Renesas Electronics

ICS728MT - 27MHz VCXO/PLL Clock Generator | Renesas

MPN: ICS728MT ✓ 啟用中
3.15 V to 3.45 V Vdss 8-SOIC Package Crystal Speed
MOQ: 1 |

ICS728MT 概覽

The Renesas ICS728MT is a 27 MHz voltage-controlled crystal oscillator with an integrated phase-locked-loop frequency doubler, supplied in an 8-pin SOIC surface-mount package. Its specified 3.3 V operating supply range is 3.15 V to 3.45 V, while the circuit combines VCXO frequency control and PLL multiplication in one clock-generation device. The nominal input is a crystal, and the output is a clock signal with a stated input-to-output ratio of 2:1.

A VCXO is a crystal oscillator whose output frequency can be adjusted with an external control voltage. A PLL, or phase-locked loop, locks a controlled oscillator to a reference frequency and can multiply that frequency. The ICS728 combines these functions into a single IC, allowing a system to derive a stable 27 MHz clock from an external crystal while retaining voltage-based frequency trimming. In the clock-generation hierarchy, the ICS728MT belongs to the voltage-controlled oscillator and clock-generator class of clock and timing integrated circuits.

The principal operating features are the 27 MHz maximum frequency, one clock circuit, 2:1 input-to-output ratio, crystal input, clock output, and integrated PLL. These characteristics make the device suitable for frequency control, reference-clock synthesis, communications equipment, test and measurement systems, and digital subsystems requiring a locally adjustable clock. Its 3.3 V supply requirement also aligns it with modern low-voltage digital platforms.

Technically, the IC separates reference generation from output multiplication. The crystal establishes the frequency reference, while the VCXO control input permits fine tuning of the oscillator. The PLL stage provides the frequency-doubling function needed to reach the 27 MHz operating point. This topology can simplify clock trees by reducing the number of separate oscillator and multiplier packages, although loop stability, control-voltage range, output jitter, and crystal startup behavior remain important qualification items.

Typical implementations include telecommunications clock trees, instrumentation timing, industrial control systems, embedded data-acquisition equipment, and communication transceivers requiring a stable reference clock. The external crystal and any PLL loop components should be selected with the manufacturer’s reference circuit and layout guidance to preserve frequency accuracy and startup reliability.

A key design consideration is the distinction between a nominal 27 MHz output and the tolerance of the complete clock system. Crystal accuracy, VCXO control voltage, PLL loop design, temperature drift, and power-supply noise can all affect the final output. PCB layout should keep the crystal path short and isolate the control and supply paths from sensitive analog or high-speed digital routing.

This page consolidates the device function, operating limits, package information, application guidance, and design considerations into an engineering-focused reference. It also distinguishes verified device characteristics from parameters that require confirmation in the manufacturer datasheet before a new design is released for production.

直接替換替代品,適用於 ICS728MT — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此產品無可直接替換的替代品。

申請替代品

ICS728MT 規格

Device Type Voltage Controlled Crystal Oscillator (VCXO)
PLL Yes
Clock Input Crystal
Clock Output Clock
Maximum Frequency 27 MHz
Number of Circuits 1
Input-to-Output Ratio 2:1
Supply Voltage Range 3.15 V to 3.45 V
Nominal Supply Voltage 3.3 V
輸出類型 Clock
封裝 8-SOIC
Package Body Width 3.90 mm
安裝類型 Surface mount
Shipping Package Tape and reel (TR)

ICS728MT tape and reel (tr) 腳位配置指南

ICS728MT(tape and reel (tr) 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。

ICS728MT 的 tape and reel (tr) 封裝腳位圖

無詳細腳位定義資料: ICS728MT.

請參閱 資料表 以查看完整腳位配置。

典型應用

ICS728MT 適用於 6 應用s: Telecommunications Reference Clock, Industrial Control Clock Tree, Test and Measurement Instrumentation, Communication Transceiver Timing, Data Acquisition Module, Precision Digital Control.

