M2GL060T-FG676 - 56.5K Logic Cells IGLOO2 FPGA | Microchip
MPN： M2GL060T-FG676 ✓ 啟用中M2GL060T-FG676 概覽
An FPGA is a programmable semiconductor containing configurable logic blocks, programmable interconnect resources, and input/output circuitry. Unlike a fixed-function application-specific integrated circuit, an FPGA can be programmed after manufacture for a defined control, interface, datapath, or system-management function. The M2GL060T-FG676 belongs to the IGLOO 2 family and provides 56.5K logic elements and 387 I/O in the 676-FBGA package identified by the FG676 ordering code.
The 387-I/O count provides a large external interface capacity for parallel buses, control signals, data acquisition, communication interfaces, and mixed logic systems. The 676-ball FBGA package supports dense board routing in compact equipment but requires careful PCB layout, power delivery, thermal management, and assembly-process control. The integrated flash configuration feature is useful where the final logic configuration must be stored locally and loaded without an external configuration device.
Typical uses include Gigabit Ethernet or PCI Express control-plane logic, protocol bridging, I/O expansion and conversion, video and image processing, embedded system management, and secure connectivity. These applications benefit from parallel programmable resources and a large pin count, although design partitioning, timing closure, and resource utilization remain important engineering considerations.
When planning a PCB around the M2GL060T-FG676, follow the manufacturer package outline, ball map, and recommended power and ground layouts exactly. Confirm that the assembly process supports the 676-FBGA geometry, inspectability requirements, and solder mask or paste design rules. Route high-speed or sensitive interfaces according to the applicable Microchip guidance rather than treating the device as a conventional low-pin-count FPGA.
This product page combines the confirmed device identity and manufacturer application positioning with package-specific design guidance, replacement considerations, and structured comparison information. It is intended to help engineers confirm fit, plan PCB implementation, and evaluate compatible configuration or speed-grade alternatives before releasing a design to production.
直接替換替代品，適用於 M2GL060T-FG676 — 相同封裝，腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
M2GL060T-1FG676
✅ 直接替換📋 參考替代品（不在目錄中）
M2GL060TS-FG676
✅ 直接替換📋 參考替代品（不在目錄中）
M2GL060T-FGG676
✅ 直接替換📋 參考替代品（不在目錄中）
M2GL060T-FG676 最大額定值與電氣特性
| Device Type | IGLOO 2 low-density flash FPGA |
| Logic Elements | 56.5K LEs |
| User I/O | 387 I/O |
| 封裝 | 676-ball FBGA |
| Package Suffix | FG676 |
| Programmable Logic | 56.5K logic elements |
| Configuration Memory | Embedded flash |
| Device Family | IGLOO 2 |
| 安裝類型 | Surface mount |
| Ball Count | 676 balls |
| I/O Count | 387 I/O |
| RoHS 狀態 | unknown |
M2GL060T-FG676 fg676 腳位配置指南
M2GL060T-FG676（fg676 封裝）的腳位配置。 此數位 IC 包含 GPIO、通訊介面（UART、SPI、I2C）與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料： M2GL060T-FG676.
請參閱 資料表 以查看完整腳位配置。
典型應用
M2GL060T-FG676 適用於 6 應用s: Gigabit Ethernet Control Plane, PCI Express Control and Bridging, Protocol Bridge and I/O Conversion, Video and Image Processing, Industrial System Management, Secure Connectivity and Authentication.
Gigabit Ethernet Control Plane
The M2GL060T-FG676 fits control-plane and auxiliary logic around Gigabit Ethernet interfaces because it combines 56.5K logic elements with 387 I/O. Designers can use the FPGA fabric for packet classification, register mapping, DMA control, status monitoring, and board-level management while a dedicated Ethernet physical-layer device handles the analog network interface. The 676-ball FBGA also permits dense routing among logic blocks, memories, and external controllers. For production use, assign interfaces through the Microchip development flow, validate timing against the selected clocking architecture, and verify that every high-speed differential or serial signal follows the manufacturer’s PCB guidance.
推薦
PCI Express Control and Bridging
The M2GL060T-FG676 can support PCI Express control-plane, configuration, and protocol-bridging functions because its 56.5K logic elements and extensive 387-I/O interface provide substantial programmable resources beside the transceiver and protocol-specific hardware. It is appropriate for status aggregation, register translation, endpoint monitoring, or custom logic that coordinates a wider serial interface. The key engineering consideration is timing closure across the fabric and external interface. Designers should use the manufacturer-supported IGLOO 2 implementation flow, constrain every clock, validate pin assignments, and confirm the selected IGLOO 2 device supports the required protocol resources and operating conditions.
推薦
Protocol Bridge and I/O Conversion
The M2GL060T-FG676 is well suited to bridging dissimilar parallel interfaces because 387 I/O provide ample connections for source and destination buses, while 56.5K logic elements support decoding, arbitration, and data transformation. Typical implementations can map legacy peripheral buses to serial links, translate asynchronous interfaces, or combine control signals from multiple modules. Because the 676-ball FBGA supports dense but electrically demanding routing, assign external interfaces only after checking the exact manufacturer pinout. Keep clock domains separated unless the design includes deliberate clock-domain-crossing logic, and run static timing, I/O-standard, and signal-integrity checks before fabrication.
