EP4CE30F29C7N - 28,848-LC 200 MHz FPGA | Altera | FBGA-780
MPN： EP4CE30F29C7N ✓ 啟用中EP4CE30F29C7N 概覽
A field-programmable gate array is a semiconductor in which the digital circuit is configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, combining configurable logic elements, embedded memory, and programmable I/O blocks. Unlike a fixed-function application-specific integrated circuit, an FPGA allows design changes, field updates, and parallel hardware implementations without fabricating a new ASIC. The Cyclone IV E family targets cost-sensitive embedded and industrial systems where density, I/O capacity, and reconfigurability matter.
The EP4CE30F29C7N combines 28,848 logic elements with 594 Kb of RAM. Its 532 I/O pins provide substantial connectivity for buses, memory interfaces, parallel data acquisition, and control peripherals. The device supports operation up to 85°C, making it suitable for industrial equipment and other embedded systems requiring a higher operating-temperature limit than commercial-temperature components.
The F29 designation identifies the package-oriented device configuration, while C7 and N are ordering-code suffixes associated with the particular speed, temperature, and qualification options. These suffixes must be checked against the complete ordering information before substituting another member of the Cyclone IV E family. Programming and configuration behavior are defined through the Cyclone IV device architecture rather than a fixed instruction set stored in permanent mask ROM.
Typical uses include industrial control and automation, embedded data-acquisition systems, network-interface control, instrumentation, test equipment, and general-purpose signal processing. A parallel datapath can be implemented across the configurable logic elements while block RAM stores coefficients, buffers, or packet data. The high pin count also supports memory-intensive interfaces and multi-channel acquisition when the PCB can accommodate the FBGA-780 land pattern and its power-delivery requirements.
A key design consideration is that software, timing constraints, pin assignments, configuration memory, and the PCB footprint must be validated together when changing speed grades or ordering suffixes. Review the Cyclone IV device handbook and device pin-connection guidelines when assigning banks, configuring I/O standards, or planning power rails. This page combines ordering information, electrical characteristics, package facts, and application guidance to support initial design selection and engineering review.
This product overview distinguishes the EP4CE30F29C7N from related package, speed, and temperature variants by focusing on the exact ordering part number. It also highlights the device's 28,848 logic elements, 594 Kb of RAM, 532 I/O pins, 1.2 V supply, 200 MHz maximum frequency, 85°C temperature rating, and 780-pin FBGA package so engineers can evaluate fit before beginning PCB and firmware development.
直接替換替代品，適用於 EP4CE30F29C7N — 相同封裝，腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號： EP4CE30F29C7N （相同外形與佔位） — 差異在於 Package, Configuration Modes, Speed Grade, RoHS Status, Logic Elements.
EP4CE30F29C7
✅ 直接替換📋 參考替代品（不在目錄中）
EP4CE30F29C8N
✅ 直接替換聯絡詢價
查看資料表 →EP4CE30F29C8LN
✅ 直接替換📋 參考替代品（不在目錄中）
EP4CE30F29I8LN
✅ 直接替換聯絡詢價
查看資料表 →EP4CE40F29C8N
✅ 直接替換聯絡詢價
查看資料表 →EP4CE30F29C7N 最大額定值與電氣特性
| Device Type | FPGA |
| FPGA Family | Cyclone IV E |
| Logic Elements | 28,848 |
| Logic Blocks | 28,848 |
| Embedded RAM | 594 Kb |
| Maximum Frequency | 200 MHz |
| Number of I/O Pins | 532 |
| 供應電壓 | 1.2 V |
| Process Technology | 60 nm |
| 封裝 | FBGA-780 |
| Package Pin Count | 780 pins |
| 安裝類型 | Surface Mount |
| Maximum Operating Temperature | 85 °C |
| Lead-Free Status | Lead-free |
| RoHS 狀態 | Compliant |
| REACH Status | Does not meet REACH SVHC compliance requirements |
| MSL 等級 | 3 (168 hours) |
| ECCN | 3A991D |
| HTSUS Code | 8542.39.0001 |
EP4CE30F29C7N 780 pins 腳位配置指南
EP4CE30F29C7N（780 pins 封裝）的腳位配置。 此數位 IC 包含 GPIO、通訊介面（UART、SPI、I2C）與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料： EP4CE30F29C7N.
請參閱 資料表 以查看完整腳位配置。
典型應用
EP4CE30F29C7N 適用於 6 應用s: Industrial Control and Automation, Embedded Data Acquisition, Network Interface Control, Instrumentation and Test Equipment, Embedded Signal Processing, Secure System Control and Cryptography.
Industrial Control and Automation
The Altera EP4CE30F29C7N fits industrial controllers that combine deterministic parallel logic with extensive external connectivity. Its 28,848 logic elements can implement motion sequencing, interlocks, state machines, and protocol handling, while 532 I/O pins support field-bus interfaces, discrete sensors, actuator outputs, and status indicators. The device operates with a 1.2 V core supply and reaches an 85 °C maximum temperature. A production design should also implement watchdogs, safe-state behavior, and configuration validation rather than relying only on FPGA logic.