🌐

Telecommunications Reference Clock

The ICS728MT is appropriate for a 3.3 V telecommunications reference-clock stage requiring a tunable oscillator and integrated frequency multiplication. Its 27 MHz maximum frequency, crystal input, clock output, and 2:1 input-to-output ratio provide a defined architecture for clock-tree generation. The external control voltage can support calibration or compensation when the system needs more than a fixed crystal frequency. Designers should use the manufacturer application circuit to choose the crystal, loop components, and grounding arrangement, then verify startup, tuning range, jitter, and phase noise across the intended channel bandwidth.

🏭

Industrial Control Clock Tree

The ICS728MT can supply a locally adjustable clock for industrial controllers, data-acquisition modules, and embedded control equipment. Its single-circuit implementation combines a crystal reference, voltage-controlled oscillator, and 2:1 multiplier within one 8-SOIC device, reducing the number of separate clock packages. Operating from 3.15 V to 3.45 V suits 3.3 V logic domains, while the control input allows production calibration. In a long-life industrial environment, validate temperature stability, aging behavior, supply-noise sensitivity, and restart performance before integrating the oscillator into a safety- or mission-critical control loop.

🔧

Test and Measurement Instrumentation

The ICS728MT fits clock-generation blocks in instruments that require a stable reference with production or system-level frequency adjustment. The 27 MHz output ceiling, integrated PLL, and 2:1 ratio provide a compact way to derive the operating clock from an external crystal. Voltage tuning can compensate for calibration offsets or support intentional frequency offsets in measurement systems. The design must still preserve short crystal paths, careful grounding, and controlled supply decoupling. For high-accuracy instruments, compare the complete clock specification with the analyzer or converter requirements, especially jitter, phase noise, temperature drift, and reference-to-output isolation.

📡

Communication Transceiver Timing

The ICS728MT can provide the local timing reference used by communication transceivers and digital interface subsystems operating from a 3.3 V supply. Combining a VCXO with PLL multiplication allows a design to retain voltage-based calibration while generating the required clock relationship. The 8-SOIC surface-mount package supports compact assembly, and the nominal 27 MHz capability is well suited to many legacy communication architectures. Integration should account for isolation from switching regulators and high-speed data lines. Confirm output rise time, jitter, tuning sensitivity, and phase-noise performance against the transceiver specification before release.

📊

Data Acquisition Module

The ICS728MT is suitable for data-acquisition modules requiring a common clock alongside analog-to-digital conversion, digital processing, or communications. A crystal-based VCXO establishes a stable reference, the 2:1 PLL relationship provides the stated multiplication path, and the control voltage permits board-level trimming. The single 8-SOIC implementation can simplify clock distribution in compact multi-channel systems. For acquisition accuracy, minimize coupling from ADC reference and driver circuits into the oscillator, maintain a quiet supply path, and evaluate clock jitter against the acquisition bandwidth and sampling architecture. The selected crystal and loop components should follow the manufacturer reference configuration.

⚡

Precision Digital Control

The ICS728MT can serve compact digital-control modules that benefit from a calibratable clock rather than a fixed-frequency oscillator. The VCXO control input permits system-level frequency adjustment, while the integrated PLL doubles the reference relationship to support a nominal 27 MHz operating clock. Its 3.3 V supply range and 8-SOIC package fit established controller boards. Use the control voltage strictly within the device’s documented operating range and avoid routing it beside switching power stages. For production control systems, characterize frequency offset across temperature and supply conditions, confirm oscillator startup after power cycling, and reserve calibration margin for component aging and board-level effects.

