MC9S08JS8LCWJ - 8-bit 48MHz S08 Microcontroller | NXP
MPN: MC9S08JS8LCWJ ✗ 停產MC9S08JS8LCWJ 概覽
A microcontroller is a programmable system-on-chip that combines a CPU core, memory, peripheral interfaces, and I/O in one integrated circuit. The HCS08 S08 core is an 8-bit embedded-processing architecture used in cost-sensitive control systems. Within the component hierarchy, this device is a microcontroller, embedded processor, and programmable logic IC designed to execute firmware while directly monitoring sensors and controlling actuators.
The MC9S08JS8LCWJ provides 48 MHz processing performance, 8 KB of Flash program storage, and USB 2.0 device connectivity in a compact 20-pin SOIC package. Its 8-bit architecture is suitable for human-interface devices, simple data acquisition units, USB peripheral controllers, industrial control modules, and embedded accessories. The 2.7 V to 5.5 V operating range supports both 3.3 V and 5 V system environments.
The S08JS family uses an integrated USB transceiver, reducing the component count of a USB design compared with solutions requiring a separate transceiver. Firmware development is supported by the S08 family toolchain, including the CodeWarrior development environment and a USB bootloader suitable for production programming. The S08 CPU also supports event-driven interrupt handling, timer-based control, serial communication, and general-purpose digital I/O.
Typical uses include a USB-connected control panel, a compact data logger with local USB synchronization, a keyboard or HID interface, an industrial sensor interface, and a small peripheral controller. Because only 8 KB of Flash is available, applications with large protocol stacks, extensive libraries, or complex graphical functions should check the final firmware image size before committing the part to a design.
For PCB design, reserve the 20-pin SOIC footprint and route USB D+ and D- as a controlled-impedance pair to the appropriate pins. Keep the supply decoupling capacitor close to the device, provide a stable clock or crystal arrangement as specified in the family data sheet, and confirm the programming connector, reset circuit, and I/O protection before fabrication.
This page consolidates lifecycle, parametric, drop-in replacement, comparison, and design guidance for the MC9S08JS8LCWJ. It is intended to help engineers evaluate the original S08JS device, identify pin-compatible alternatives, and plan sourcing for designs that must preserve an existing footprint.
直接替換替代品,適用於 MC9S08JS8LCWJ — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: MC9S08JS8LCWJ (相同外形與佔位) — 差異在於 Package, Maximum Clock Frequency, ADC Resolution, Debug Interface, Product Type.
MC9S08JS16LCWJ
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
MC9S08SH8CWJR
✅ 直接替換📋 參考替代品(不在目錄中)
MC9S08SH4CWJ
✅ 直接替換聯絡詢價
查看資料表 →MC9S08SH16MTJ
✅ 直接替換聯絡詢價
查看資料表 →MC9S08JS8LCWJ 最大額定值與電氣特性
| Product Type | 8-bit microcontroller |
| CPU Core | HCS08 S08 core |
| 最大時脈頻率 | 48 MHz |
| Program Memory | 8 KB Flash (8K x 8) |
| USB Interface | USB 2.0 device controller with integrated transceiver |
| Supply Voltage Range | 2.7 V to 5.5 V |
| 工作溫度範圍 | -40°C to +85°C |
| 封裝 | 20-pin SOIC |
| 安裝類型 | Surface mount |
| Series | S08JS |
| Bit Width | 8 bit |
| 生命週期狀態 | End of Life |
MC9S08JS8LCWJ 20-pin soic 腳位配置指南
MC9S08JS8LCWJ(20-pin soic 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: MC9S08JS8LCWJ.
請參閱 資料表 以查看完整腳位配置。
典型應用
MC9S08JS8LCWJ 適用於 6 應用s: USB HID Control Panel, Industrial Sensor Interface, Compact Data Logger, USB-Connected Peripheral Controller, Battery-Powered Maintenance Tool, Embedded Accessory Controller.
USB HID Control Panel
The MC9S08JS8LCWJ fits a compact USB human-interface device because the S08JS family combines an 8-bit HCS08 core with a full-speed USB 2.0 device controller and integrated transceiver. Its 48 MHz clock provides responsive handling of button inputs, status LEDs, and USB enumeration while the 20-pin SOIC package keeps the controller area small. The 8 KB Flash limit requires disciplined firmware sizing, so confirm the compiled image size after including the USB stack and application code.
推薦
Industrial Sensor Interface
The MC9S08JS8LCWJ can serve as the local controller for an industrial sensor module that must combine digital inputs, timers, and a USB service connection. Its 48 MHz S08 core supports event-driven measurement routines, while the 2.7 V to 5.5 V supply range allows deployment in both 3.3 V and 5 V equipment. The -40°C to +85°C rating covers industrial temperature requirements, although input protection, isolation, and calibration must be designed around the external sensor interface.
