MAX3243CDBRG4 - 250kbps RS-232 Transceiver | Texas Instruments
MPN: MAX3243CDBRG4 ✓ 啟用中MAX3243CDBRG4 概覽
An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 line levels and converts received RS-232 signals back into logic-compatible levels. Within the interface hierarchy, the MAX3243 belongs to the RS-232 transceiver family, providing bidirectional signal conditioning between a host controller and external serial equipment. Its multichannel configuration reduces the number of external interface components required for multiport designs.
Key operating characteristics include a 3 V to 5.5 V supply range, a maximum data rate of 250 kbps, three driver channels, three receiver channels, and ±15 kV human-body-model ESD protection. These features make the device useful for industrial control systems, POS terminals, instrumentation, and embedded systems that connect legacy RS-232 equipment over cable lengths where transient electrical noise is likely.
The MAX3243 is designed for single-ended RS-232 communication and supports both 3 V and 5 V system rails, allowing the same interface design to be used across different logic-voltage systems. Its integrated multichannel architecture simplifies board space compared with separate single-channel transceivers. ESD protection improves robustness at connector-facing pins, although designers must still use appropriate cable, grounding, and signal-integrity practices.
Typical applications include industrial serial controllers, point-of-sale equipment, barcode and label printers, security systems, test equipment, and embedded data-acquisition systems. In each case, the three-channel arrangement can serve multiple serial ports while limiting the number of external line-driver and receiver assemblies.
A key implementation consideration is that RS-232 uses unbalanced single-ended signaling and is not a direct substitute for differential RS-422 or RS-485. PCB routing should keep driver and receiver traces away from noisy switching nodes, while grounding and cable practices should follow the applicable RS-232 system requirements.
This page combines the exact manufacturer specifications for the MAX3243CDBRG4 with package, sourcing, and engineering guidance. It also identifies same-footprint family alternatives and highlights the temperature-grade and lifecycle checks that should be completed before approving a replacement for an existing design.
直接替換替代品,適用於 MAX3243CDBRG4 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
MAX3243CPW
✅ 直接替換聯絡詢價
查看資料表 →MAX3243CWE
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
MAX3243EWE
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
MAX3243CDBRG4 規格
| Product Type | Multichannel RS-232 line driver and receiver |
| Supply Voltage Range | 3 V to 5.5 V |
| Maximum Data Rate | 250 kbps |
| Driver Channels | 3 channels |
| Receiver Channels | 3 channels |
| ESD Protection | ±15 kV HBM |
| Transceiver Configuration | 3/5 full-duplex channels |
| 封裝 | 28-pin SSOP |
| Package Code | DBR |
| Terminal Count | 28 terminals |
| 安裝方式 | Surface mount, gull wing |
| Package Width | 5.30 mm |
| Temperature Grade | Commercial |
MAX3243CDBRG4 5.30 mm 腳位配置指南
MAX3243CDBRG4(5.30 mm 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: MAX3243CDBRG4.
請參閱 資料表 以查看完整腳位配置。
典型應用
MAX3243CDBRG4 適用於 6 應用s: Industrial Serial Controllers, Point-of-Sale Terminals, Barcode and Label Printers, Test and Measurement Equipment, Security and Access-Control Systems, Embedded Data-Acquisition Systems.
Industrial Serial Controllers
The MAX3243CDBRG4 fits industrial controllers that must connect several RS-232 devices over long cable runs. Its three drivers and three receivers provide a 3/5 full-duplex interface in one 28-pin SSOP, while the 3 V to 5.5 V supply range supports common embedded controller rails. The 250 kbps maximum data rate is appropriate for supervisory links, configuration ports, and legacy production equipment. Use the three-channel arrangement to reduce external driver and receiver count, and route connector-facing traces away from switching nodes. The ±15 kV HBM ESD rating improves connector robustness, although cable grounding and enclosure design remain important in electrically noisy installations.
推薦
Point-of-Sale Terminals
The MAX3243CDBRG4 is suitable for point-of-sale terminals requiring multiple RS-232 ports for peripherals such as printers, scanners, scales, and customer displays. Its three integrated drivers and three receivers reduce the number of interface chips needed for a multiport design, while the compact 28-pin SSOP helps preserve PCB area. Operation from 3 V to 5.5 V allows deployment with both 3.3 V and 5 V controller platforms. The 250 kbps rate is more than sufficient for typical peripheral command and status traffic. Place the transceiver near the connector ground reference and use controlled return paths to minimize cable-induced noise.
