LC4064V-10T48I - 64-Macrocell 125MHz CPLD | Lattice
MPN: LC4064V-10T48I ✓ 啟用中LC4064V-10T48I 概覽
A CPLD is a programmable-logic semiconductor that combines programmable AND/OR logic structures with nonvolatile configuration memory. In the product hierarchy, this device belongs to the ispMACH 4000V family of complex programmable logic devices. Compared with discrete programmable logic arrays, a CPLD provides denser integration, repeatable timing, and a unified configuration architecture. Its 64 macrocells make it suitable for consolidating control, interface, decode, and state-machine logic into one device.
Key features include 64 macrocells organized into four logic blocks, 32 user I/O pins, a 125 MHz maximum frequency, and 10 ns propagation delay. The device also provides in-system programmability, allowing a programmed configuration to be updated through the system programming interface without removing the package from the PCB. Its 48-pin TQFP format is suitable for conventional surface-mount assembly and prototype or production boards requiring a moderate pin count.
The ispMACH 4000 architecture is designed for predictable logic implementation, especially where several glue-logic functions must operate together at defined clock rates. The family documentation states that different density devices in the same package are designed to maintain the same pinout, supporting design migration between density options. This architecture makes the LC4064V useful when a design needs more integration than basic PAL devices while retaining nonvolatile, deterministic configuration behavior.
Typical uses include industrial control and data-acquisition modules, communication interfaces, test and measurement equipment, embedded system peripheral consolidation, and compact instrumentation requiring programmable logic. The device can implement bus decoding, state machines, protocol bridges, counter and timer logic, and control functions while keeping the external processor focused on its primary application tasks.
PCB design should preserve the device power and ground connectivity, provide the required bypass capacitance near the supply pins, and route programming signals away from high-speed switching nodes. Designers should also account for the 10 ns speed grade and the 125 MHz frequency ceiling when defining timing constraints, while confirming that every external interface operates within the selected I/O voltage range.
This product page combines the device's electrical identity, package details, migration alternatives, comparison parameters, and practical implementation guidance. It also highlights the distinctions between speed grades and package variants so engineers can identify a genuine drop-in option without confusing a functional substitute with a PCB-compatible replacement.
直接替換替代品,適用於 LC4064V-10T48I — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: LC4064V-10T48I (相同外形與佔位) — 差異在於 Package Type, Core Supply Voltage, Device Family, Device Type, Supported Family Supply Voltages.
LC4064V-10TN48I
✅ 直接替換📋 參考替代品(不在目錄中)
LC4064C-10T48I
✅ 直接替換聯絡詢價
查看資料表 →LC4064ZE-7TN48C
✅ 直接替換📋 參考替代品(不在目錄中)
LC4064V-10T48I 最大額定值與電氣特性
| Product Type | Complex Programmable Logic Device (CPLD) |
| Device Family | ispMACH 4000V |
| Macrocell Count | 64 macrocells |
| Logic Block Count | 4 logic blocks |
| Maximum Frequency | 125 MHz |
| Propagation Delay | 10 ns |
| Core Supply Voltage | 3.0 V to 3.6 V |
| Supported I/O Voltages | 3.3 V, 2.5 V, and 1.8 V |
| User I/O Pins | 32 pins |
| 封裝 | 48-pin TQFP |
| Package Type | Tray |
| Programming | In-system programmable |
| 工作溫度 | -40°C to +105°C |
| 安裝類型 | Surface mount |
| RoHS 狀態 | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
LC4064V-10T48I tray 腳位配置指南
LC4064V-10T48I(tray 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: LC4064V-10T48I.
請參閱 資料表 以查看完整腳位配置。
典型應用
LC4064V-10T48I 適用於 6 應用s: Industrial Control Logic, Communication Interface Consolidation, Data-Acquisition Module, Test and Measurement Equipment, Embedded Peripheral Bridge, LED Display and Panel Control.
Industrial Control Logic
The LC4064V-10T48I fits centralized industrial control blocks that require deterministic combinational and sequential logic. Its 64 macrocells and four logic blocks can consolidate motor-step sequencing, interlock logic, sensor decoding, fault latches, and command registers that would otherwise occupy multiple discrete devices. The 10 ns propagation-delay grade and 125 MHz maximum frequency provide margin for common control and status logic. Its industrial temperature range of -40°C to +105°C supports equipment deployed in factories, process controls, and automated machines. In-system programmability also allows configuration revision without removing the device from the assembled board.
推薦
Communication Interface Consolidation
The LC4064V-10T48I can consolidate protocol framing, command decoding, byte alignment, and peripheral interface control into a single programmable logic device. With 32 user I/O pins and 125 MHz maximum operating frequency, it is appropriate for moderate-rate interfaces and glue logic surrounding a host processor. Support for 3.3 V, 2.5 V, and 1.8 V interfaces allows logic to bridge mixed-voltage sections when the selected pin configuration and board topology support that arrangement. Engineers should use the timing models and I/O standard settings for every external signal rather than assuming identical behavior across all pins.
