ICS487G-25 - 48MHz Quad PLL Clock Generator | Renesas Electronics
MPN: ICS487G-25 ✗ 停產ICS487G-25 概覽
A phase-locked-loop clock generator is a timing IC that synchronizes an output frequency to a reference signal. The PLL architecture supports frequency generation or multiplication while distributing multiple clock phases or related outputs. Within the broader semiconductor hierarchy, this device is a clock and timing IC, a programmable logic device based on phase-locked-loop technology, and a system-level clock-generation component.
The ICS487G-25 is identified as a quad PLL for DTV, with a nominal operating frequency of 48 MHz. Its 3.135 V to 3.465 V supply range centers around a nominal 3.3 V rail, while the 16-TSSOP package provides a surface-mount footprint suitable for compact digital television and video-processing equipment. The device is supplied in a tube according to the manufacturer product listing.
The quad-output architecture can reduce the number of separate oscillator or buffer components needed when several related clocks are required. Because PLL outputs share a common frequency reference, they can provide repeatable phase relationships when configured correctly. Exact output frequencies, feedback ratios, jitter, operating temperature, and control-pin functions must be confirmed in the manufacturer datasheet before final circuit design.
Typical uses include digital television receiver and display electronics, video timing systems, set-top equipment, and other consumer or professional AV platforms operating from a 3.3 V rail. The device is particularly relevant where four related clock signals are needed close to a video processor, scaler, demodulator, or digital interface.
PCB implementation requires a low-inductance path between the device and its decoupling capacitor. Place the 3.3 V supply bypass capacitor close to the supply pin, keep clock routes short and controlled, and route other high-speed signals away from PLL inputs and outputs. Use the pin-description table in the manufacturer datasheet when assigning tracks and confirming the exposed or no-connect positions.
This page combines the 48 MHz operating point, 3.3 V supply range, 16-TSSOP packaging information, replacement analysis, and practical layout guidance in one engineering-focused reference. It is intended to accelerate initial circuit selection while directing design-critical details to the authoritative Renesas datasheet and layout guidance.
直接替換替代品,適用於 ICS487G-25 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
ICS487G-25LFT
✅ 直接替換📋 參考替代品(不在目錄中)
ICS487G-25T
✅ 直接替換📋 參考替代品(不在目錄中)
ICS487G-25 規格
| Device Type | Quad PLL for DTV |
| 功能 | Phase-locked-loop clock generator |
| Nominal Frequency | 48 MHz |
| Supply Voltage Range | 3.135 V to 3.465 V |
| Number of PLL Channels | 4 channels |
| 封裝 | 16-TSSOP |
| Package Width | 0.173 in (4.40 mm) |
| 安裝類型 | Surface Mount |
| Circuit Count | 1 circuit |
| Shipping Container | Tube |
| RoHS 狀態 | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
ICS487G-25 0.173 in (4.40 mm) 腳位配置指南
ICS487G-25(0.173 in (4.40 mm) 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: ICS487G-25.
請參閱 資料表 以查看完整腳位配置。
典型應用
ICS487G-25 適用於 6 應用s: Digital Television Receiver Timing, Video Processing Clock Distribution, Set-Top Box Clocking, Professional Video Equipment, Digital Video Interface Timing, Legacy AV Platform Maintenance.
Digital Television Receiver Timing
The ICS487G-25 fits digital television receiver timing because it is explicitly identified as a quad PLL for DTV and operates from a 3.135 V to 3.465 V supply. Its nominal 48 MHz operating point and four PLL outputs can support related timing signals near a video demodulator, processor, or interface. Using one clock-generation component can simplify distribution compared with several unrelated oscillators. Confirm the required feedback configuration and output phases in the Renesas datasheet before layout, and place the bypass capacitor close to the supply pin to limit supply noise at the PLL.
推薦
Video Processing Clock Distribution
The ICS487G-25 can support video-processing clock distribution when the system requires several related signals derived from a common PLL reference. Its quad architecture provides four outputs, while the nominal 48 MHz frequency aligns with the timing requirements of many DTV signal paths. The 16-TSSOP package keeps the device compact and surface-mountable for processor boards. Keep each clock route short, avoid routing beneath unrelated noisy signals, and use the pin-description table to identify output and feedback connections.
