Maxim Integrated

ICL7650CPD+ - 8V Chopper-Stabilized Op Amp | Maxim Integrated

MPN: ICL7650CPD+ ✓ 啟用中
8 V single supply Vdss 14-pin PDIP Package
MOQ: 1 |

ICL7650CPD+ 概覽

The Maxim Integrated ICL7650CPD+ is a single-amplifier, chopper-stabilized operational amplifier rated for an 8 V supply in a 14-pin PDIP package. Its zero-drift architecture minimizes input offset voltage drift with time and temperature, while its low input bias current and low offset voltage make it suitable for precision low-level signal processing.

An operational amplifier is a voltage-controlled differential amplifier that uses feedback to perform signal conditioning, amplification, filtering, and buffering. The ICL7650CPD+ belongs to the zero-drift or chopper-stabilized amplifier family within the broader operational-amplifier, analog IC, and semiconductor hierarchies. Chopper stabilization continuously corrects offset errors that would otherwise drift as temperature, supply voltage, and operating time change.

The ICL7650CPD+ provides one amplifier circuit in a 14-pin PDIP package and operates from a single 8 V supply, as identified by the manufacturer data for the ICL7650 family. Its principal advantages are low input offset voltage, low input bias current, wide bandwidth, and exceptionally low drift over time and temperature. These characteristics make it useful when a conventional amplifier would introduce unacceptable DC error or long-term measurement drift.

Chopper operation trades static simplicity for very low offset drift. Internal chopping converts residual offset to an AC component so that the amplifier can null that error continuously. Designers should still account for input-referred noise, clock-related artifacts, settling behavior, and the finite open-loop gain when optimizing a precision measurement chain. The exact input offset, voltage gain, bandwidth, input bias current, and noise limits must be taken from the manufacturer datasheet for the selected temperature grade.

Typical uses include low-level sensor signal conditioning, precision current measurement, bridge excitation and instrumentation, laboratory instrumentation, and low-level transimpedance amplification. For a bridge-based sensor, the amplifier can reduce DC offset errors that would otherwise appear as a false measurement at the output. For current sensing, its low bias current helps avoid unwanted voltage errors in the sense path.

PCB implementation requires care because this legacy PDIP device is intended for through-hole assembly rather than high-density surface-mount designs. Keep sensitive input and feedback traces short, maintain a quiet return path, and place compensation or filtering components close to the relevant pins. Verify the clock and nulling configuration against the manufacturer’s application guidance before high-gain operation.

This product page combines the official ICL7650 family datasheet, exact package and supply information, drop-in candidate analysis, comparison parameters, and practical implementation guidance. It is intended to help engineers determine whether the ICL7650CPD+ is appropriate for a precision, low-level signal-processing design.

直接替換替代品,適用於 ICL7650CPD+ — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

ICL7650APD+

✅ 直接替換 ⚠️ 規格未經驗證
📦 PDIP-14
Same 14-pin PDIP footprint and 8 V supply class; pin-count difference is 0% (14/14), while the exact offset-voltage delta requires datasheet verification.

📋 參考替代品(不在目錄中)

ICL7650BPD+

✅ 直接替換 ⚠️ 規格未經驗證
📦 PDIP-14
Same 14-pin PDIP footprint and 8 V supply class; pin-count difference is 0% (14/14), with variant-specific offset limits requiring datasheet verification.

📋 參考替代品(不在目錄中)

ICL7653CPD+

✅ 直接替換 ⚠️ 規格未經驗證
📦 PDIP-14
Same 14-pin PDIP footprint and zero-drift amplifier family; pin-count difference is 0% (14/14), while offset, noise, and gain differences require datasheet verification.

📋 參考替代品(不在目錄中)

TC7650CPA

✅ 直接替換
📦 PDIP-14
Cross-brand 14-pin PDIP chopper-amplifier candidate; pin-count difference is 0% (14/14), but offset, noise, and common-mode differences require manufacturer verification.

📋 參考替代品(不在目錄中)

TLC2652CP

✅ 直接替換
📦 PDIP-14
Cross-brand 14-pin PDIP chopper-stabilized candidate; pin-count difference is 0% (14/14), while supply limits, offset, and noise differences require manufacturer verification.

📋 參考替代品(不在目錄中)

ICL7650CPD+ 最大額定值與電氣特性

Amplifier Type Chopper-stabilized zero-drift operational amplifier
Number of Circuits 1 circuit
供應電壓 8 V single supply
封裝 14-pin PDIP
安裝類型 Through-hole

ICL7650CPD+ 14-pin pdip 腳位配置指南

ICL7650CPD+(14-pin pdip 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。

ICL7650CPD+ 的 14-pin pdip 封裝腳位圖

無詳細腳位定義資料: ICL7650CPD+.

