MC9S08LL16CLH - 20MHz 8-Bit 16KB MCU | NXP | 64-LQFP
MPN: MC9S08LL16CLH ✗ 停產MC9S08LL16CLH 概覽
An 8-bit MCU is a microcontroller whose central processing unit, memory, and peripherals are integrated on one semiconductor device. The S08 family belongs to the HCS08 architecture, a cost-oriented 8-bit processor family widely used for control, metering, keypad, display, and simple sensing systems. The MC9S08LL16 family combines that compact processing platform with Flash memory for firmware storage and RAM for working data.
The MC9S08LL16CLH operates at up to 20 MHz and provides 16 KB, or 16K x 8 bits, of Flash memory alongside 2 KB of RAM. Its integrated LCD driver supports cost-effective segmented or dot-matrix display interfaces, while the internal oscillator reduces reliance on an external clock source. Low-power modes are useful in portable equipment where average energy consumption matters more than continuous processing speed.
Within the S08 product hierarchy, this device balances Flash capacity, clock performance, and package size. The 64-LQFP package provides 64 external leads and a 10 x 10 mm body, offering more I/O than smaller packages while remaining practical for compact control boards. The MC9S08LL16CLH is a temperature- and package-specific orderable version; board designers should therefore confirm its complete suffix and pin assignments against the manufacturer datasheet.
Typical uses include utility meters, small appliance controllers, portable instruments, simple keypads, sensor interfaces, and battery-operated products with local displays. An LCD-driven meter, for example, can use the integrated display driver and internal timing resources while retaining Flash for application firmware. A compact appliance controller can likewise use the dedicated I/O and low-power modes to reduce external component count.
Design should begin with the 64-LQFP land pattern and the exact MC9S08LL16CLH pin description. Preserve the required supply bypass capacitors close to the power pins, route sensitive oscillator and reset connections away from fast-switching nodes, and confirm programming, clock, and LCD timing against the manufacturer datasheet. Because the part is end-of-life, new designs should also account for availability and long-term product-change risk.
This product record combines the manufacturer data sheet, official lifecycle information, package characteristics, and documented related-device comparisons. It also distinguishes verified same-package candidates from alternatives that require software, peripheral, or board-level changes, helping engineers assess replacement risk before committing a design to an end-of-life microcontroller.
直接替換替代品,適用於 MC9S08LL16CLH — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: MC9S08LL16CLH (相同外形與佔位) — 差異在於 Data Bus Width, Package, Pin Count, ADC, Core.
MC9S08LL36CLH
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
MC9S08LG16CLH
✅ 直接替換聯絡詢價
查看資料表 →MC9S08LL16CLH 最大額定值與電氣特性
| CPU Architecture | 8-bit HCS08 |
| Maximum CPU Frequency | 20 MHz |
| Flash Program Memory | 16 KB (16K x 8 bits) |
| RAM | 2 KB |
| 資料匯流排寬度 | 8 bits |
| Minimum Stated CPU Supply Voltage | 1.8 V across temperature range |
| Integrated Display Support | Built-in LCD driver |
| Clock Source | Internal oscillator |
| Low-Power Modes | Supported |
| Package Type | 64-LQFP (10 x 10 mm) |
| 腳位數 | 64 pins |
| 安裝類型 | Surface mount |
| Series | S08LL |
| Instruction Set | HCS08 instruction set |
| Product Lifecycle Status | End of Life |
MC9S08LL16CLH 64-lqfp (10 x 10 mm) 腳位配置指南
MC9S08LL16CLH(64-lqfp (10 x 10 mm) 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: MC9S08LL16CLH.
請參閱 資料表 以查看完整腳位配置。
典型應用
MC9S08LL16CLH 適用於 6 應用s: LCD Utility Meter, Portable Sensor Interface, Small Appliance Controller, Battery-Powered Instrument, Simple Keypad and Menu Interface, Low-Power Embedded Control.
LCD Utility Meter
The MC9S08LL16CLH fits an LCD utility meter because it combines a 20 MHz 8-bit processor, 16 KB of Flash, 2 KB of RAM, and a built-in LCD driver. Firmware can manage sensor readings, measurement timing, keypad input, and local display updates while keeping the external circuit count low. The internal oscillator also simplifies entry-level designs, although an external precision clock may be needed when regulatory metrology or communication timing requires tighter accuracy. Before layout release, verify the LCD segment assignments, supply requirements, and all 64 package connections against the manufacturer data sheet.