推薦
Barcode and Label Printers
The MAX3243CDBRG4 supports barcode scanners, industrial label printers, and receipt printers that use RS-232 command protocols. Three driver and receiver channels can serve a printer, scanner, and status device through a common interface IC, reducing component count compared with separate transceivers. Its 250 kbps capability provides ample bandwidth for short commands and status responses. The 3 V to 5.5 V supply range supports embedded systems with different logic rails, and ±15 kV HBM ESD protection is useful near user-accessible connectors. Maintain a solid connector ground and route the interface away from motor and relay-driver currents.
推薦
Test and Measurement Equipment
The MAX3243CDBRG4 is appropriate for programmable instruments and legacy test systems that expose one or more RS-232 control ports. Three channels allow a single package to support a host interface plus two peripheral connections, while the 28-pin SSOP simplifies board-level routing. The 250 kbps maximum signaling rate supports command transfers and low-to-moderate-volume measurement data. Operation from 3 V to 5.5 V gives designers flexibility across modern mixed-voltage systems. For bench equipment, keep the ground reference continuous through the analog and digital sections and protect exposed connector pins with appropriate system-level grounding practices.
推薦
Security and Access-Control Systems
The MAX3243CDBRG4 can support RS-232 connections in access-control panels, alarm controllers, and card-reader interfaces. The integrated three-channel structure is useful when a panel must communicate with several low-speed field devices through a shared PCB. Its 250 kbps data rate accommodates configuration and event traffic, and the 3 V to 5.5 V operating range supports both legacy 5 V and modern 3.3 V control systems. The ±15 kV HBM ESD rating adds protection for connector-accessible circuitry. Nevertheless, installers should use shielded cables, correct signal grounding, and surge-protection strategies appropriate to the installation environment.
推薦
Embedded Data-Acquisition Systems
The MAX3243CDBRG4 fits embedded acquisition units that communicate with legacy sensors, programmers, or laboratory modules through RS-232. Three drivers and three receivers allow several ports to share one interface package, and the 28-pin SSOP supports compact controller boards. The device accepts a 3 V to 5.5 V supply and communicates at up to 250 kbps, making it suitable for configuration and short data-burst traffic rather than high-bandwidth streaming. Keep clocked and switching circuitry away from connector traces, maintain a continuous ground path, and validate cable length and topology during system testing because RS-232 is a single-ended interface sensitive to reference-potential differences.
推薦
推薦產品摘要
工程參考資料,適用於 MAX3243CDBRG4 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MAX3243CPW | MAX3243CWE | MAX3243EWE |
|---|---|---|---|---|
| Product Type | 3-channel RS-232 line driver and receiver | 3-channel RS-232 line driver and receiver | 3-channel RS-232 line driver and receiver | 3-channel RS-232 line driver and receiver |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 28-pin SSOP | 28-pin SSOP | 28-pin SSOP | 28-pin SSOP |
| Supply Voltage Range | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V |
| Maximum Data Rate | 250 kbps | 250 kbps | 250 kbps | 250 kbps |
| Driver Channels | 3 channels | 3 channels | 3 channels | 3 channels |
| Receiver Channels | 3 channels | 3 channels | 3 channels | 3 channels |
| ESD Protection | ±15 kV HBM | ±15 kV HBM | ±15 kV HBM | ±15 kV HBM |
主要差異化特點
- Three integrated RS-232 channels reduce external interface-chip count (對比MAX3232CDBR)
- Supports communication at up to 250 kbps (對比MAX3232EEAE+)
- Connector-facing protection is rated to ±15 kV HBM (對比MAX3243CPW)
設計說明
Place the MAX3243CDBRG4 near the RS-232 connector and route each driver and receiver trace as a short, continuous path. Keep these traces away from switching nodes, relay contacts, high-current motor returns, and crystal or clock circuits. Provide a low-impedance ground reference beneath or alongside the interface area, and terminate unused inputs according to the pin-description table in the Texas Instruments MAX3243 datasheet.
Do not treat MAX3243 as a differential RS-422 or RS-485 transceiver. RS-232 is single-ended, and the usable signal reference can shift when connected equipment uses different ground potentials. Confirm the full logic voltage, supply range, channel direction, and connector pin assignment before replacing an existing interface. Also verify that the exact package drawing and pinout of any family variant are identical to the DBR ordering option.
Use a continuous ground-return strategy and appropriate shielded cable to limit noise pickup on long RS-232 links. Keep the transceiver’s supply decoupling close to the supply pins, and route returns from drivers toward the connector ground rather than through digital return paths. Although the device provides ±15 kV HBM ESD protection, system-level surge and ground-bounce protection may still be required for cables exposed to industrial transients.
合規資訊
The commercial-grade MAX3243 is not an automotive-qualified device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations are not stated in the cited material and therefore remain unknown.