LMV932MMX/NOPB - Dual 1.8V RRIO Op Amp 1.5MHz | TI
MPN： LMV932MMX/NOPB ✓ 啟用中LMV932MMX/NOPB 概覽
An operational amplifier (op amp) is a high-gain voltage amplifier with differential inputs and a single-ended output, the fundamental building block of analog signal chains. Within the power-management hierarchy of a system, general-purpose op amps such as this one sit between sensors and ADCs, performing amplification, filtering, buffering, and level shifting. The LMV93x-N family spans a single (LMV931-N), dual (LMV932-N), and quad (LMV934-N) to cover channel-count scaling.
Key features include guaranteed operation down to 1.8V for single-cell Li-Ion or two-cell alkaline end-of-life conditions, rail-to-rail input common-mode that extends to both supply rails, and rail-to-rail output swing that maximizes dynamic range at low supply voltages. The NOPB suffix confirms lead-free, RoHS-compliant packaging. Temperature range is -40C to +125C, and the MMX suffix denotes the VSSOP-8 (DGK) surface-mount package suited to area-constrained PCBs.
The rail-to-rail input stage typically uses complementary PMOS/NMOS differential pairs to avoid common-mode crossover distortion near the rails, allowing sensor signals at or near ground or VCC to be processed accurately. The output stage swings within millivolts of the rails under light load, maximizing ADC input utilization at 1.8V operation.
Typical applications include mobile phone and tablet audio or sensor front ends, battery-powered instrumentation, active filters in portable medical devices, and low-voltage ADC driver stages. The compact VSSOP footprint makes the part a good fit for dense multi-channel boards.
Design consideration: at 1.8V supply, output current capability and headroom are limited; keep load impedances above several kilohms and verify bandwidth requirements, since 1.5MHz gain-bandwidth means closed-loop gains of 10 or more restrict usable signal bandwidth to well under 150kHz.
直接替換替代品，適用於 LMV932MMX/NOPB — 相同封裝，腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號： LMV932MMX/NOPB （相同外形與佔位） — 差異在於 Package, Gain Bandwidth Product, Supply Voltage Range, Input Bias Current, Mounting Type.
TLV9152IDGKR
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →TLV2452AIDGKR-Q1
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →LMV612MMX/NOPB
⚡ 相同封裝📋 參考替代品（不在目錄中）
LMV932MMX/NOPB 最大額定值與電氣特性
| Number of Channels | 2 |
| Supply Voltage Range | 1.8 V to 5.5 V |
| Gain Bandwidth Product | 1.5 MHz |
| Output Current | 5 mA |
| Input/Output Type | Rail-to-Rail Input and Output (RRIO) |
| Amplifier Type | General Purpose |
| 工作溫度 | -40C to +125C |
| 封裝 | 8-VSSOP (DGK) |
| 安裝類型 | Surface Mount |
| Terminal Finish | Lead-free (NOPB) |
| RoHS 狀態 | Compliant |
| Automotive Qualification | Automotive temperature grade (per distributor data) |
LMV932MMX/NOPB 腳位配置
| 腳位 1 | OUT A — Output of amplifier A |
| 腳位 2 | -IN A — Inverting input of amplifier A |
| 腳位 3 | +IN A — Non-inverting input of amplifier A |
| 腳位 4 | V- — Negative supply / ground |
| 腳位 5 | +IN B — Non-inverting input of amplifier B |
| 腳位 6 | -IN B — Inverting input of amplifier B |
| 腳位 7 | OUT B — Output of amplifier B |
| 腳位 8 | V+ — Positive supply (1.8V to 5.5V) |
典型應用
LMV932MMX/NOPB 適用於 6 應用s: Portable Battery-Powered Sensor Front End, Mobile Phone and Tablet Audio/Sensor Circuitry, Active Filter Stages in Low-Voltage Systems, Industrial Sensor Signal Conditioning, Comparators and Threshold Detectors (Op Amp as Comparator), ADC Driver for Low-Speed Data Converters.
Portable Battery-Powered Sensor Front End
In two-cell alkaline or single-cell Li-Ion products, the supply can sag to 1.8V near end of discharge; the LMV932MMX/NOPB is guaranteed to operate at that level with rail-to-rail input and output, preserving signal swing as the battery drains. Used as a non-inverting amplifier between a bridge or resistive sensor and an ADC, its RRIO input accepts signals at or near ground while the output swings within millivolts of the rails, maximizing ADC code utilization. The 1.5MHz gain-bandwidth comfortably handles low-frequency sensor signals, and the compact VSSOP-8 package fits dense handheld PCBs.
推薦
Mobile Phone and Tablet Audio/Sensor Circuitry
TI explicitly targets the LMV93x-N family at mobile phones and tablets because the 8-pin VSSOP and low-voltage operation suit area-constrained, battery-driven boards. In handsets the dual channel lets one side buffer a microphone or sensor signal while the second stage implements an active anti-aliasing filter, doubling channel density versus single amps. The 1.8V to 5.5V range matches the 1.8V digital rails common in mobile platforms, eliminating a dedicated higher-voltage analog supply, and the 5mA output capability is adequate for driving filters and ADC inputs in these signal chains.
