Microchip Technology

MCP6054-E/SL - Quad 1.8V Precision Op Amp | Microchip

MPN: MCP6054-E/SL ✓ 啟用中
1.8 V Vdss Approximately 30 µA per amplifier Id 14-pin SOIC Package
MOQ: 1 |

MCP6054-E/SL 概覽

The Microchip Technology MCP6054-E/SL is a quad, precision CMOS operational amplifier that operates from 1.8 V and provides rail-to-rail input and output capability in a 14-pin SOIC package. Its headline characteristics include a 300 kHz gain-bandwidth product, low input offset voltage of ±150 µV maximum, and low quiescent current of approximately 30 µA per amplifier. These features make the device suitable for low-voltage instrumentation, sensor processing, and battery-powered measurement systems.

An operational amplifier is an amplifier IC that uses high-gain internal feedback to amplify small voltage differences. A rail-to-rail input stage accepts input voltages close to the positive and negative supply rails, while a rail-to-rail output stage can approach those rails under suitable load and output conditions. The MCP6054-E/SL belongs to the broader hierarchy of operational amplifier, analog amplifier IC, signal-conditioning IC, and power-management-sensitive semiconductor.

The quad configuration places four amplifiers in one package, reducing board area in designs requiring multiple channels. Its 1.8 V minimum supply operation supports low-energy systems, while the 300 kHz gain-bandwidth product is appropriate for precision signal conditioning rather than high-speed waveform or communications applications. The ±150 µV maximum input offset voltage supports accurate measurements around a defined reference level, and the approximately 30 µA operating current supports battery-operated equipment.

The device is unity-gain stable, allowing it to be used directly in voltage-follower configurations without external compensation. Rail-to-rail inputs improve usable signal range in single-supply systems where inputs can move near ground. Designers should still account for input common-mode behavior, output swing under load, noise, and stability when driving capacitive loads. Because this is a precision, low-speed amplifier, its applications emphasize current-to-voltage conversion, buffering, differential sensing, and general closed-loop amplification rather than wideband data conversion.

Typical uses include battery-powered sensor interfaces, industrial measurement systems, portable medical instrumentation, low-level signal conditioning, voltage buffering, and current sensing. In each case, the combination of four channels, low supply voltage, low offset voltage, and low operating current supports compact analog front ends. The common 14-pin SOIC package also simplifies assembly where a through-hole package is preferred over a fine-pitch surface-mount option.

The principal design consideration is ensuring that each amplifier remains stable in its selected feedback network and that the output stays within the practical output-swing limits for the selected supply voltage and load. Decoupling capacitors should be placed close to the supply pins, signal traces should avoid nearby switching nodes, and unused amplifier inputs should be tied to a defined potential rather than left floating. Verify these conditions against the manufacturer datasheet for the exact operating voltage and load.

This page consolidates the confirmed MCP6054-E/SL electrical attributes, package information, sourcing records, and engineering trade-offs into a compact design reference. It also distinguishes confirmed parameters from specifications that require datasheet confirmation, helping engineers assess fit before beginning a precision, low-voltage analog design.

直接替換替代品,適用於 MCP6054-E/SL — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此產品無可直接替換的替代品。

申請替代品

MCP6054-E/SL 最大額定值與電氣特性

Amplifier Type Quad precision operational amplifier
Number of Channels 4 channels
Minimum Supply Voltage 1.8 V
Gain-Bandwidth Product 300 kHz
Input Offset Voltage ±150 µV maximum
靜態電流 Approximately 30 µA per amplifier
Input Common-Mode Range Rail-to-rail input
Output Swing Rail-to-rail output
Gain Stability Unity-gain stable
封裝 14-pin SOIC
安裝類型 Surface mount
Technology CMOS
Extended Temperature Grade E temperature grade
生命週期狀態 Active
RoHS 狀態 Compliant
ECCN EAR99

MCP6054-E/SL 14-pin soic 腳位配置指南

MCP6054-E/SL(14-pin soic 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。

MCP6054-E/SL 的 14-pin soic 封裝腳位圖

無詳細腳位定義資料: MCP6054-E/SL.

請參閱 資料表 以查看完整腳位配置。

典型應用

MCP6054-E/SL 適用於 6 應用s: Battery-Powered Sensor Conditioning, Industrial Current Sensing, Portable Medical Instrumentation, Low-Level Voltage Buffering, Precision Bridge Measurement, Portable Test and Measurement.

🔋

Battery-Powered Sensor Conditioning

The MCP6054-E/SL fits low-voltage sensor front ends that require several conditioned channels without a large analog package. Its 1.8 V minimum operating voltage supports energy-conscious systems, while the ±150 µV maximum input offset voltage helps preserve small sensor signals. Four amplifiers in one 14-pin SOIC can provide buffering, gain, level shifting, and active filtering functions. The approximately 30 µA operating current is important when the design must conserve battery energy. Configure each amplifier according to the manufacturer application guidance, provide local supply decoupling, and keep sensitive input traces away from switching circuitry.

