LC4256V-3T144C - 256-Macrocell 400 MHz CPLD | Lattice
MPN: LC4256V-3T144C ✗ 停產LC4256V-3T144C 概覽
A CPLD is a programmable logic device that combines programmable macrocell logic with a fixed internal interconnect structure. In the semiconductor hierarchy, a CPLD is a member of programmable logic, alongside FPGAs and other programmable logic devices. Unlike software-defined control, the LC4256V-3T144C implements its logic directly in hardware, providing deterministic operation after configuration and allowing the completed design to be reprogrammed through the ispMACH programming interface.
The Lattice ispMACH 4000 family supports 3.3V, 2.5V, and 1.8V supply configurations. The LC4256V-3T144C provides 256 macrocells distributed across 16 logic blocks. Up to four global clock pins include programmable clock-polarity control, while the architecture supports up to 80 product terms per output. These resources are useful when a design requires more combinational logic, registered outputs, bus arbitration, or clock-domain control than a small programmable-logic device can accommodate.
The -3 speed designation corresponds to a maximum operating frequency of 400 MHz and a 2.5 ns propagation-delay figure. The internal supply range listed for the device is 3.0V to 3.6V. Its 144-pin TQFP arrangement provides a large number of user I/O connections for board-level integration, although the exact I/O allocation, electrical limits, and configuration requirements must be assigned from the manufacturer pin table and datasheet.
Typical applications include industrial automation, telecommunications infrastructure, consumer electronics, embedded control, high-density peripheral interfacing, and general-purpose programmable logic. The device is particularly appropriate when a design needs deterministic hardware logic, extensive I/O, multiple clock inputs, and the ability to update configuration without removing the package from the circuit.
For a new layout, place programming and configuration signals away from sensitive timing paths, follow the manufacturer's recommended decoupling and termination guidance, and verify every pin assignment against the exact package drawing. Because the device is identified as obsolete, new production designs should first confirm lifecycle requirements and consider a currently supported programmable-logic platform.
This page consolidates the device identity, operating characteristics, lifecycle information, package constraints, comparison points, and engineering guidance needed to evaluate an LC4256V-3T144C before making a design or sourcing decision.
直接替換替代品,適用於 LC4256V-3T144C — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
LC4256V-3TN144C
✅ 直接替換📋 參考替代品(不在目錄中)
LC4256V-5TN144C
✅ 直接替換📋 參考替代品(不在目錄中)
LC4256V-75TN144C
✅ 直接替換📋 參考替代品(不在目錄中)
LC4256V-3T144C 最大額定值與電氣特性
| Product Type | In-system programmable SuperFAST high-density PLD |
| Programmable Logic Family | ispMACH 4000 series |
| Macrocells | 256 macrocells |
| Logic Blocks | 16 logic blocks |
| Maximum Operating Frequency | 400 MHz |
| Propagation Delay | 2.5 ns maximum |
| Supported Supply Configurations | 3.3V, 2.5V, and 1.8V |
| Internal Supply Voltage Range | 3.0V to 3.6V |
| Global Clock Pins | Up to 4 pins with programmable clock polarity |
| Product Terms per Output | Up to 80 |
| Programmable Type | In-system programmable |
| 封裝 | 144-pin TQFP |
| Package Dimensions | 20 mm x 20 mm |
| 安裝類型 | Surface mount |
| General Component Category | CPLD |
LC4256V-3T144C 20 mm x 20 mm 腳位配置指南
LC4256V-3T144C(20 mm x 20 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: LC4256V-3T144C.
請參閱 資料表 以查看完整腳位配置。
典型應用
LC4256V-3T144C 適用於 6 應用s: Industrial Automation Control, Telecommunications Interface Logic, Consumer Electronics Control, Embedded Peripheral Interfacing, Programmable Clock and Data Routing, High-Density Board Glue Logic.
Industrial Automation Control
The LC4256V-3T144C fits industrial control blocks that coordinate sensors, actuators, interlocks, and communication logic. Its 256 macrocells and 16 logic blocks provide substantially more implementation capacity than a small entry-level CPLD, while the listed 400 MHz maximum frequency and 2.5 ns propagation delay support timing-sensitive control paths. The device is programmed as ispMACH 4000-family logic and can be updated through its in-system programming architecture. For a production design, verify the specified operating-temperature range, I/O voltage tolerances, isolation strategy, and functional-safety requirements. The 144-pin TQFP also offers many external connections for bus decoding, status reporting, and distributed control connections.
推薦
Telecommunications Interface Logic
The LC4256V-3T144C is suitable for telecommunications equipment requiring deterministic protocol handling, line-card control, and status multiplexing. Its 16 logic blocks and 256 macrocells can implement multiple finite-state machines, framing logic, and interface adapters, while up to four global clock inputs with programmable polarity support coordinated clocking. The listed 2.5 ns propagation delay provides useful timing margin for high-speed control paths. In a line card, the CPLD can bridge parallel processor interfaces to serial backplanes or consolidate board-level status signals. Validate propagation delay, setup time, hold time, and I/O standards against the actual system clocking scheme before release.