推薦
Video and Image Processing
The M2GL060T-FG676 can implement parallel pixel pipelines, capture control, thresholding, color processing, and interface conversion because the IGLOO 2 device provides 56.5K logic elements and 387 I/O for wide data paths. Its embedded flash configuration supports compact systems that need the implemented image-processing function stored locally. A practical design divides acquisition, line or frame buffering, and output formatting into timing-bounded pipeline stages. The exact DSP block, memory block, and clocking resources for the target ordering code must be confirmed in the Microchip device table. Validate pixel-clock timing, output standards, and board-level signal integrity with the selected display or image-sensor interface.
推薦
Industrial System Management
The M2GL060T-FG676 is suitable for centralized system-management logic because 387 I/O can collect monitoring and control signals while 56.5K logic elements implement state machines, interlocks, fault handling, and communication adapters. A designer can place the FPGA beside processors or sensors to supervise power sequencing, perform health checks, and translate between incompatible peripheral interfaces. Its embedded flash configuration allows the management function to be fixed before deployment without relying on an external configuration loader. Before deployment in industrial equipment, confirm the decoded temperature and speed options, implement robust clock and reset schemes, and review all I/O tolerances against the external electrical environment.
推薦
Secure Connectivity and Authentication
The M2GL060T-FG676 can support secure-connectivity tasks such as protocol framing, authentication control, key-transfer coordination, and I/O isolation because programmable logic allows security functions to be adapted as system interfaces evolve. The 387-I/O count accommodates parallel sensors, flash interfaces, and control signals, while embedded flash retains the final configuration for repeatable startup behavior. Security implementations still require reviewed algorithms, key-handling practices, fault-injection analysis, and a threat model; the FPGA family name alone does not establish a certified security level. Use the manufacturer’s supported cryptographic implementation methods and confirm that the selected device provides all required memory and logic resources.
推薦
推薦產品摘要
工程參考資料，適用於 M2GL060T-FG676 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | M2GL060T-1FG676 | M2GL060TS-FG676 | M2GL060T-FGG676 |
|---|---|---|---|---|
| Package | 676-FBGA | 676-FBGA | 676-FBGA | 676-FBGA |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Device Family | IGLOO 2 | IGLOO 2 | IGLOO 2 | IGLOO 2 |
| Configuration Memory | Embedded flash | Embedded flash | Embedded flash | Embedded flash |
| Ordering-Code Difference | Base FG676 suffix | Adds -1 speed-grade identifier | Adds S before FG676 | Adds G within FG G676 suffix |
| Primary Applications | Bridging, I/O expansion, video and image processing, system management, secure connectivity | General-purpose IGLOO 2 programmable logic | General-purpose IGLOO 2 programmable logic | Bridging, I/O expansion, video and image processing, system management, secure connectivity |
主要差異化特點
- Confirmed 387-I/O integration in a 676-FBGA package (對比M2GL060T-1FG676)
- Embedded-flash IGLOO 2 configuration (對比M2GL060TS-FG676)
- Large 56.5K-logic-element programmable fabric (對比M2GL060T-FGG676)
設計說明
Use the Microchip 676-ball package drawing and recommended land pattern as the authority for pad geometry, solder-mask clearance, and paste volume. Confirm the board stack-up, via strategy, and assembly process with the PCB fabricator before release. A 676-ball FBGA is not electrically or thermally equivalent to a low-pin-count QFP, so changes to the footprint or copper distribution must be reviewed against the manufacturer package guidelines.
Partition the 676-ball device into the power and ground balls specified by Microchip and connect them through the recommended plane or via arrangement. Place required bypass capacitors close to their associated supply pins and keep high-current paths physically short. Validate steady-state and transient current against the decoded device limits before choosing regulators, ferrite impedances, and copper widths; do not infer these values from the package name.
Assign pins from the manufacturer ball map rather than from a generic FPGA symbol. Review every external I/O standard, drive strength, pull state, and clock relationship in the device constraints. Use controlled return paths for clocks and sensitive interfaces, separate noisy inputs from precision analog-adjacent circuitry, and reserve test access for configuration, boundary scan, and production programming.
Do not approve a substitute solely because its order code ends in FG676. Decode the speed, temperature, package, and other ordering fields, then compare supply voltage, configuration method, I/O standards, timing, and ball assignments. In particular, verify M2GL060T-1FG676, M2GL060TS-FG676, and M2GL060T-FGG676 against the target M2GL060T-FG676 using the Microchip device table before changing a released BOM.
合規資訊
The accessible manufacturer product-page text and search results do not state the compliance fields. Confirm RoHS, REACH, AEC-Q100 status, lead-free construction, halogen-free status, and conflict-minerals declarations for the exact ordering code in Microchip’s current product documentation.