推薦
Active Filter Stages in Low-Voltage Systems
Sallen-Key and multiple-feedback filters built with the LMV932MMX/NOPB work well at 1.8V to 5.5V because the RRIO output maximizes headroom for filter response at low supplies, avoiding clipping on signals near the rails. With 1.5MHz gain-bandwidth, low-order filters with cutoffs up to tens of kilohertz and gains of 1 to 5 achieve accurate response; designers should budget GBW margin (typically 100x the cutoff times the Q) for precision filters. Both channels in the VSSOP-8 enable second-order sections in a single tiny footprint, ideal for anti-aliasing before low-speed ADCs.
推薦
Industrial Sensor Signal Conditioning
Across the -40C to +125C industrial temperature range, the LMV932MMX/NOPB conditions 4-20mA receiver voltages, thermistor dividers, and pressure-sensor outputs on 3.3V or 5V rails. Its rail-to-rail input tolerates common-mode signals all the way to the positive rail, which simplifies high-side current-sense resistor buffering at low supply voltages where conventional amplifiers run out of headroom. Distributor data notes an automotive temperature grade for the package option, supporting extended-reliability industrial programs. The 5mA output can directly drive comparison thresholds, LED indicators, or additional filter stages.
推薦
Comparators and Threshold Detectors (Op Amp as Comparator)
One LMV932MMX/NOPB channel can serve as a low-voltage threshold detector with hysteresis while the other remains available for amplification, a common board-consolidation technique in cost-sensitive designs. The RRIO input means trip points can be set very close to either rail using resistor dividers on 1.8V to 5.5V supplies. Note that a general-purpose op amp is slower than a dedicated comparator; at 1.5MHz GBW, response times are in the microsecond range, adequate for supervisory and level-detection functions but not for fast logic-level signaling, where a purpose-built comparator should be used instead.
推薦
ADC Driver for Low-Speed Data Converters
Before a SAR or delta-sigma ADC operating at 1.8V to 5V, the LMV932MMX/NOPB buffers sensor signals and drives the sampling network through an RC charge-kickback filter. Its rail-to-rail output preserves full-scale range, and the 5mA output current handles typical 10-100kohm effective input impedances. For sample rates below roughly 100ksps with settling budgets of a few microseconds, the 1.5MHz GBW is sufficient in gains up to about 4x; beyond that, select a wider-bandwidth dual such as the TLV9152 in the identical VSSOP-8 footprint for a direct upgrade without PCB redesign.
推薦
推薦產品摘要
工程參考資料，適用於 LMV932MMX/NOPB — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | TLV9152IDGKR | TLV2452AIDGKR-Q1 | LMV612MMX/NOPB | OPA2172 |
|---|---|---|---|---|---|
| Package | 8-VSSOP (DGK) | VSSOP-8 (DGK) - same | VSSOP-8 (DGK) - same | VSSOP-8 - same | VSSOP-8 (DGK) - same |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Channels | 2 | 2 | 2 | 2 | 2 |
| Supply Voltage Range | 1.8V to 5.5V | 1.8V to 5.5V | 2.7V to 6V | 1.8V to 5.5V | 2.2V to 36V |
| I/O Type | RRIO | RRIO | RRO | RRIO | RRO |
| Temperature Range | -40C to +125C | -40C to +125C | -40C to +125C (AEC-Q100) | -40C to +125C | -40C to +125C |
主要差異化特點
- True 1.8V minimum supply (對比TLV2452AIDGKR-Q1)
- Rail-to-rail input AND output (對比OPA2172)
- Lower cost general-purpose positioning (對比TLV9152IDGKR)
設計說明
The 1.5MHz gain-bandwidth limits closed-loop performance: a gain-of-10 stage delivers only ~150kHz of bandwidth before rolloff, so verify loop gain margin for gains above 5 and for filter Q values above 1. Do not use this general-purpose op amp where a dedicated comparator is needed for fast switching - response will be in the microsecond range.
Keep load impedance above several kilohms, especially at 1.8V supply where the 5mA output-current capability and voltage headroom are both limited. Rail-to-rail output swing degrades under heavy load, reducing usable dynamic range; for driving ADC inputs, use an RC isolation resistor (tens of ohms) at the output.
Place 100nF ceramic decoupling capacitors within 2mm of the V+ pin on pin 8 with a low-impedance ground return to pin 4. The VSSOP-8 has a 1.27mm pin pitch on 3x3mm body - keep analog input traces short and guard the high-impedance inverting node with ground pour to limit leakage and noise pickup.
合規資訊
NOPB suffix denotes Non-Pb (lead-free) TI packaging. RoHS compliant per distributor listings. AEC-Q100 qualification not confirmed for this device; a Partstack listing references an automotive temperature grade but Q1 qualification is not verified.