推薦
Embedded Data Acquisition
The EP4CE30F29C7N is suitable for parallel acquisition systems where multiple input channels must be sampled, conditioned, and transferred efficiently. Its 532 I/O pins provide substantial parallel connectivity, while 594 Kb of RAM can implement buffering, windowing, and intermediate data stages. The 200 MHz device target supports pipelined processing, and the 85 °C rating fits many industrial environments. Signal integrity, input thresholds, reference design, and simultaneous switching-noise analysis must be addressed at the board level.
推薦
Network Interface Control
The Cyclone IV E EP4CE30F29C7N can serve as the programmable control engine in embedded network-interface equipment, combining packet framing, descriptor handling, status reporting, and host-interface logic. Its 28,848 logic elements and 594 Kb of embedded RAM provide resources for moderate-rate packet pipelines, while the broad I/O count supports external transceivers, memories, and parallel buses. The 1.2 V core supply favors modern digital integration, but clocking, line-rate timing closure, and transceiver power sequencing remain key implementation considerations.
推薦
Instrumentation and Test Equipment
The EP4CE30F29C7N is useful in programmable instrumentation because it combines logic density, embedded memory, and numerous I/O resources in one configurable device. Engineers can implement acquisition sequencing, calibration tables, trigger logic, waveform control, and communication protocols in parallel. Its maximum operating frequency of 200 MHz supports pipelined signal processing, while the 85 °C maximum temperature supports many industrial instrument environments. Calibration storage, reference-clock jitter, analog isolation, and deterministic trigger latency require system-level validation.
推薦
Embedded Signal Processing
The Altera EP4CE30F29C7N can implement fixed-point filters, correlation, modulation, decimation, and data-format conversion using parallel logic and embedded RAM. Its 28,848 logic elements allow multiple arithmetic pipelines to operate concurrently, while the 594 Kb of RAM can hold coefficients, circular buffers, and intermediate samples. The 200 MHz maximum frequency supports efficient clocked processing, and the large I/O count simplifies streaming interfaces. Designers should select fixed-point precision, pipeline latency, memory bandwidth, and clocking to meet the target throughput.
推薦
Secure System Control and Cryptography
The EP4CE30F29C7N can implement protocol handling, secure boot control, key-management logic, and hardware-assisted authentication in embedded systems. Its configurable logic allows security functions to be isolated from the main application, and its 532 I/O pins support command interfaces, status signals, and external secure storage. The 60 nm Cyclone IV E implementation should be assessed against the required threat model, including side-channel exposure, startup behavior, fault injection, and update authentication. Cryptographic validation remains necessary before production use.
推薦
推薦產品摘要
工程參考資料，適用於 EP4CE30F29C7N — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | EP4CE30F29C7 | EP4CE30F29C8N | EP4CE30F29C8LN | EP4CE30F29I8LN | EP4CE40F29C8N |
|---|---|---|---|---|---|---|
| Brand | Altera | Altera | Altera | Altera | Altera | Altera |
| Package | FBGA-780 | FBGA-780 - same | FBGA-780 - same | FBGA-780 - same | FBGA-780 - same | FBGA-780 - same |
| Device Family | Cyclone IV E EP4CE30 | Cyclone IV E EP4CE30 | Cyclone IV E EP4CE30 | Cyclone IV E EP4CE30 | Cyclone IV E EP4CE30 | Cyclone IV E EP4CE40 |
| Ordering Suffix | C7N | C7 | C8N | C8LN | I8LN | C8N |
主要差異化特點
- The exact C7N ordering configuration (對比EP4CE30F29C8N)
- Direct EP4CE30 family functional consistency (對比EP4CE30F29C7)
- Lower device-density target than the EP4CE40 option (對比EP4CE40F29C8N)
設計說明
Use the exact EP4CE30 F29 package dimensions, ball map, solder-mask definition, and recommended land pattern from Altera. The 780-pin FBGA requires dense escape routing, so route power, ground, configuration, clock, and high-speed signals as separate constraint classes. Check every ball assignment against the exact ordering code; a compatible package outline does not make an EP4CE30 and EP4CE40 pinout interchangeable without device-specific verification.
Plan the 1.2 V core rail and the device's required I/O supplies separately, with dense decoupling and low-impedance power and ground distribution. The package has hundreds of balls, many of which support power delivery, so spreading connections across the array improves current distribution. Validate steady-state and transient current against the selected speed grade and I/O activity, and test power-up and power-down sequencing with all external peripherals attached.
The FPGA can dissipate power that varies with logic utilization, switching activity, I/O loading, and the selected speed grade. Do not use the 200 MHz headline frequency as a continuous operating condition; constrain the actual design clocks and pin activity through timing analysis. Preserve thermal escape paths in the PCB stack-up, provide adequate copper on power and ground balls, and evaluate junction temperature for the maximum ambient condition and worst-case workload.
Changing only the final ordering suffix can alter speed, temperature, qualification, or commercial attributes. Record the complete OPN in the schematic bill of materials, lock the device name in the Quartus project, and review the compiler-generated pin report after every constraint change. Also verify the configuration source, JTAG behavior, startup option, and recovery method because a power-on fault can prevent the application from reaching normal logic.
合規資訊
The device is identified as RoHS compliant and lead-free, while the product information states that it does not meet REACH SVHC compliance requirements. AEC-Q100, halogen-free status, and conflict-minerals status are not stated.