M2GL005-TQ144I - 6060-Cell 1.2V FPGA | Microchip Technology
MPN： M2GL005-TQ144I ✓ 啟用中M2GL005-TQ144I 概覽
An FPGA is a programmable-logic semiconductor whose digital circuits are defined by a configuration bitstream rather than fixed mask programming. Within the product hierarchy, the M2GL005 belongs to the IGLOO2 family of low-density FPGAs, which sit below higher-capacity programmable-logic devices and are commonly used as coprocessors, interface conditioners, system-control engines, or I/O concentrators. The M2GL005-TQ144I combines approximately 6000 logic elements with a 144-pin package to provide a practical balance of routing capacity, I/O availability, and board space.
The device is identified as a 1.2 V IGLOO2 FPGA with 6060 cells. Its embedded flash configuration technology allows the implemented logic to be retained in the device, which is useful in systems that require reconfigurable peripherals, field updates, or application-specific digital functions without external configuration memory. The TQFP-144 package also provides a familiar leaded footprint for manufacturing processes that do not require an ultra-fine-pitch BGA package.
Microchip identifies the IGLOO2 family as suitable for communications, industrial, and embedded applications where bridging, I/O expansion, conversion, system management, and secure connectivity functions are required. A typical design places the FPGA beside one or more interface controllers, connects it to sensors, displays, memory, or communications transceivers, and loads its configuration through a programmer or an in-system programming path. The exact logic-cell organization, supported I/O standards, configuration interface, and performance grades must be checked in the manufacturer datasheet for the selected device variant.
One important design consideration is that the TQFP-144 footprint consumes more board area and has finer lead pitch than many modern BGA or QFN options. Designers should preserve access to all 144 pads, maintain suitable copper and solder-mask geometry, and route configuration signals away from sensitive analog or high-speed interfaces. Power, ground, decoupling, and unused-pin treatment should follow the manufacturer’s device-specific recommendations.
This product page combines the exact M2GL005 family identifiers, package information, sourcing details, technical alternatives, application guidance, and PCB-focused design notes. It helps engineers identify whether the 144-pin IGLOO2 device provides the required logic density and can be substituted without changing the board footprint.
直接替換替代品，適用於 M2GL005-TQ144I — 相同封裝，腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號： M2GL005-TQ144I （相同外形與佔位） — 差異在於 Device Type, Package, Configuration Memory, Logic Elements, RoHS Status.
M2GL005-TQG144I
✅ 直接替換📋 參考替代品（不在目錄中）
M2GL005-TQ144
✅ 直接替換聯絡詢價
查看資料表 →M2GL005S-TQ144I
✅ 直接替換📋 參考替代品（不在目錄中）
M2GL005S-1TQ144I
✅ 直接替換📋 參考替代品（不在目錄中）
M2GL005S-1TQ144T2
✅ 直接替換📋 參考替代品（不在目錄中）
M2GL005-TQ144I 最大額定值與電氣特性
| Device Type | Flash FPGA |
| FPGA Family | IGLOO2 |
| Logic Cells | 6060 cells |
| Nominal Logic Elements | Approximately 6000 logic elements |
| Operating Voltage | 1.2 V |
| Configuration Memory | Embedded flash |
| 封裝 | 144-pin TQFP |
| Package Type | Leadless? No; 144-lead TQFP |
| 安裝類型 | Surface mount |
| Temperature Grade | Industrial grade, -40C to +85C |
| Logic Element Count | 6060 cells |
| RoHS 狀態 | unknown |
| REACH Status | unknown |
M2GL005-TQ144I leadless? no; 144-lead tqfp 腳位配置指南
M2GL005-TQ144I（leadless? no; 144-lead tqfp 封裝）的腳位配置。 此數位 IC 包含 GPIO、通訊介面（UART、SPI、I2C）與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料： M2GL005-TQ144I.
請參閱 資料表 以查看完整腳位配置。
典型應用
M2GL005-TQ144I 適用於 6 應用s: Industrial Protocol Bridging, I/O Expansion and Signal Conditioning, Communications Data Conversion, Secure Connectivity and Authentication, Data Acquisition and System Management, Embedded Display and Control.
Industrial Protocol Bridging
The Microchip Technology M2GL005-TQ144I fits protocol-bridging tasks that require approximately 6000 programmable logic elements without a large FPGA. Its 6060-cell IGLOO2 architecture can implement parallel-to-serial conversion, framing, filtering, and interface state machines around slower embedded processors. The 144-pin TQFP package provides access to a substantial pin count while retaining a leaded surface-mount footprint. Designers should use the manufacturer pin table to assign bank-specific I/O and confirm every voltage standard against the selected suffix before routing industrial signals.
推薦
I/O Expansion and Signal Conditioning
The M2GL005-TQ144I is suitable for I/O expansion where a microcontroller lacks sufficient pins or needs deterministic parallel logic. Its 6060 logic cells can implement input synchronization, pulse conditioning, level translation control, latch banks, and status multiplexing, while the 144-pin TQFP package exposes a large number of user connections. The 1.2 V core operates from the IGLOO2 family architecture, but external interface levels remain determined by the assigned I/O banks and device ratings. Use the manufacturer pin-description and electrical-characteristics tables for final bank assignments.