請參閱 資料表 以查看完整腳位配置。

典型應用

ICL7650CPD+ 適用於 6 應用s: Precision Bridge Sensor Signal Conditioning, Low-Level Current Sensing, Instrumentation and Measurement Amplification, Transimpedance Signal Amplification, Low-Level Process Monitoring, Medical and Analytical Instrument Signal Chains.

🏭

Precision Bridge Sensor Signal Conditioning

The ICL7650CPD+ fits low-level bridge measurement because its chopper-stabilized architecture suppresses offset drift over time and temperature. Place the amplifier where a small differential sensor voltage must be amplified without adding substantial DC error. The confirmed 14-pin PDIP package supports through-hole laboratory and industrial instrumentation, while the single 8 V supply simplifies power planning. Because the device is a single amplifier rather than a complete instrumentation amplifier, verify common-mode voltage, input bias current, and achievable closed-loop gain before using it directly across a bridge.

⚡

Low-Level Current Sensing

ICL7650CPD+ can amplify the voltage generated by a shunt or current-sense element when the sensed level is small and precision is important. Its zero-drift operation helps prevent offset changes from dominating a measurement over time, while the 8 V single-supply arrangement provides a straightforward biasing point. The design must remain within the amplifier’s common-mode and output-swing limits, and input-bias current must be checked against the source impedance. A shielded, short input route reduces leakage and pickup in millivolt-level measurements.

🖥️

Instrumentation and Measurement Amplification

The ICL7650CPD+ is appropriate for laboratory instrumentation that amplifies low-level sensor outputs where long-term offset drift matters. Chopper stabilization continuously corrects the residual offset error, allowing the circuit to retain useful accuracy without frequent recalibration. The single amplifier in a 14-pin PDIP package is especially convenient for legacy instrument designs and through-hole prototyping. Engineers should evaluate noise, gain-bandwidth product, settling time, and clock-related artifacts against the required measurement bandwidth.

📱

Transimpedance Signal Amplification

ICL7650CPD+ can serve in a low-level transimpedance stage for photodiode, optical-sensor, or high-impedance detector signals when the target bandwidth is modest. Low input bias current is valuable because detector-generated current can create an unwanted voltage error across a large feedback resistor, and chopper stabilization limits DC offset drift. The 8 V single supply and 14-pin PDIP outline simplify legacy analog board construction. Confirm input capacitance, noise, stability, and feedback compensation because a transimpedance stage can become unstable at frequencies beyond the basic offset specifications.

🏭

Low-Level Process Monitoring

ICL7650CPD+ is useful in process-control and industrial monitoring circuits that resolve small voltage changes from pressure, temperature, or chemical sensors. Its low-drift behavior helps preserve calibration stability, and its through-hole PDIP package is practical for instruments built around plated-through-hole analog boards. The amplifier should operate within its 8 V supply framework, with attention to sensor excitation, common-mode range, and input filtering. If the sensor is remote or the environment is electrically noisy, guarded routing and appropriately shielded cabling are needed in addition to device-level error analysis.

💊

Medical and Analytical Instrument Signal Chains

ICL7650CPD+ can amplify small physiological or analytical signals where DC offset stability is more useful than high-speed performance. Chopper stabilization reduces input-offset movement caused by temperature and elapsed operating time, supporting repeatable readings from resistive sensors and low-level transducers. The 14-pin PDIP package supports laboratory medical equipment and through-hole analog modules. Safety-critical designs require separate review of isolation, leakage, creepage, and applicable qualification; the component itself should not be treated as qualified merely because it is used in a medical signal path.

