MC9S08PA4MTG - 8-Bit 20MHz 5V MCU with EEPROM | NXP
MPN： MC9S08PA4MTG ✓ 啟用中MC9S08PA4MTG 概覽
An 8-bit microcontroller is a programmable semiconductor integrating a CPU, memory, and peripherals into one device. The S08 core belongs to the broader microcontroller and embedded-processor hierarchy, combining compact code execution with dedicated analog, timing, communication, and data-storage functions. The MC9S08PA4MTG extends this architecture with EEPROM, ADC, analog comparator, and motor-control flex timer blocks, reducing the number of external components required in cost-sensitive embedded products.
The 20 MHz maximum bus speed supports faster control-loop execution than slower general-purpose 8-bit devices. The 4 KB flash program memory provides space for firmware, while integrated EEPROM supports nonvolatile data retention. The ADC and analog comparator allow the device to monitor analog inputs and implement threshold decisions without relying exclusively on an external sensing circuit.
The S08PA family supports as many as 40 interrupt and reset sources and up to four levels of nested interrupts. This interrupt structure helps software prioritize time-sensitive motor-control events, timer activity, and external conditions. The motor-control flex timer consolidates timing functions needed for motor-drive and other periodic-control systems, reducing firmware complexity and peripheral duplication.
Typical uses include small motor controllers, appliance controls, industrial sensing modules, and compact consumer products operating from a 5 V rail. The 16-pin TSSOP package supports surface-mount assembly, while the 2.7 V to 5.5 V operating range provides flexibility across 3.3 V and 5 V systems. Firmware development can build on the established S08 core and related development tools.
Designers should review the MC9S08PA4 data sheet for the exact pin functions, electrical limits, timing values, and peripheral configuration. In particular, ADC sampling, timer pin assignments, oscillator options, and the supply current of unused peripherals must be checked against the target application before finalizing the PCB and firmware.
This page consolidates the manufacturer specification, package information, sourcing details, and practical application guidance for MC9S08PA4MTG. It also distinguishes documented device characteristics from parameters requiring an engineering decision, helping teams evaluate the MCU before schematic capture, firmware development, and production sourcing.
直接替換替代品，適用於 MC9S08PA4MTG — 相同封裝，腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此產品無可直接替換的替代品。
申請替代品MC9S08PA4MTG 最大額定值與電氣特性
| Product Type | 8-bit S08 microcontroller |
| Maximum Bus Frequency | 20 MHz |
| Supply Voltage Range | 2.7 V to 5.5 V |
| Nominal Supply Voltage | 5 V |
| Flash Memory | 4 KB |
| Program Memory Organization | 4K x 8 bits |
| EEPROM | Integrated |
| Analog-to-Digital Converter | Integrated |
| Analog Comparator | Integrated |
| Motor Control Flex Timer | Integrated |
| Interrupt and Reset Sources | Up to 40 sources |
| Nested Interrupt Levels | Up to 4 levels |
| 封裝 | 16-pin TSSOP |
| 安裝類型 | Surface mount |
MC9S08PA4MTG 16-pin tssop 腳位配置指南
MC9S08PA4MTG（16-pin tssop 封裝）的腳位配置。 此數位 IC 包含 GPIO、通訊介面（UART、SPI、I2C）與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料： MC9S08PA4MTG.
請參閱 資料表 以查看完整腳位配置。
典型應用
MC9S08PA4MTG 適用於 6 應用s: Compact DC Motor Controller, Appliance Control Module, Industrial Sensing Node, Small Fan and Pump Controller, Consumer Accessory Controller, Cost-Sensitive 5 V Embedded System.
Compact DC Motor Controller
The MC9S08PA4MTG fits compact DC motor-control systems because its 20 MHz maximum bus frequency supports responsive control-loop execution while the integrated motor-control flex timer handles periodic timing functions. The ADC can sample command or feedback signals, and the analog comparator can perform threshold decisions without adding separate analog components. With 4 KB of flash, the device is best suited to compact controllers with modest firmware requirements. Designers should confirm timer-channel allocation, motor-drive topology, current limits, and protection requirements against the NXP MC9S08PA4 data sheet before committing the 16-pin TSSOP layout.
推薦
Appliance Control Module
The MC9S08PA4MTG is appropriate for appliance-control modules that combine digital sequencing with limited analog supervision. Its 8-bit S08 CPU and 20 MHz maximum bus frequency provide adequate performance for valve, motor, relay, and user-interface control logic, while 4 KB of flash constrains the application to a compact firmware image. The integrated ADC and analog comparator can monitor supply, temperature-sensor interfaces, or threshold inputs. The 16-pin TSSOP package supports dense surface-mount assemblies, although pin multiplexing and the final I/O count must be checked in the manufacturer pin description table.