What is the ICS728MT?
The ICS728MT is a 27 MHz voltage-controlled crystal oscillator with an integrated PLL frequency doubler. According to the manufacturer datasheet, it accepts a crystal input, produces a clock output, and combines VCXO frequency control with 2:1 frequency multiplication in one 8-pin SOIC package. The device operates from a 3.15 V to 3.45 V supply and is intended for 3.3 V clock-generation systems.
What are the key specifications of ICS728MT?
The ICS728MT supports a maximum frequency of 27 MHz, includes one clock circuit, and provides a 2:1 input-to-output ratio. The manufacturer datasheet identifies a crystal input, clock output, integrated PLL, and 3.15 V to 3.45 V operating range. Its 8-SOIC surface-mount package supports compact implementation in communication, instrumentation, and control equipment.
What is the operating voltage of ICS728MT?
The ICS728MT operates from 3.15 V to 3.45 V, with 3.3 V as the nominal supply level. This range matches the device description in the manufacturer datasheet and allows use with 3.3 V digital systems. Decoupling and power-layout requirements should follow the application guidance in the datasheet to prevent supply noise from affecting clock quality.
Where can I download the ICS728MT datasheet PDF?
The ICS728MT datasheet is available through the datasheet link on this page and through the listed Octopart datasheet entry. Use the manufacturer document to confirm the complete pin description, electrical characteristics, recommended crystal circuit, control-voltage range, and layout guidance before releasing a PCB. The public product description identifies the part as a 27 MHz VCXO with an integrated PLL.
Where can I find the ICS728MT pinout?
The ICS728MT pin assignment is defined in the manufacturer datasheet for its 8-SOIC package. Use the pin-description table and package drawing when assigning the crystal, supply, ground, control-voltage, and clock-output connections. No complete public pin table can be reproduced safely without the manufacturer pin description, so consult the datasheet rather than inferring connections from package position.
How does the ICS728MT VCXO and PLL combination work?
The ICS728MT uses an external crystal as the frequency reference and a voltage-controlled oscillator to support fine frequency adjustment. Its integrated PLL provides the stated 2:1 multiplication function used to produce the nominal 27 MHz clock output. The control voltage, crystal parameters, and PLL loop determine how precisely the external circuit can tune and stabilize the final output.
Is the ICS728MT suitable for a 3.3 V communication clock tree?
The ICS728MT is suitable for a 3.3 V communication clock tree when the reference clock requires crystal-based generation, voltage tuning, and frequency multiplication. Its specified 3.15 V to 3.45 V supply range, 27 MHz maximum frequency, and 2:1 ratio align with many communications and data-acquisition designs. Validate jitter, phase-noise, startup, and tuning requirements against the complete system specification.
What is the best drop-in replacement for ICS728MT?
No confirmed drop-in replacement is established for the ICS728MT from the available cross-reference results. A valid replacement must use the same 8-SOIC footprint, preserve pin-to-pin connections, operate from 3.15 V to 3.45 V, provide a 27 MHz maximum output, and maintain the 2:1 frequency relationship. Confirm those requirements before treating any similarly described oscillator as a drop-in alternative.
Can another VCXO replace the ICS728MT without PCB changes?
A different VCXO can replace the ICS728MT only after its pinout, package, supply range, control-voltage behavior, crystal interface, and output frequency have been verified. Matching the SOIC-8 package alone is insufficient because VCXO control and PLL connections may differ. Use the manufacturer pin table and application circuit for the original device as the acceptance checklist for any proposed replacement.
What can replace the ICS728MT?
The closest replacement is a 27 MHz VCXO/PLL device with the same 8-SOIC pinout, 3.15 V to 3.45 V supply range, crystal input, 2:1 multiplication, and compatible output interface. No verified alternative MPN is currently identified, so a component should not be called a direct replacement without a documented pin-for-pin comparison. An equivalent function may instead require a board-level redesign.
When should I choose ICS728MT over a fixed-frequency crystal oscillator?
Choose the ICS728MT when the clock must be tunable after manufacture or corrected for system-level frequency variation. Its VCXO control path allows voltage-based adjustment, while the integrated PLL supports 2:1 multiplication. A fixed-frequency oscillator is simpler when no calibration or fine tuning is required, but it cannot provide the same adjustable operating point through the VCXO control input.
What is the difference between a VCXO and a PLL?
A VCXO varies its output frequency in response to a control voltage, while a PLL locks a controlled oscillator to a reference and may multiply the reference frequency. The ICS728MT integrates both functions with an external crystal reference. Its datasheet identifies a 2:1 input-to-output ratio and a maximum frequency of 27 MHz.
Where can I buy ICS728MT online?
Use the Request a Quote form on this page to request current ICS728MT availability, lot conditions, and delivery terms. The Request a Quote workflow also allows the buyer to state required quantities and packaging preferences. Current price and stock should be confirmed through the quotation process because market conditions and inventory can change.
What is the price of ICS728MT?
The current price of ICS728MT is handled through the Request a Quote form on this page. Submit the required quantity and packaging requirements to receive a current quotation. The form is the appropriate channel for price confirmation because market pricing and supply availability can change after the product data is published.
What is the lead time and stock status of ICS728MT?
Current stock status and lead time for ICS728MT should be confirmed through the Request a Quote form on this page. Include the required quantity, date code preference, and tape-and-reel packaging requirement in the request. The product is supplied in an 8-SOIC tape-and-reel configuration, but an order confirmation is required for allocation and delivery scheduling.
Is ICS728MT compliant with RoHS and REACH?
The RoHS and REACH status of ICS728MT must be confirmed from the current manufacturer declaration or material-compliance documentation. The available product description identifies the part and its package but does not state these compliance results. Do not infer compliance solely from the presence of an 8-SOIC package or from its market availability.
What PCB layout practices are important for ICS728MT?
Keep the crystal and its connected traces short, preserve a continuous ground reference, and route the VCXO control and clock-output paths away from noisy switching nodes. Follow the manufacturer reference circuit for component values and grounding. Because the ICS728MT combines a crystal reference with PLL multiplication, layout changes can affect startup, tuning stability, and output phase noise.