推薦
Compact Data Logger
The MC9S08JS8LCWJ is suitable for a small USB-synchronized data logger that records sensor events and periodically transfers data to a host computer. The 48 MHz processor allows interrupt-driven sampling and buffering, while USB 2.0 provides a direct wired connection without an external transceiver. Because the device contains only 8 KB of Flash, the application should store large sample buffers in external memory and avoid embedding an oversized logging framework.
推薦
USB-Connected Peripheral Controller
The MC9S08JS8LCWJ can manage a small USB peripheral that coordinates relays, indicators, and a local keypad. Its integrated USB transceiver simplifies the physical interface, and the 20-pin SOIC package preserves a compact board outline. The 8-bit architecture is appropriate for straightforward control logic, but timing-critical functions and communication buffers must be checked against the 8 KB program-memory limit before the firmware is finalized.
推薦
Battery-Powered Maintenance Tool
The MC9S08JS8LCWJ supports a compact handheld maintenance accessory that combines a USB service port with simple sensor monitoring. Its 2.7 V minimum operating voltage provides flexibility for 3.3 V system rails, and the -40°C to +85°C range covers demanding service environments. The designer should still verify USB operating requirements at reduced supply voltage and budget power carefully because the device is an end-of-life component with constrained long-term sourcing visibility.
推薦
Embedded Accessory Controller
The MC9S08JS8LCWJ is appropriate for an accessory controller that uses USB for configuration and exposes simple digital control outputs to a host system. The 48 MHz S08 core can handle protocol servicing and real-time output updates within a compact 20-pin SOIC footprint. Application development should use the NXP S08 programming toolchain and confirm boot, clock, and USB configuration against the MC9S08JS16 Series Data Sheet before production programming.
推薦
推薦產品摘要
工程參考資料,適用於 MC9S08JS8LCWJ — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MC9S08JS16LCWJ | MC9S08SH8CWJR | MC9S08SH4CWJ | MC9S08SH16MTJ |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 20-pin SOIC | 20-pin SOIC | 20-pin SOIC | 20-pin SOIC | 20-pin SOIC |
| CPU Architecture | 8-bit HCS08 S08 core | 8-bit HCS08 S08 core | HCS08 S08 SH family | HCS08 S08 SH family | HCS08 S08 SH family |
| Flash Memory | 8 KB | 16 KB | 8 KB | 4 KB | 16 KB |
| USB 2.0 Device Function | Yes, with integrated transceiver | Yes, with integrated transceiver | No confirmed USB parity | No confirmed USB parity | No confirmed USB parity |
主要差異化特點
- Exact original 8 KB configuration (對比MC9S08JS16LCWJ)
- Integrated full-speed USB 2.0 device function (對比MC9S08SH8CWJR)
- Higher performance class within the original family (對比MC9S08SH4CWJ)
- Original package and memory-density alignment (對比MC9S08SH16MTJ)
設計說明
Route USB D+ and D- as a short, continuous, controlled-impedance pair, with a common return path beneath the pair and minimal stubs to test points. Keep the USB transceiver support network and decoupling components close to their associated pins according to the MC9S08JS16 Series Data Sheet. Avoid placing noisy switching regulators, crystal loops, or long parallel traces between the transceiver and the USB connector.
Place the required supply bypass capacitor immediately across the MCU supply pins, with the ground connection using the shortest practical return path. Verify the 2.7 V to 5.5 V operating range against the actual rail tolerance and startup behavior. A 3.3 V rail is within the specified range, but USB operating-mode requirements, peripheral output limits, and connected interface levels must also be checked before committing the design.
Do not treat a shared 20-pin SOIC outline as proof of drop-in compatibility. Review the pin-description table for power pins, oscillator functions, reset, programming signals, USB, and multiplexed I/O in each candidate. Because the device is end of life and several alternatives belong to different S08 subfamilies, validate the compiled firmware, clock settings, peripheral mapping, and boot behavior before authorizing substitution.
Reserve the programming and debug interface even if production programming uses a bootloader. Keep sensitive reset and clock nets away from USB differential routing and noisy peripherals. Check every exposed test point for signal-integrity or ESD exposure, particularly on externally accessible USB and connector pins. Follow the recommended ground-plane arrangement in the family data sheet to minimize return-path discontinuities.
合規資訊
NXP identifies the MC9S08JS8LCWJ as end of life. RoHS, REACH, halogen-free, lead-free, conflict-minerals, and AEC-Q100 status require confirmation from the current manufacturer product documentation or lot-specific records.