推薦
Industrial Sensing Node
The MC9S08PA4MTG can serve as the controller in a small industrial sensing node that converts a limited number of analog inputs into digital measurements or control actions. Its ADC removes the need for a separate conversion IC, while the analog comparator provides a simple hardware threshold path. The 2.7 V to 5.5 V operating range allows deployment from 3.3 V to 5 V rails, and integrated EEPROM can retain configuration values. For field deployments, verify the specified operating-temperature range, ADC accuracy, reset behavior, watchdog configuration, and communication requirements before using the 4 KB flash device.
推薦
Small Fan and Pump Controller
The MC9S08PA4MTG is suitable for small fan and pump controllers where speed commands, fault detection, and timing functions must be coordinated in one compact device. Its motor-control flex timer provides dedicated timing resources, while the ADC can monitor a speed-control or feedback signal. At 20 MHz maximum bus frequency, the S08 core can execute control and fault-handling logic efficiently, although the 4 KB flash limit favors concise firmware. Firmware should include startup and stall handling, and the hardware design must provide suitable drive transistors, protection, and current margins beyond the MCU itself.
推薦
Consumer Accessory Controller
The MC9S08PA4MTG fits low-cost consumer accessories that require local control, nonvolatile configuration, and a few analog inputs without a high-pin-count processor. The 16-pin TSSOP package helps reduce board area, and the integrated EEPROM avoids a separate nonvolatile-memory IC for small configuration blocks. Its 8-bit architecture and 20 MHz maximum bus frequency are appropriate for straightforward button, sensor, LED, and actuator management. Product developers should keep firmware within the 4 KB program-memory limit, disable unused analog and timer blocks where practical, and confirm ESD, environmental, and lifecycle requirements for the intended consumer channel.
推薦
Cost-Sensitive 5 V Embedded System
The MC9S08PA4MTG targets cost-sensitive embedded systems built around a nominal 5 V rail. Its S08 core, 4 KB flash, EEPROM, ADC, comparator, and motor-control flex timer consolidate several functions that might otherwise require separate discrete components. The 2.7 V to 5.5 V supply range also allows operation from 3.3 V when the associated electrical and analog specifications remain acceptable. For a new design, check peripheral utilization, interrupt priority, timer resources, and code growth during prototype development so that the selected MCU still meets functional requirements after fault-handling and production features are added.
推薦
推薦產品摘要
工程參考資料，適用於 MC9S08PA4MTG — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 |
|---|---|
| Manufacturer | NXP Semiconductors |
| Package | 16-pin TSSOP |
| CPU Architecture | 8-bit S08 central processor unit |
| Maximum Bus Frequency | 20 MHz |
| Supply Voltage Range | 2.7 V to 5.5 V |
| Flash Memory | 4 KB |
| Integrated EEPROM | Yes |
| ADC | Integrated |
| Analog Comparator | Integrated |
| Motor-Control Flex Timer | Integrated |
| Interrupt and Reset Sources | Up to 40 sources |
| Nested Interrupt Levels | Up to 4 levels |
設計說明
Budget the supply rail for the S08 CPU, active analog blocks, timer outputs, and external I/O rather than the MCU core alone. Disable unused ADC channels, comparators, and timer modules where firmware support permits, and confirm the operating mode against the NXP MC9S08PA4 data sheet. The 2.7 V to 5.5 V input range supports both 3.3 V and 5 V systems, but peripheral accuracy and current consumption must be checked at the actual rail voltage.
Place decoupling capacitors close to the MCU power pins and route high-current switching or motor-drive outputs away from sensitive analog inputs. The integrated ADC and analog comparator do not remove the need for careful grounding, trace routing, and input-source impedance analysis. Review the recommended application circuit, decoupling values, exposed routing requirements, and pin multiplexing in the manufacturer datasheet before releasing the PCB layout.
Do not select this MCU solely from its 20 MHz maximum bus frequency or 4 KB flash figure. Verify the complete peripheral set, RAM requirement, GPIO availability, timer channels, communication interfaces, and package pin multiplexing needed by the product. Use the NXP pin-description table when assigning multiplexed functions, and ensure interrupt-handler priority and nested-interrupt assumptions match the firmware architecture.
For analog measurements, use short traces, maintain a quiet return path, and keep switching-node copper and high-current motor wiring separated from ADC and comparator inputs. If the analog source has high output impedance, account for acquisition time and input leakage in firmware timing. The manufacturer data sheet should be used to determine source-impedance limits, acquisition requirements, and any recommended external filtering.
合規資訊
No specific compliance declaration was identified in the available product information. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status with NXP for the exact ordering code before incorporating the part into a controlled production design.