🏭

Industrial Current Sensing

The MCP6054-E/SL is applicable to industrial current-measurement circuits that amplify low differential voltages around a biased common-mode voltage. The ±150 µV maximum offset specification supports accurate measurement near midscale, and rail-to-rail inputs improve usable range in compact single-supply systems. Four channels allow a board to combine current sensing with reference buffering or auxiliary signal conditioning. The 300 kHz gain-bandwidth product is sufficient for many slowly changing process-control signals rather than high-bandwidth protection systems. Keep shunt and amplifier routing compact, use an appropriate differential topology, and verify common-mode and output-swing limits against the selected excitation.

💊

Portable Medical Instrumentation

MCP6054-E/SL can support compact, low-power medical monitoring front ends when the required bandwidth and precision fall within the amplifier's ratings. Its 1.8 V operating capability and approximately 30 µA operating current suit battery-operated diagnostic and monitoring equipment. The four-channel arrangement can buffer multiple electrodes or sensor outputs while conserving board area, and the ±150 µV maximum input offset voltage helps reduce systematic measurement error. Designers should verify noise, settling behavior, input protection, isolation requirements, and applicable medical-system standards; the amplifier itself does not establish system compliance.

🔧

Low-Level Voltage Buffering

The MCP6054-E/SL is appropriate where a high-impedance source must drive a subsequent analog stage without materially loading the source. It is unity-gain stable, allowing each channel to operate as a direct voltage follower, while its ±150 µV maximum offset voltage limits the DC error introduced by the buffer stage. Rail-to-rail inputs are advantageous for signals near ground in single-supply systems. Place the amplifier close to the source, maintain a short feedback path, observe the recommended output-load restrictions, and verify that the 300 kHz gain-bandwidth product is adequate for the signal and settling-time requirements.

🌡️

Precision Bridge Measurement

MCP6054-E/SL can be used in precision bridge and resistive-sensor measurement circuits when slow, low-level signals favor offset accuracy over high bandwidth. Its ±150 µV maximum input offset voltage helps minimize errors around the bridge's midscale output, and the 1.8 V minimum supply supports compact low-voltage instrumentation. Multiple amplifier channels can support excitation buffering, output amplification, and reference conditioning. The 300 kHz gain-bandwidth product is appropriate for many temperature, pressure, and force-sensing systems. The design must still account for common-mode range, resistor mismatch, input bias current, excitation drift, and sensor-specific filtering.

🖥️

Portable Test and Measurement

MCP6054-E/SL is suitable for compact handheld or portable measurement equipment requiring several precision analog channels. The device combines a 14-pin SOIC package, 1.8 V operation, approximately 30 µA operating current, and a 300 kHz gain-bandwidth product in one quad amplifier. Engineers can use the channels for input conditioning, active filtering, buffering, and gain stages around sensors or low-frequency probes. Its low offset voltage is advantageous for millivolt-level measurements. Confirm the input range, output swing, noise performance, settling requirements, and exposed-noise environment, and use the manufacturer pin and application diagrams to preserve correct feedback and decoupling arrangements.