工程參考資料,適用於 ICS728MT — 比較、設計指引及合規資訊。

選型指南

Choose the ICS728MT when a 3.3 V system needs a 27 MHz crystal-based clock with voltage tuning and integrated 2:1 multiplication. It is particularly useful when production calibration, system-level frequency correction, or consolidation of a VCXO and frequency multiplier into one 8-SOIC package is required. A fixed-frequency oscillator is simpler when no tuning is needed, while a separate PLL may provide more flexibility in multiplication ratio, divider configuration, or loop control. A different VCXO should be considered only after its package, pinout, supply voltage, crystal interface, tuning range, and output behavior are shown to match the original circuit. No confirmed drop-in alternative is identified, so engineers requiring a second source should perform their own pin-for-pin and timing qualification or consider a deliberate redesign using a modern clock-generation family.

與替代品比較

參數 本產品
Brand Renesas Electronics
Package 8-SOIC
Device Type VCXO with integrated PLL
Maximum Frequency 27 MHz
Supply Voltage Range 3.15 V to 3.45 V
Input-to-Output Ratio 2:1
Number of Circuits 1
Clock Input Crystal
Output Clock
Mounting Type Surface mount

設計說明

Keep the external crystal and oscillator tracks short, continuous, and surrounded by an uninterrupted ground plane. Route the VCXO control voltage away from switching nodes and high-current power paths. The 8-SOIC footprint should use the manufacturer’s recommended ground and decoupling connections; deviations in return-current paths can add noise to the control input and reduce confidence in the clock’s tuning behavior.

Place the crystal and its load components close to the ICS728MT and terminate sensitive oscillator nodes without long test pads or exposed stubs. Keep supply bypass capacitance at the device pins and use a quiet supply path where possible. Confirm all component values against the manufacturer reference circuit before PCB release, since crystal load capacitance and loop components directly influence startup and frequency accuracy.

Treat the clock output as a timing signal even though the ICS728MT generates it from an analog-controlled crystal reference. Use a short point-to-point route from the device to the first clock receiver, provide a continuous return path, and avoid splitting the output near the package. Validate edge rate, jitter, and spurious content with the final receiver and load configuration rather than relying on nominal frequency alone.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

Compliance status must be confirmed from the current manufacturer declarations or material-compliance documentation.

資料驗證日期: 2026-11-11 — 資料由 XAIPART 元件工程團隊驗證及整理

相關搜尋

ICS728MT datasheet ICS728MT specifications ICS728MT pinout ICS728MT datasheet pdf ICS728MT equivalent ICS728MT replacement ICS728MT cross reference ICS728MT 27MHz VCXO ICS728MT 3.3V clock generator ICS728MT SOIC-8 footprint ICS728MT application circuit ICS728MT price ICS728MT stock Renesas ICS728MT ICS728MT frequency doubler

相關元件與詞彙

Renesas Electronics ICS728MT VCXO voltage-controlled crystal oscillator PLL phase-locked loop frequency doubler clock generator clock and timing IC crystal oscillator 27 MHz 2:1 frequency ratio 3.3 V supply 8-SOIC SOIC family surface-mount package SMD clock output control voltage frequency stability output jitter phase noise RoHS REACH AEC-Q100
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情