What is the ICL7650CPD+?
The ICL7650CPD+ is a single chopper-stabilized, zero-drift operational amplifier in a 14-pin PDIP package. Maxim Integrated describes the ICL7650 family as a precision amplifier for low-level signal processing, combining low input offset voltage, low input bias current, wide bandwidth, and low drift over time and temperature. The ICL7650CPD+ is associated with a single 8 V supply, making it suitable for precision measurement and signal-conditioning circuits.
What is the operating voltage of ICL7650CPD+?
The ICL7650CPD+ operates from a single 8 V supply. The official Maxim Integrated ICL7650 and ICL7650B datasheet covers the device family and provides the authoritative electrical characteristics and recommended operating conditions. Confirm the full allowable input voltage and common-mode limits for the exact temperature grade before applying the amplifier outside a laboratory supply arrangement.
Where can I download the ICL7650CPD+ datasheet PDF?
The ICL7650CPD+ datasheet PDF is available from Maxim Integrated through the official ICL7650/ICL7650B data-sheet link on this page. The document also covers ICL7650B and ICL7653 devices, so use the ordering table and electrical-characteristics tables to identify the information that applies specifically to ICL7650CPD+. The manufacturer data-sheet is the controlling source for pin functions and operating limits.
Where can I find the ICL7650CPD+ pinout?
The ICL7650CPD+ pinout is found in the pin-configuration and pin-description sections of the official Maxim Integrated ICL7650/ICL7650B datasheet. The device uses a 14-pin PDIP outline, with numbering shown from pin 1 through pin 14. Use the package drawing and pin-description table together so that clock, nulling, supply, input, and output assignments are matched to the physical orientation on the board.
What is the best drop-in replacement for ICL7650CPD+?
The closest drop-in candidates identified for ICL7650CPD+ are the Maxim Integrated ICL7650APD+ and ICL7650BPD+ devices, followed by the Microchip TC7650CPA and Texas Instruments TLC2652CP in the 14-pin PDIP class. Confirm pinout, supply range, offset limits, noise, and stability against the manufacturer datasheets before substitution. A package match alone does not guarantee identical precision performance.
What can replace ICL7650CPD+?
ICL7650CPD+ can be replaced only after checking electrical behavior as well as the 14-pin PDIP footprint. Same-family Maxim Integrated variants are the first candidates to evaluate, while TC7650CPA and TLC2652CP provide potential cross-brand alternatives in the same package class. Review input polarity, nulling pins, clock configuration, common-mode range, output swing, offset drift, and noise before approving a drop-in substitution.
ICL7650CPD+ vs TC7650CPA - which is better for low-level sensing?
ICL7650CPD+ is preferable when a design is already qualified around Maxim Integrated’s chopper-stabilized amplifier behavior and documented ICL7650 characteristics. TC7650CPA is a potential 14-pin PDIP replacement for cost or availability reasons, but its offset limits, noise, stability, and common-mode behavior must be compared directly. Neither device should replace the other without measurement at the intended gain, supply, temperature, and input level.
ICL7650CPD+ vs TLC2652CP - what is the difference?
Both ICL7650CPD+ and TLC2652CP are chopper-stabilized operational amplifiers offered in a 14-pin PDIP package, but matching the package does not make every electrical characteristic identical. The meaningful differences are input offset voltage, offset drift, noise, bandwidth, supply range, and clock-related behavior. Use the official datasheets for each part and verify the actual circuit rather than assuming a literal pin-for-pin equivalent.
When should I choose ICL7650CPD+ over TLC2652CP?
Choose ICL7650CPD+ when an existing precision-measurement design is validated with the Maxim ICL7650 family and needs its documented low-drift operation. Choose TLC2652CP only after confirming its offset, noise, common-mode, and stability specifications satisfy the application. The decisive criterion is measured error performance under the intended gain and temperature range, not simply whether both amplifiers use a 14-pin PDIP package.
Is ICL7650CPD+ suitable for bridge sensor measurement?
Yes, ICL7650CPD+ is suitable for low-level bridge measurement when its input offset and drift characteristics meet the required accuracy. Its zero-drift architecture limits time- and temperature-dependent DC error, while low input bias current reduces errors in high-impedance sensor paths. Use a suitable instrumentation amplifier or differential stage when common-mode range, input noise, and gain requirements exceed those of this single amplifier.
How should ICL7650CPD+ be used in a precision current measurement circuit?
ICL7650CPD+ can amplify a low-level voltage representing current, but its input bias current and offset voltage must be included in the total error budget. Keep the high-impedance input path short and use guarding or shielding if leakage is significant. Confirm common-mode limits before connecting a shunt because the ICL7650CPD+ operates from an 8 V supply and does not accept arbitrary shunt voltage ranges.
What are the key specifications of ICL7650CPD+ that engineers should know?
The key confirmed characteristics are one amplifier circuit, an 8 V single supply, chopper-stabilized zero-drift operation, and a 14-pin PDIP package. The manufacturer family also emphasizes low input offset voltage, low input bias current, wide bandwidth, and low drift over time and temperature. Obtain the exact maximum offset, bias current, bandwidth, slew rate, noise, and temperature limits from the official data-sheet tables before finalizing a design.
Where to buy ICL7650CPD+ online?
Use the Request a Quote form on this page to ask for ICL7650CPD+ availability, minimum order quantity, and current lead time. The request should include the exact ICL7650CPD+ ordering code, the 14-pin PDIP package requirement, and your production quantity. A quotation response is the appropriate way to establish current commercial terms for this legacy through-hole amplifier.
What is the price of ICL7650CPD+?
Current commercial pricing for ICL7650CPD+ is obtained through the Request a Quote form on this page. Include the exact MPN, required quantity, and delivery location so the response reflects the appropriate order basis. Because distributor inventories and commercial terms can change, the form provides a current quote instead of publishing a potentially stale standalone price.
What is the lead time for ICL7650CPD+ and is it in stock?
Request current ICL7650CPD+ stock and lead-time information through the Request a Quote form on this page. State the required quantity, packaging preference, destination, and whether the order is for prototype or production. The product remains listed by Maxim Integrated, but a manufacturing forecast or availability commitment should be established through the quotation process before scheduling a build.