推薦
Portable Sensor Interface
The MC9S08LL16CLH is suitable for a compact, battery-powered sensor interface that must gather measurements and respond locally. Its 20 MHz HCS08 CPU provides ample speed for modest sampling, filtering, thresholding, and actuator-control tasks, while 16 KB of Flash stores application firmware and 2 KB of RAM supports working state. Low-power modes can reduce consumption between measurements, while the internal oscillator can simplify the clocking arrangement. For designs requiring greater firmware headroom, evaluate MC9S08LL36CLH and confirm peripheral and pin compatibility before migration.
推薦
Small Appliance Controller
The MC9S08LL16CLH can serve as the primary controller in a small appliance where a keypad, display, relay, and several sensors must be coordinated. Its 8-bit S08 core is appropriate for deterministic supervisory control, and the 16 KB Flash capacity can hold application logic plus lookup or configuration data. The integrated LCD driver supports local human feedback, while low-power modes help reduce standby consumption. Because the part is end of life, it is most appropriate for an existing appliance platform; new programs should compare the S08LL36CLH and S08LG16CLH for firmware capacity and clock-speed requirements.
推薦
Battery-Powered Instrument
The MC9S08LL16CLH is well matched to a portable instrument that combines local data entry, a small display, and periodic external measurements. The processor can perform control functions at up to 20 MHz, while 16 KB of Flash provides a practical code budget and 2 KB of RAM supports short-lived working data. Low-power operating modes are especially useful between user interactions or measurement events, and the integrated oscillator can reduce component count. Validate clock accuracy and display timing against the operating requirements, then use the Request a Quote form to assess remaining supply for the required production volume.
推薦
Simple Keypad and Menu Interface
The MC9S08LL16CLH can implement a keypad-driven menu or terminal interface without a separate display controller when the system includes a compatible LCD. Its 20 MHz processing rate supports responsive debouncing, menu navigation, state management, and communication tasks, while 16 KB of Flash and 2 KB of RAM are appropriate for embedded human-machine interfaces. The integrated LCD driver and internal oscillator reduce the number of external components and simplify board space. A firmware migration to MC9S08LL36CLH may help when menus and configuration data exceed the available program space, subject to a full pinout and peripheral audit.
推薦
Low-Power Embedded Control
The MC9S08LL16CLH is appropriate for a low-power embedded controller that performs periodic measurement, local decision-making, and actuator updates. Its low-power modes can reduce activity between events, while the internal oscillator avoids making a crystal mandatory in every configuration. The 8-bit HCS08 processor and 20 MHz maximum clock are suitable for straightforward embedded tasks rather than high-bandwidth control. If firmware growth, clock margin, or long-term supply drives a redesign, compare MC9S08LL36CLH for added Flash and MC9S08LG16CLH for increased processing speed, while verifying software compatibility.
推薦
推薦產品摘要
工程參考資料,適用於 MC9S08LL16CLH — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MC9S08LL36CLH | MC9S08LG16CLH |
|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 64-LQFP (10x10) | 64-LQFP (10x10) | 64-LQFP (10x10) |
| CPU Architecture | 8-bit HCS08 | 8-bit HCS08 | 8-bit HCS08 |
| Maximum CPU Frequency | 20 MHz | 20 MHz | 40 MHz |
| Flash Program Memory | 16 KB | 36 KB | 18 KB |
| Data Bus Width | 8 bits | 8 bits | 8 bits |
主要差異化特點
- Lower-clock S08LL implementation with targeted Flash capacity (對比MC9S08LG16CLH)
- More Flash capacity within the S08LL family (對比MC9S08LL36CLH)
- Integrated display and clock resources for compact instruments (對比MC9S08LG16CLH)
設計說明
Use the exact 64-LQFP 10 x 10 mm land pattern defined for MC9S08LL16CLH and verify every net against the manufacturer pin-description table before releasing artwork. Place required supply capacitors adjacent to the power and ground pins, with short and symmetrical return paths. Do not infer pin functions solely from position because power, ground, oscillator, reset, LCD, and multiplexed I/O assignments must follow the specific package variant.
Select the operating mode, clock source, LCD configuration, and I/O state to match the product's battery-life target. The MC9S08LL16CLH includes low-power modes and an internal oscillator, but quiescent and active consumption still depend on supply voltage, enabled peripherals, and firmware behavior. Measure the complete board rather than relying only on MCU mode labels, and include brownout behavior and external load current in the power-budget calculation.
Do not treat a shared 64-LQFP outline as proof that any S08 device is a direct substitution. Before using MC9S08LL36CLH or MC9S08LG16CLH, compare the pin-mux table, power pins, reset behavior, oscillator connections, LCD functions, timer and serial peripheral mapping, memory map, and startup code. The 40 MHz rating of MC9S08LG16CLH and larger Flash of MC9S08LL36CLH can change firmware and board assumptions even when the package dimensions match.
合規資訊
The official product page identifies the MC9S08LL16CLH as end of life. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from NXP.