推薦
Communications Data Conversion
The M2GL005-TQ144I can perform communications data conversion as a hardware-assisted engine beside a host processor. The 6060-cell IGLOO2 fabric is large enough for parallel interface conversion, buffering, packet filtering, and fixed-format data assembly at modest throughput levels. Its embedded flash configuration supports deterministic reload after power cycling, and the 144-pin package offers a practical route into industrial and communications equipment. The actual supported data rates depend on the selected speed grade, I/O standards, clocking, timing closure, and board-level signal integrity.
推薦
Secure Connectivity and Authentication
The M2GL005-TQ144I can support secure-connectivity functions that combine protocol formatting with hardware-backed control logic. Within its approximately 6000 available logic elements, designers can implement challenge-response logic, command filters, key-operation sequencing, and status monitoring without relying entirely on a microcontroller. Embedded flash configuration makes the implementation persistent across power cycles, while the 144-pin TQFP package supports both configuration and external interfaces. Security strength still depends on the complete design, key-handling architecture, access controls, and the selected device’s security capabilities.
推薦
Data Acquisition and System Management
The M2GL005-TQ144I is well suited to data-acquisition support functions such as timing control, sample sequencing, trigger routing, and sensor-interface management. The 6060-cell IGLOO2 fabric can coordinate multiple converters while offloading deterministic tasks from a host MCU, and the 144-pin TQFP package supplies many external signal connections. For precision measurement systems, keep sensitive analog routing away from FPGA switching activity, follow the manufacturer grounding and decoupling plan, and validate timing margins against the actual clock and I/O configuration.
推薦
Embedded Display and Control
The M2GL005-TQ144I can act as a display and control coprocessor in embedded equipment, implementing timing generation, refresh sequencing, keypad scanning, LED multiplexing, and display-data formatting. The IGLOO2 family’s embedded flash configuration preserves the control logic across restarts, while the 144-pin TQFP package offers enough external connectivity for parallel panels and discrete controls. Designers should budget board area for the leaded package, keep display and switching-clock return paths separated, and use the manufacturer timing specifications to establish refresh and setup-and-hold margins.
推薦
推薦產品摘要
工程參考資料，適用於 M2GL005-TQ144I — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | M2GL005-TQG144I | M2GL005-TQ144 | M2GL005S-TQ144I | M2GL005S-1TQ144I | M2GL005S-1TQ144T2 |
|---|---|---|---|---|---|---|
| Package | TQFP-144 | TQFP-144 | TQFP-144 | TQFP-144 | TQFP-144 | TQFP-144 |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| FPGA Family | IGLOO2 | IGLOO2 | IGLOO2 | M2GL005S family | M2GL005S family | M2GL005S family |
| Device Family Variant | M2GL005 base family | M2GL005 base family | M2GL005 base family | M2GL005S variant | M2GL005S-1 variant | M2GL005S-1T2 variant |
| Pin Count | 144 pins | 144 pins | 144 pins | 144 pins | 144 pins | 144 pins |
| Mounting Type | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount |
主要差異化特點
- Directly documented 6060-cell equivalent in the same TQFP footprint (對比M2GL005-TQG144I)
- Embedded flash configuration avoids a separate configuration PROM (對比M2GL005S-1TQ144I)
- Mid-range logic density supports useful embedded control functions (對比M2GL005-TQ144)
設計說明
Use the manufacturer TQFP-144 land pattern and package drawing rather than a generic 144-pin footprint. Confirm body size, lead span, lead pitch, courtyard, and solder-mask clearance against the exact ordering option. Keep the programming interface and configuration pins away from long, unprotected traces, and provide unobstructed board edges where the assembly process requires visual inspection.
Follow the IGLOO2 device-specific power-supply, decoupling, and sequencing recommendations. Place bypass capacitors at the appropriate supply pins with short ground returns, and keep switching-current paths confined to the device’s power and ground network. The 1.2 V value identifies the device operating class; it should not be treated as the complete board power-supply requirement or as permission to apply 1.2 V directly to every I/O bank.
Plan user I/O by voltage bank and function before assigning board signals. Route clocks and configuration activity away from sensitive analog inputs, and terminate or isolate interfaces according to their signal-integrity requirements. Because the M2GL005-TQ144I has many external connections in a fine-pitch leaded package, use short escape routes where possible and avoid long stubs between the device and nearby passive components.
Do not substitute M2GL005, M2GL005S, speed, temperature, or packaging suffixes solely because the packages appear identical. Confirm the manufacturer ordering information, electrical limits, supported configuration method, and numbered pin assignments for every proposed drop-in replacement. Also verify that the original design does not rely on a programming fixture or test setup intended for a different suffix.
合規資訊
The available product information does not provide explicit compliance declarations for this ordering code. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-minerals status from the current manufacturer product documentation.
