MC34118DW - Voice-Switched Speakerphone IC | NXP | 28-SOIC
MPN: MC34118DW ✓ 啟用中MC34118DW 概覽
A voice-switched speakerphone IC is a telephone-network interface device that detects speech activity and controls the direction of audio between the microphone and loudspeaker paths. It eliminates the need for a manually operated push-to-talk control when both parties remain within microphone pickup range. This category of telephone interface IC sits within communication ICs and ultimately within the broader integrated-circuit hierarchy, combining analog signal conditioning, gain control, and telephone-line switching in one package.
The MC34118DW supports telephone-line-powered operation, typically requiring 5.0 mA from the line, as well as operation from a conventional power supply. Its gain in the transmit and receive paths is adjusted externally at the microphone and speaker amplifiers. Component values in the manufacturer datasheet should therefore be treated as starting points, with final gain, stability, and distortion set through prototype measurement in the completed speech network.
The 28-lead SOIC package supports direct Tip and Ring interfacing through a coupling transformer, enabling a compact stand-alone speakerphone implementation. Its architecture is suited to analog telephone terminals, extension speakerphone designs, and featurephones that add a hands-free monitoring function to an existing handset speech network. It can also support two-way monitoring functions where the microphone and loudspeaker paths are controlled automatically according to voice activity.
Important application choices include telephone-line-powered products, externally powered analog phones, and featurephones requiring a dedicated voice-switched monitoring path. The interface is not a general-purpose audio amplifier or DTMF decoder; it is specifically a telephone speech-network controller. Peripheral filtering, the coupling transformer, microphone and speaker amplifiers, and external gain-setting components remain essential parts of a complete implementation.
When laying out a design, place the MC34118DW close to the telephone-network and speech-signal components and keep sensitive microphone inputs away from the loudspeaker drive path. Validate gain, sidetone balance, line-power budget, and stability on the final board because transformer selection and component tolerances strongly influence acoustic performance. Use the pin-description and application-circuit tables in the manufacturer datasheet when assigning PCB tracks.
This page consolidates the verified package and operating details, cross-reference alternatives, and practical design guidance for engineers evaluating the MC34118DW in analog telephony equipment.
直接替換替代品,適用於 MC34118DW — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
IL34118DW
✅ 直接替換📋 參考替代品(不在目錄中)
MC34118DWR2G
✅ 直接替換📋 參考替代品(不在目錄中)
MC34118DW 最大額定值與電氣特性
| Product Type | Voice-switched speakerphone interface IC |
| Application Category | Telecom / analog telephone interface |
| 封裝 | 28-lead SOIC |
| 腳位數 | 28 pins |
| 安裝類型 | Surface mount |
| Powering Method | External supply or telephone-line powered |
| Telephone-Line Current | Typically 5.0 mA |
| Line Interface | Direct Tip and Ring interface through a coupling transformer |
| Compatible Network | Handset speech network and featurephone functions |
| Transmit-Path Gain | Adjusted at the microphone amplifier |
| Receive-Path Gain | Adjusted at the speaker amplifier |
| Component Adjustment | Datasheet values are starting points only |
| Automotive Qualification | Not applicable to this analog telephony interface |
MC34118DW 28-lead soic 腳位配置指南
MC34118DW(28-lead soic 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: MC34118DW.
請參閱 資料表 以查看完整腳位配置。
典型應用
MC34118DW 適用於 6 應用s: Stand-Alone Analog Telephone Speakerphone, Featurephone Hands-Free Monitoring, Analog Extension Speakerphone, Two-Way Telephone Monitoring Terminal, Telephone Conference and Intercom Accessory, Legacy Telephone-Line Interface Upgrade.
Stand-Alone Analog Telephone Speakerphone
The MC34118DW fits a stand-alone analog telephone speakerphone because it can draw typically 5.0 mA from the telephone line and interface directly with Tip and Ring through a coupling transformer. Its voice-switching function controls the microphone and loudspeaker paths automatically, eliminating a manual push-to-talk control. Transmit and receive gains are adjusted at the external microphone and speaker amplifiers, so final acoustic balance must be tuned on the assembled telephone rather than copied from default values.