推薦
Consumer Electronics Control
The LC4256V-3T144C can implement control, display sequencing, key scanning, peripheral arbitration, and product-architecture glue logic in consumer electronics. Its 256 macrocells allow several interacting state machines and I/O maps to be consolidated in one programmable device, reducing the need for separate fixed-function glue devices. The 400 MHz maximum operating frequency is more than sufficient for many control paths and supports efficient registered-interface implementations. Because the device is obsolete, designers should assess whether its legacy programming flow and supply arrangement justify a new design. If selected for repair or continuation of an existing platform, validate all I/O standards and configuration signals against the original board schematic.
推薦
Embedded Peripheral Interfacing
The LC4256V-3T144C is well suited to legacy embedded systems that require programmable interfacing between a host processor and multiple peripherals. The ispMACH 4000 architecture provides 256 macrocells for address decoding, bus arbitration, FIFO-like data movement, interrupt coordination, and protocol conversion. Its 144-pin TQFP exposes a large I/O count for parallel buses and multiple peripheral connections, while in-system programmability allows configuration updates during production or field maintenance. Designers should reserve configuration pins and programming access exactly as shown in the manufacturer pin table. Timing closure should include external bus loading, trace delay, and the selected I/O standard rather than relying only on the device's 2.5 ns propagation-delay specification.
推薦
Programmable Clock and Data Routing
The LC4256V-3T144C can serve as a centralized routing and control element when a board contains several clocked domains. Up to four global clock pins with programmable polarity provide a basis for coordinating register transfers, while 16 logic blocks can implement clock-domain crossing, framing, and arbitration functions. The device's 400 MHz maximum operating frequency and 2.5 ns propagation delay make it suitable for timing-sensitive routing logic outside the main processor. The implementation must still define metastability controls, reset synchronization, and clock-quality expectations. Use the manufacturer timing information to calculate setup and hold margins for every clocked path and avoid treating the maximum frequency as a guarantee for every possible logic configuration.
推薦
High-Density Board Glue Logic
The LC4256V-3T144C fits legacy boards that need a single programmable device to consolidate miscellaneous decode, muxing, interrupt, and reset logic. With 256 macrocells across 16 blocks, it can absorb logic that would otherwise occupy multiple small CPLDs and supporting glue components. The large 144-pin TQFP package provides sufficient connections for buses, chip selects, and discrete control signals, and in-system programming simplifies production configuration. The device should be considered for maintenance and continuation designs because it is identified as obsolete. Before replacing several fixed-logic ICs, verify every active-low or active-high control, I/O direction, pull condition, and power-sequencing requirement so that consolidation does not alter board-level behavior.
推薦
推薦產品摘要
工程參考資料,適用於 LC4256V-3T144C — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | LC4256V-3TN144C | LC4256V-5TN144C | LC4256V-75TN144C |
|---|---|---|---|---|
| Brand | Lattice Semiconductor Corporation | Lattice Semiconductor Corporation | Lattice Semiconductor Corporation | Lattice Semiconductor Corporation |
| Package | 144-pin TQFP | 144-pin TQFP | 144-pin TQFP | 144-pin TQFP |
| Speed Grade | -3 | -3 | -5 | -75 |
主要差異化特點
- Fastest documented speed grade among the listed 144-pin alternatives (對比LC4256V-5TN144C)
- Closer timing equivalence to the target than the -75 option (對比LC4256V-75TN144C)
- Exact -3 speed family option with matching 144-pin package (對比LC4256V-3TN144C)
設計說明
Do not treat every 144-pin ispMACH 4000 ordering code as an interchangeable speed grade. The LC4256V-3T144C, -3TN144C, -5TN144C, and -75TN144C use different ordering suffixes, and the slower grades can invalidate an existing timing closure. Before replacing the device, compare the speed-grade table, temperature or qualification suffix, pin descriptions, supply configuration, and configuration interface in the manufacturer datasheet.
Use the manufacturer package drawing for the 144-pin TQFP footprint and keep the configuration interface accessible for programming. Place decoupling connections close to their associated power pins, provide a continuous ground reference, and route high-speed clock inputs away from noisy programming or interface signals. Validate trace lengths, I/O standards, pull components, and programming access against the reference design before releasing the PCB.
The listed 400 MHz maximum frequency is a device-family timing figure, not a guarantee for every implemented path. Evaluate setup and hold timing, external clock jitter, output loading, and the selected I/O standard for the actual board. Add external synchronization or metastability controls where signals cross unrelated clock domains, and use the manufacturer's timing report after logic placement and routing are complete.
合規資訊
No definitive RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration for the exact LC4256V-3T144C ordering code was present in the available records. AEC-Q100 is not applicable because this is a programmable-logic IC rather than an automotive-qualified component.