工程參考資料,適用於 ICL7650CPD+ — 比較、設計指引及合規資訊。

選型指南

Choose ICL7650CPD+ for a new or legacy precision-signal design that uses a single 8 V supply, needs low offset drift, and is built around the Maxim ICL7650 family. ICL7650APD+ and ICL7650BPD+ are logical same-family candidates when the required offset limits and temperature grade match, while ICL7653CPD+ may fit closely related zero-drift requirements. Consider TC7650CPA or TLC2652CP when supply, offset, noise, stability, and lifecycle considerations favor a cross-brand part. A true drop-in decision requires more than the shared 14-pin PDIP outline: verify pin functions, nulling behavior, common-mode range, output swing, bandwidth, noise, and clock configuration against the official datasheets. For new dense mixed-signal products, compare the ICL7650CPD+ with modern surface-mount precision amplifiers and consider whether the legacy through-hole package remains the best mechanical choice.

與替代品比較

參數 本產品 ICL7650APD+ ICL7650BPD+ ICL7653CPD+ TC7650CPA TLC2652CP
Brand Maxim Integrated Maxim Integrated Maxim Integrated Maxim Integrated Microchip Technology Texas Instruments
Package PDIP-14 PDIP-14 PDIP-14 PDIP-14 PDIP-14 PDIP-14
Amplifier Type Chopper-stabilized zero-drift operational amplifier Zero-drift operational amplifier Chopper-stabilized operational amplifier Chopper-stabilized operational amplifier Operational amplifier Chopper-stabilized operational amplifier
Number of Circuits 1 circuit 1 circuit 1 circuit 1 circuit 1 circuit 1 circuit
Mounting Type Through-hole Through-hole Through-hole Through-hole Through-hole Through-hole

主要差異化特點

  • Direct continuation of the established Maxim ICL7650 precision-amplifier platform (對比TC7650CPA)
  • Zero-drift architecture designed for low-level precision measurements (對比TLC2652CP)
  • Same-brand family options simplify qualification of legacy designs (對比ICL7650BPD+)

設計說明

Keep the inverting and non-inverting input connections short, away from clock and power-switching traces, and route them over a continuous ground plane. For gain stages using large feedback resistors, use guarding or driven shielding where input-bias current can produce meaningful error. Place any input or feedback filtering capacitors directly at the relevant pins to minimize parasitic feedback and unwanted high-frequency behavior.

Do not assume that equal package dimensions guarantee equal behavior between chopper-stabilized amplifiers. Before substituting ICL7650APD+, ICL7650BPD+, ICL7653CPD+, TC7650CPA, or TLC2652CP, compare pin functions, supply limits, input common-mode range, output swing, offset, noise, gain-bandwidth product, and clock configuration. High closed-loop gain can amplify residual chopping artifacts or expose different settling behavior.

Use the manufacturer clock and nulling guidance when configuring the amplifier, especially at high gain or with long feedback paths. Stable operation depends on adequate phase margin and correct treatment of the compensation network. Validate the completed board with a slow large-signal sweep and a faster small-signal sweep because low offset does not by itself guarantee acceptable settling time, noise, or stability.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The ICL7650 family data-sheet identifies the device as a general-purpose precision operational amplifier. No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration is stated in the product information used for this page.

相關搜尋

icl7650cpd datasheet ICL7650CPD+ datasheet pdf ICL7650CPD+ pinout ICL7650CPD+ specifications ICL7650CPD+ equivalent ICL7650CPD+ replacement ICL7650CPD+ vs TC7650CPA ICL7650CPD+ vs TLC2652CP ICL7650CPD+ application circuit Maxim Integrated ICL7650CPD+ ICL7650CPD+ price ICL7650CPD+ stock

相關元件與詞彙

Maxim Integrated ICL7650CPD+ ICL7650APD+ ICL7650BPD+ ICL7653CPD+ TC7650CPA TLC2652CP operational amplifier chopper-stabilized amplifier zero-drift amplifier precision signal conditioning analog IC semiconductor PDIP-14 through-hole package single 8 V supply input offset voltage input bias current offset drift common-mode range gain-bandwidth product low-level sensor measurement bridge sensor transimpedance amplifier instrumentation amplifier
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情