What is the operating voltage of MCP6054-E/SL?
The MCP6054-E/SL operates down to 1.8 V, allowing it to support low-voltage and battery-powered analog systems. According to the Microchip manufacturer datasheet, the device belongs to the MCP6054 family of low-power, precision CMOS operational amplifiers with rail-to-rail inputs and outputs. Use the datasheet electrical characteristics table to confirm the maximum supply voltage, shutdown behavior, and operating limits for the selected ambient temperature before finalizing the power architecture.
What are the key specifications of MCP6054-E/SL that engineers should know?
The MCP6054-E/SL is a four-channel, 1.8 V-capable precision CMOS operational amplifier with a 300 kHz gain-bandwidth product, rail-to-rail inputs and outputs, and a maximum input offset voltage of ±150 µV. The Microchip manufacturer datasheet identifies the device as unity-gain stable and indicates approximately 30 µA operating current for this low-power family. Its 14-pin SOIC package provides four amplifiers in a compact surface-mount assembly.
Where can I download the MCP6054-E/SL datasheet PDF?
The MCP6054-E/SL datasheet is available through the Microchip product documentation listed on the Octopart datasheet page. According to the manufacturer datasheet, the document covers the 30 µA high-precision operational-amplifier family, including electrical characteristics, pin configurations, and application information. Download the official PDF from Microchip when possible, and confirm that the document revision matches the ordering information and package designation used in your design.
Where can I find the MCP6054-E/SL pinout?
The MCP6054-E/SL uses a 14-pin SOIC package, and its complete numbered pin assignment is shown in the Microchip manufacturer datasheet. Use the pin-description and package drawings to identify each amplifier's input, output, supply, and ground connections before assigning PCB tracks. The searchable product documentation at the Octopart datasheet link provides access to the corresponding device document.
What can replace MCP6054-E/SL on the same PCB?
No verified cross-manufacturer, pin-for-pin replacement for MCP6054-E/SL is established by the available cross-reference records. The device is a 14-pin SOIC quad amplifier with rail-to-rail operation, a 300 kHz gain-bandwidth product, and ±150 µV maximum input offset voltage. A candidate must match those electrical limits and the complete 14-pin wiring before it can be treated as a true drop-in replacement rather than merely a similar amplifier.
Is MCP6054-E/SL the same as MCP6054T-E/SL?
MCP6054T-E/SL belongs to the same MCP6054 family, but the order-code suffix generally identifies a different shipment format from the MCP6054-E/SL catalog entry. The distinction is not an electrical drop-in advantage: engineers replacing one orderable MPN with the other should verify the manufacturer's packing code, pin configuration, temperature grade, and reel or tube requirements. The comparison listings confirm family similarity but do not by themselves establish identical ordering or packaging.
MCP6054-E/SL vs MCP6074T-E/ST — which is better for precision sensing?
MCP6054-E/SL is generally the closer choice for precision sensing when low offset voltage and low operating current are priorities, because its specified offset is ±150 µV maximum and it is identified as a 300 kHz precision amplifier. MCP6074T-E/ST is a different family position and should be selected for designs requiring its higher-speed characteristics. According to the Microchip manufacturer datasheets, the complete electrical comparison must be made before substituting one amplifier for the other.
MCP6054-E/SL vs MCP6054-E/ST — can I substitute one for the other?
MCP6054-E/SL and MCP6054-E/ST are closely related MCP6054 catalog entries, but the suffix may change the authorized shipment format rather than the core amplifier function. A substitution should therefore be approved only after confirming the package, temperature grade, dimensional drawing, and packing method against the Microchip manufacturer datasheet and ordering information. For drop-in PCB use, electrical function and every numbered pin assignment are the essential criteria; logistics alone should not drive the decision.
When should I choose MCP6054-E/SL over a higher-speed amplifier?
Choose MCP6054-E/SL when the application requires low-voltage precision rather than wideband speed. Its 1.8 V operation, ±150 µV maximum offset voltage, approximately 30 µA operating current, and 300 kHz gain-bandwidth product suit low-level sensor conditioning and battery-powered instrumentation. Select a higher-speed amplifier only when its added bandwidth is necessary and its noise, offset, power, and stability characteristics are acceptable for the target signal.
Is MCP6054-E/SL suitable for battery-powered sensor interfaces?
Yes, MCP6054-E/SL is suitable for many battery-powered sensor interfaces because it operates down to 1.8 V and belongs to a family characterized by approximately 30 µA operating current. The ±150 µV maximum input offset voltage is also useful when amplifying small sensor outputs. Actual suitability depends on the sensor output range, required accuracy, noise bandwidth, load current, and the number of continuously active amplifier channels.
Can MCP6054-E/SL be used as a unity-gain buffer?
Yes, MCP6054-E/SL is unity-gain stable and can be configured as a voltage follower by connecting the output directly to the inverting input. This configuration is useful for buffering high-impedance sensor outputs before an ADC or downstream measurement circuit. According to the Microchip manufacturer datasheet, stability still depends on the feedback layout and load, so follow the recommended application circuit and verify capacitive-load behavior.
Where can I buy MCP6054-E/SL online?
Use the Request a Quote form on this page to request MCP6054-E/SL pricing, stock confirmation, minimum order quantity, and current lead time. The form allows the request to be matched to the exact MCP6054-E/SL order code and its 14-pin SOIC packaging. Confirm lifecycle status and delivery information when the quotation is returned, especially if the production schedule requires a large or long-running quantity.
What is the price of MCP6054-E/SL?
Use the Request a Quote form on this page for the current MCP6054-E/SL price and quantity breaks. Market pricing can vary with order quantity, inventory, and shipment format, so a general catalog price does not establish the cost for a specific production or prototype order. The quote request should identify the exact MPN, required quantity, tube or reel preference, target date, and delivery location.
Is MCP6054-E/SL in stock and what is its lead time?
Submit the Request a Quote form on this page to obtain a current stock and lead-time confirmation for MCP6054-E/SL. The manufacturer lists the part as active, and distributor records include stocked and orderable listings, but availability can change with purchasing volume and packaging. Provide the required quantity and target delivery date so the quotation reflects the actual procurement schedule.
What is the best Microchip equivalent for MCP6054-E/SL?
The closest verified Microchip-family starting point is MCP6054T-E/SL, which appears in direct comparison records with MCP6054-E/SL and shares the family identification. However, an equivalent for production use must be checked for identical electrical ratings, temperature grade, pinout, and packing code. The Microchip cross-reference search is the appropriate tool for confirming an authorized manufacturer substitution before treating it as a drop-in part.
What precision and speed does MCP6054-E/SL provide?
MCP6054-E/SL combines a maximum input offset voltage of ±150 µV with a 300 kHz gain-bandwidth product, positioning it as a precision, low-speed CMOS amplifier rather than a high-speed communications device. According to the Microchip manufacturer datasheet, rail-to-rail input and output stages improve signal range in low-voltage systems. For slower temperature sensing, bridge excitation, or current sensing, its accuracy and power characteristics are generally more relevant than bandwidth alone.

