KSZ8091MLXCA - 10/100 Ethernet PHY | Microchip Technology
MPN: KSZ8091MLXCA ✓ 啟用中KSZ8091MLXCA 概覽
An Ethernet PHY is the physical-layer component within an Ethernet communication system. It converts logical data into signals suitable for twisted-pair wiring and converts incoming cable signals into data that a host controller can process. The PHY therefore sits between a network media interface and an Ethernet MAC, forming part of the broader Ethernet interface IC and communication semiconductor hierarchy.
The KSZ8091MLXCA combines 10BASE-T and 100BASE-TX operation in one highly integrated device. Its single-supply architecture simplifies power planning, while Wake-on-LAN support allows a powered network system to detect remote activation. LinkMD provides cable-diagnostic functions that can help identify wiring faults and improve field maintenance of installed CAT-5 networks.
Integration matters because a 48-pin LQFP package consolidates the physical-layer transceiver and associated interface functions into a surface-mount footprint. This supports compact Ethernet equipment while reducing the number of separate network-interface components. The package is intended for automated surface-mount assembly, although exact PCB land-pattern and thermal details should be taken directly from the manufacturer pin description and recommended land pattern.
Typical uses include industrial controllers, embedded network equipment, access hardware, communications modules, and compact embedded systems that require 10-Mb/s or 100-Mb/s Ethernet over copper cabling. The device is also appropriate where Wake-on-LAN is valuable for remote management or restart behavior and where LinkMD assists installation and maintenance diagnostics.
A key design consideration is that the host system must supply suitable bypass capacitance, a stable single-supply rail, and a correctly implemented magnetics or RJ-interface network path. Differential routing should be short and symmetric, while the unused Ethernet pins must follow the manufacturer connection guidance rather than being treated as generic no-connect pins.
This product page combines the manufacturer product information, package identification, replacement guidance, application analysis, and design cautions needed to evaluate the KSZ8091MLXCA before it is assigned to a 10/100BASE-T network design.
直接替換替代品,適用於 KSZ8091MLXCA — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: KSZ8091MLXCA (相同外形與佔位) — 差異在於 Package.
KSZ8091MLXIA
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →KSZ8081MLXCA
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →KSZ8081MLIA
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
KSZ8091MLXCA 規格
| Product Type | 10BASE-T/100BASE-TX Ethernet physical-layer transceiver |
| Supported Data Rates | 10 Mb/s and 100 Mb/s |
| Cable Support | CAT-5 unshielded twisted-pair cable |
| Supply Architecture | Single supply |
| Wake-on-LAN Support | Yes |
| LinkMD Cable Diagnostics | Yes |
| 封裝 | 48-pin LQFP, 7 x 7 mm |
| 腳位數 | 48 pins |
| 安裝類型 | Surface mount |
KSZ8091MLXCA 48-pin lqfp, 7 x 7 mm 腳位配置指南
KSZ8091MLXCA(48-pin lqfp, 7 x 7 mm 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: KSZ8091MLXCA.
請參閱 資料表 以查看完整腳位配置。
典型應用
KSZ8091MLXCA 適用於 6 應用s: Industrial Ethernet Controllers, Embedded Communications Equipment, Network Access Equipment, Remote Management Systems, Security and Surveillance Endpoints, Field-Serviceable Network Products.
Industrial Ethernet Controllers
The KSZ8091MLXCA fits industrial controllers that need a compact 10/100 Mb/s copper-network interface. Its single-supply 10BASE-T/100BASE-TX PHY avoids a separate multi-rail interface arrangement, while Wake-on-LAN can support remote activation and service access. LinkMD adds value during installation and maintenance by helping identify cable faults. In an industrial product, engineers should still verify operating temperature, supply limits, isolation strategy, and grounding before approving the device for the final equipment class.
推薦
Embedded Communications Equipment
The KSZ8091MLXCA is appropriate for embedded communications equipment that connects a host processor or controller to a 10/100 Mb/s copper network. It handles the physical layer over CAT-5 UTP while leaving higher-layer Ethernet processing to the host controller. The integrated combination of 10BASE-T and 100BASE-TX supports both legacy and fast-Ethernet links. Wake-on-LAN is useful in unattended equipment, and LinkMD can help commissioning teams investigate installation or field-cable problems.
推薦
Network Access Equipment
Access terminals, serial-to-network gateways, and communication modules can use the KSZ8091MLXCA as a single-chip physical layer for CAT-5 copper links. The 48-pin 7 x 7 mm LQFP package supports compact surface-mount assemblies, and single-supply operation simplifies the power tree around the network interface. For deployed equipment, Wake-on-LAN provides remote wake behavior while LinkMD assists troubleshooting. Designers should account for the external magnetics or network-interface components and the exact differential-pair layout specified by Microchip.
