correctly routed.
Treat the MII or RMII interface, 25 MHz clock, and Ethernet differential pairs as separate high-speed routing groups. Maintain the timing and impedance constraints stated in the manufacturer interface guidelines, provide a solid ground plane beneath the device, and avoid test pads or vias that disrupt return paths. If the board uses RMII, verify clock-output and reference-clock topology carefully because an incorrect source configuration can create timing margin problems.
The exposed thermal pad is part of the 48-pin WQFN thermal design and should connect to the ground plane through the manufacturer-recommended pad and via pattern. Do not isolate the pad or replace the thermal-via field with a simple copper pour unless the package documentation explicitly permits it. Check junction-temperature rise against ambient operating conditions and the dissipation associated with the selected supply and interface configuration.
Do not approve a substitute from package dimensions alone. For each DP83620 ordering option, compare pin names, strap behavior, reset requirements, clock configuration, temperature grade, exposed-pad construction, and qualification. A 48-pin WQFN footprint can fit physically while still failing electrically if a board depends on a different ordering option’s configuration or operating range.
合規資訊
The comparison record identifies the DP83620SQX/NOPB as RoHS compliant and not AEC-Q100 qualified. REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from current manufacturer documentation.