推薦
Set-Top Box Clocking
The ICS487G-25 is applicable in a 3.3 V set-top box or television front end that needs multiple coherent clock outputs for demodulation and video processing. Its 3.135 V to 3.465 V operating range is centered on the nominal 3.3 V rail, and its four PLL outputs can reduce the number of discrete clock sources. The main tradeoff is its legacy catalog position, so procurement should confirm lifecycle status and sourcing continuity. During layout, isolate the clock network from switching supplies and switching-node traces.
推薦
Professional Video Equipment
The ICS487G-25 can serve as the PLL clock generator in professional video equipment that operates around 3.3 V and requires stable relationships among multiple timing outputs. Its nominal 48 MHz frequency and quad configuration suit DTV-oriented signal chains, including scaling, synchronization, and format-processing stages. The device does not eliminate the need for careful reference and feedback routing, so use controlled-impedance clock traces and verify acquisition behavior in the assembled system. Confirm output jitter and phase specifications against the manufacturer datasheet.
推薦
Digital Video Interface Timing
The ICS487G-25 is relevant where a digital video interface requires several related clocks derived from a common PLL rather than independently generated signals. The 48 MHz nominal operating point can support legacy DTV timing networks, while the 16-TSSOP package allows placement near the destination device. Route clock outputs directly to their loads, minimize stubs, and keep them separated from high-current switching paths. The 3.3 V supply connection should be decoupled locally, and all configuration pins must be assigned according to the authoritative pin table.
推薦
Legacy AV Platform Maintenance
The ICS487G-25 is especially useful when repairing or sustaining an older AV platform whose original design used this quad DTV PLL. Because ICS487G-25LFT is described as having consistent terminals, package, performance parameters, and functional characteristics, it can support board-level maintenance without a layout revision. A successful substitution still requires checking device markings, supply conditions, configuration straps, and production packing. Bring-up testing should confirm PLL lock and correct timing relationships before reconnecting the board to downstream video circuitry.
推薦
推薦產品摘要
工程參考資料,適用於 ICS487G-25 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | ICS487G-25LFT | ICS487G-25T |
|---|---|---|---|
| Package | 16-TSSOP | 16-TSSOP - same | 16-TSSOP - same |
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Device Type | Quad PLL for DTV | Quad PLL for DTV | Clock generator |
| Nominal Frequency | 48 MHz | 48 MHz | 48 MHz |
| Supply Voltage Range | 3.135 V to 3.465 V | 3.135 V to 3.465 V | 3.135 V to 3.465 V |
| PLL Output Count | 4 outputs | 4 outputs | 4 outputs |
| Mounting Type | Surface Mount | Surface Mount | Surface Mount |
| Package Width | 0.173 in (4.40 mm) | 0.173 in (4.40 mm) | 0.173 in (4.40 mm) |
| Special Features | DTV quad PLL clock generation | Consistent terminals and functional characteristics | Same-family shipping suffix |
主要差異化特點
- Documented terminal and functional consistency (對比ICS487G-25LFT)
- Identical core clock specifications (對比ICS487G-25T)
- Original tube-packed catalog option (對比ICS487G-25T)
設計說明
Place the local 3.3 V bypass capacitor directly beside the ICS487G-25 supply and ground pins, and use the shortest practical connection. PLL clocking circuits are sensitive to supply disturbance, so excessive loop area on the decoupling path can allow switching noise to modulate the generated clock. Follow the capacitor value and placement recommendation in the manufacturer application guidance.
The Renesas layout guidance recommends keeping components on one side of the board where possible, minimizing vias through other signal layers, and routing other signals away from the ICS487-25. Keep clock traces short, avoid stubs, and separate feedback and output routes from switching-node traces. This is especially important when the generated clock feeds high-resolution or low-jitter video-processing circuitry.
Do not substitute an ICS487G suffix based only on its 16-TSSOP outline. Confirm the exact output configuration, feedback arrangement, electrical limits, operating-temperature grade, lifecycle status, and production packing before approving a replacement. For board maintenance, verify PLL lock and all four output relationships at the equipment level because a mechanically compatible part can still differ in configuration or qualification.
合規資訊
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were identified for the exact device.