工程參考資料,適用於 MCP6054-E/SL — 比較、設計指引及合規資訊。

選型指南

Choose MCP6054-E/SL for compact, low-voltage analog systems that prioritize low offset voltage, low operating current, and multiple precision channels. It is particularly appropriate for battery-powered sensors, bridge measurements, portable monitoring equipment, buffering, and slow signal conditioning where the 300 kHz gain-bandwidth product is sufficient. Select a higher-bandwidth amplifier when waveform fidelity or fast settling is the dominant requirement. Before ordering a replacement, verify the complete 14-pin pinout, supply limits, common-mode range, output swing, temperature grade, and packing method. The MCP6054T-E/SL family member can serve as a starting point for a Microchip-family comparison, but an order-code suffix must not be assumed to represent a true drop-in substitute. No cross-manufacturer replacement should be selected until its electrical ratings and pin assignments have been checked against the manufacturer datasheet.

與替代品比較

參數 本產品
Brand Microchip Technology
Package 14-pin SOIC
Number of Amplifiers 4 channels
Minimum Supply Voltage 1.8 V
Gain-Bandwidth Product 300 kHz
Maximum Input Offset Voltage ±150 µV
Quiescent Current Approximately 30 µA per amplifier
Input Common-Mode Range Rail-to-rail
Output Swing Rail-to-rail
Gain Stability Unity-gain stable
Technology CMOS
Lifecycle Status Active

主要差異化特點

  • Precision offset specification for low-level signals (對比Higher-speed MCP6074T-E/ST)
  • Four precision amplifiers in one compact package (對比Single-channel amplifier designs)
  • Low-voltage operation supports portable systems (對比Higher-voltage operational amplifier families)

設計說明

Confirm the complete supply-voltage range and per-channel operating current in the Microchip manufacturer datasheet before assigning the 1.8 V minimum. Place the required bypass capacitor directly between each supply pin and ground, with a short and low-inductance return path. Because all four channels can contribute to total power, evaluate both the per-amplifier dissipation and the complete package thermal requirement at the highest expected channel activity.

Keep each precision input path short and separate from switching nodes, display regulators, and high-current return paths. Use a compact unity-gain feedback loop when the device is used as a buffer, and route the feedback connection directly to the relevant output and inverting-input pins. Ground the unused inputs to a defined common-mode potential; do not leave them floating. Follow the manufacturer application layout to minimize parasitic coupling and maintain predictable channel-to-channel behavior.

Do not assume that rail-to-rail input and output operation provides unlimited headroom under every load. Check the input common-mode range, output swing, capacitive-load stability, and maximum output current for the actual supply voltage. The 300 kHz gain-bandwidth product also means that closed-loop bandwidth is lower when the circuit uses higher gain, so verify settling time before using the amplifier in a sampled measurement path.

合規資訊

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

RoHS compliance and EAR99 classification are confirmed by a component listing. Other environmental, automotive, and material-compliance attributes are not established by the available manufacturer documentation.

資料驗證日期: 2026-11-15 — 資料由 XAIPART 元件工程團隊驗證及整理

相關搜尋

MCP6054-E/SL datasheet MCP6054-E/SL pinout MCP6054-E/SL datasheet pdf MCP6054-E/SL equivalent MCP6054-E/SL replacement MCP6054-E/SL cross reference MCP6054-E/SL vs MCP6074T-E/ST MCP6054-E/SL price MCP6054-E/SL stock Microchip MCP6054-E/SL MCP6054 1.8V quad op amp MCP6054 14-SOIC pinout MCP6054 precision sensor amplifier

相關元件與詞彙

Microchip Technology MCP6054-E/SL MCP6054 MCP6054T-E/SL MCP6054-E/ST MCP6054-E/STVAO MCP6074T-E/ST operational amplifier quad amplifier precision amplifier CMOS analog IC rail-to-rail input rail-to-rail output unity-gain stable gain-bandwidth product input offset voltage quiescent current 14-pin SOIC surface-mount package sensor conditioning current sensing bridge measurement battery-powered instrumentation RoHS EAR99
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情