推薦
Remote Management Systems
The KSZ8091MLXCA supports remote-management designs because Wake-on-LAN can allow compatible equipment to react to network activity without continuous local interaction. The PHY operates at 10 Mb/s or 100 Mb/s over standard CAT-5 UTP, making it practical for management ports on industrial, commercial, and embedded systems. LinkMD complements remote operation by helping identify cable or connection faults. Firmware and host hardware must implement the required Wake-on-LAN signaling and diagnostic interpretation according to the manufacturer documentation.
推薦
Security and Surveillance Endpoints
KSZ8091MLXCA-based endpoints can connect cameras, access-control units, and other security hardware to a 10/100 Mb/s Ethernet infrastructure. Its CAT-5 UTP support aligns with common indoor building cabling, while the small 7 x 7 mm LQFP footprint supports compact electronics. Wake-on-LAN can assist centralized reboot workflows when supported by the endpoint, and LinkMD can help installers identify cabling faults. For powered devices such as cameras, system designers should evaluate total power use and thermal performance under the selected network activity.
推薦
Field-Serviceable Network Products
The KSZ8091MLXCA is useful in field-serviceable products because LinkMD can assist technicians with cable diagnostics during installation or maintenance. The device combines 10BASE-T and 100BASE-TX support, Wake-on-LAN, and a single-supply architecture in one 48-pin LQFP package. This reduces the number of separate physical-layer components in a copper-network product and helps standardize the interface across related equipment. Confirm the exact diagnostic workflow, error reporting, and temperature limits in the manufacturer documentation before enabling it as a customer-facing maintenance feature.
推薦
推薦產品摘要
工程參考資料,適用於 KSZ8091MLXCA — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | KSZ8091MLXIA | KSZ8081MLXCA | KSZ8081MLIA |
|---|---|---|---|---|
| Package | 48-LQFP (7x7) | 48-LQFP (7x7) | 48-LQFP (7x7) | 48-LQFP (7x7) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Product Type | 10BASE-T/100BASE-TX Ethernet PHY | 10BASE-T/100BASE-TX Ethernet PHY | 10BASE-T/100BASE-TX Ethernet PHY | 10BASE-T/100BASE-TX Ethernet PHY |
| Supported Data Rates | 10 Mb/s and 100 Mb/s | 10 Mb/s and 100 Mb/s | 10 Mb/s and 100 Mb/s | 10 Mb/s and 100 Mb/s |
| Cable Support | CAT-5 UTP | CAT-5 UTP | CAT-5 UTP | CAT-5 UTP |
| Pin Count | 48 pins | 48 pins | 48 pins | 48 pins |
主要差異化特點
- Documented management features in one Ethernet PHY (對比KSZ8081MLXCA)
- Single-supply 10/100BASE-TX interface integration (對比KSZ8091MLXIA)
- Standard 48-pin surface-mount footprint (對比KSZ8081MLIA)
設計說明
Use the manufacturer recommended 48-LQFP land pattern rather than a generic 48-pin footprint. Ethernet differential pairs should be routed as short, symmetric, continuously referenced traces with minimal stubs, and the placement of the PHY, magnetics, and connector should follow the reference circuit. Maintain the specified spacing and via geometry around the network interface to reduce reflections and radiated emissions.
The KSZ8091 is a single-supply device, but the system still needs a quiet rail capable of supporting Ethernet transmitter activity. Place the manufacturer-recommended bypass capacitors close to the supply and ground pins, provide adequate via connections to the supply planes, and avoid sharing high-current return paths beneath sensitive network circuitry. Validate startup, idle, and maximum-traffic supply ripple at the device pins.
Assign every physical pin from the manufacturer pin-description table. Do not infer unused or no-connect terminals solely from the 48-pin package size, because configuration straps, clock, interrupt, reset, and test functions can be sensitive to the exact pinout. After programming the PHY, confirm the strap and register configuration through the host interface, and test link negotiation at both 10 Mb/s and 100 Mb/s.
A shared 48-LQFP footprint does not prove that every KSZ8091-family ordering code is interchangeable. Review Wake-on-LAN, LinkMD, temperature class, supply limits, reset behavior, register compatibility, and magnetic-interface requirements before approving a substitution. The KSZ8091MLXCA-TR is primarily a tape-and-reel ordering variant and should not be presented as a different functional alternative.
合規資訊
The product page identifies the KSZ8091 as a 10BASE-T/100BASE-TX Ethernet PHY but does not provide an explicit compliance statement for this ordering code.