推薦
Featurephone Hands-Free Monitoring
In a featurephone, the MC34118DW can operate with an existing handset speech network and additional telephone functions while providing automatic control of the monitoring path. This arrangement allows the user to hear the conversation without holding a transmit button. The IC does not replace the phone's line interface or speech amplifiers; it manages voice switching, so microphone, loudspeaker, and sidetone behavior must be validated in the final mechanical and acoustic design.
推薦
Analog Extension Speakerphone
The MC34118DW is suitable for an analog extension speakerphone where a direct Tip and Ring connection is required and a separate local supply may not be practical. Typical telephone-line operation requires 5.0 mA, enabling the interface to be designed around the line power available from the exchange. Designers must still verify line-lightning protection, isolation, transformer selection, and acoustic stability rather than treating the IC as a complete protection or isolation solution.
推薦
Two-Way Telephone Monitoring Terminal
A two-way monitoring terminal can use the MC34118DW to switch audio direction according to voice activity between the telephone line and a local microphone and loudspeaker. The automatic switching behavior removes the need for a sustained push-to-talk control during ordinary conversation. Because transmit and receive gain are set externally, the coupling transformer and surrounding analog components should be matched to the intended acoustic path to prevent feedback and obtain an intelligible conversation.
推薦
Telephone Conference and Intercom Accessory
The MC34118DW can support a conference or intercom accessory that attaches to an analog telephone network and needs automatic switching between the microphone and loudspeaker paths. Its voice-switched operation is more suitable than a basic amplifier for conversational use because it reduces the need for manual switching. The complete circuit also needs a coupling transformer, external speech amplifiers, gain-setting components, and careful layout to prevent acoustic or electrical feedback.
推薦
Legacy Telephone-Line Interface Upgrade
For a legacy telephone product that must retain Tip and Ring operation while modernizing its control behavior, the MC34118DW provides a dedicated voice-switching function in a 28-lead SOIC. It can operate from an existing supply or from the telephone line, depending on the system architecture. When transferring an existing design, compare the external component values, voice-switch timing, and supply limits of the chosen alternative against the original circuit before production release.
推薦
推薦產品摘要
工程參考資料,適用於 MC34118DW — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | IL34118DW | MC34118DWR2G |
|---|---|---|---|
| Brand | NXP Semiconductors | IKSEMI | onsemi |
| Package | 28-lead SOIC | 28-lead SOIC - same package | 28-lead SOIC - same package |
| Product Function | Voice-switched speakerphone IC | Pin-compatible voice-switched IC | Identical voice-switched speakerphone functionality |
| Telephone-Line Interface | Direct Tip and Ring through a coupling transformer | Direct replacement for MC34118DW and U4082 | Identical functionality in the same 28-lead SOIC |
| Assembly Format | DW ordering code | DW ordering code | Enhanced packaging for high-volume assembly |
主要差異化特點
- Direct analog telephone-line operation (對比IL34118DW)
- Established featurephone integration (對比MC34118DWR2G)
- External gain control in both speech directions (對比IL34118DW)
設計說明
Use the pin-description table in the NXP MC34118 datasheet when assigning PCB tracks and keep the sensitive microphone path physically separated from the loudspeaker amplifier output. Place the external gain-setting components close to their associated amplifier connections, and follow the datasheet application circuit for the coupling transformer. This arrangement reduces risk of feedback, crosstalk, and unstable voice-path gain in a telephone product.
If the circuit is powered from the telephone line, budget for the typical 5.0 mA line requirement and confirm that the selected protection and coupling network can support the operating state. If an external supply is used instead, verify the permitted supply range and start-up behavior against the device documentation. Do not infer the external-supply limits from the 3.5 V to 6.5 V figure published for the IL34118DW alternative.
Treat all external resistor and capacitor values as starting points, because transmit and receive gain are adjusted at the microphone and speaker amplifiers. Validate gain, sidetone balance, switching behavior, and stability on the final PCB with the selected transformer, microphone, loudspeaker, and enclosure. Changing a gain component without repeating acoustic testing can produce excessive sidetone, howling, or unintelligible conversation.
合規資訊
This is an analog telephone interface IC rather than an automotive device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not stated in the available product records and must be confirmed with the manufacturer before procurement.