推薦
Data-Acquisition Module
The LC4064V-10T48I is useful in acquisition modules for address decoding, channel sequencing, strobe generation, data capture control, and buffer management. Its four logic blocks and 64 macrocells provide enough parallel structure to implement a small state machine alongside combinational decoding. The 10 ns device grade supports common control paths operating well below the 125 MHz family ceiling, while the 48-pin TQFP package simplifies routing to external sensors and converters. For analog front ends, keep sensitive data and reference paths away from programming and high-current switching activity, and follow the manufacturer power and decoupling guidance.
推薦
Test and Measurement Equipment
Instrumentation designs can use the LC4064V-10T48I for sequencer control, trigger routing, status decoding, and fixed-format test logic. The 64-macrocell capacity allows multiple timing and control functions to share one device, reducing board partitioning compared with separate small PLDs. A maximum frequency of 125 MHz provides a practical ceiling for high-speed digital coordination, although sensitive analog and reference circuitry must remain physically isolated from digital switching activity. The device's in-system programmability is particularly useful for configurable test platforms whose sequencing logic can be updated according to the instrument mode or calibration workflow.
推薦
Embedded Peripheral Bridge
The LC4064V-10T48I can bridge a processor to legacy or application-specific peripherals by implementing address decode, register mapping, interrupt control, and data-format conversion. Its 32 user I/O pins allow several peripheral signals to be handled without multiplying discrete glue-logic packages, while the programmable architecture supports revision of the interface map. The 3.0 V to 3.6 V core range and selectable 3.3 V, 2.5 V, or 1.8 V interface technologies assist system partitioning. Design sign-off should include timing closure for the slowest supported processor cycle, contention checks, and verification of every power-up state.
推薦
LED Display and Panel Control
The LC4064V-10T48I can control display scanning, keypad scanning, debouncing, brightness-command decoding, and status indication in compact embedded panels. Its 64 macrocells are well matched to repeated parallel logic and small state machines, while the 48-pin TQFP package provides enough I/O for multiple display and control signals. The 125 MHz maximum frequency leaves substantial timing margin for scan-rate generation and synchronized output updates. Because display systems can contain high-current LED drivers and switching converters, route the CPLD's supply return carefully and place bypass capacitors near the device to limit conducted and radiated noise.
推薦
推薦產品摘要
工程參考資料,適用於 LC4064V-10T48I — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | LC4064V-10TN48I | LC4064C-10T48I | LC4064ZE-7TN48C |
|---|---|---|---|---|
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Package | 48-pin TQFP | 48-pin TQFP | 48-pin TQFP | 48-pin TQFP |
| Propagation Delay | 10 ns | 10 ns | 10 ns | 7 ns |
| Temperature Grade | Industrial, -40°C to +105°C | Industrial | Industrial | Commercial |
主要差異化特點
- Industrial 10 ns grade in the established 4000V family (對比LC4064ZE-7TN48C)
- Directly documented 64-macrocell configuration (對比LC4064C-10T48I)
- Closest ordering-code candidate within the same 48-pin class (對比LC4064V-10TN48I)
設計說明
Place the required bypass capacitors adjacent to the LC4064V-10T48I power and ground pins, and provide a low-impedance return path from every ground connection. Follow the manufacturer pin-description table and recommended-layout diagrams when assigning the 48-pin TQFP footprint. Because exact pin names were not reproduced in the accessible technical listing, use the device datasheet as the controlling source for programming, clock, supply, ground, and user I/O assignments rather than inferring them from package position.
Define clock, reset, and configuration timing against the device's 10 ns propagation-delay grade rather than relying only on the 125 MHz maximum-frequency headline. The maximum frequency is not a guarantee that every routed interface meets timing at that rate. Constrain input and output paths in the timing tool, validate external clock jitter and skew, and keep programming or test signals away from sensitive data lines to prevent configuration activity from coupling into adjacent signals.
Do not substitute LC4064V-10T48I, LC4064V-10TN48I, LC4064C-10T48I, or LC4064ZE-7TN48C solely because the packages look alike. Confirm the complete ordering code, pinout, I/O voltage options, timing grade, temperature grade, and programming compatibility in the manufacturer documentation. A successful package match establishes only mechanical compatibility; electrical, configuration-file, and timing compatibility must also be demonstrated before treating a candidate as a drop-in replacement.
合規資訊
No definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were identified for this exact ordering code. The I suffix is treated as an industrial-temperature designation, not as proof of AEC-Q100 qualification.