PEX8617-BA50BC - 16-Lane 4-Port PCIe Switch | Broadcom
MPN: PEX8617-BA50BC ✓ 啟用中PEX8617-BA50BC 概覽
A PCI Express switch is a semiconductor device that manages traffic between a PCI Express upstream port and multiple downstream ports. This switch belongs to the PCIe switch family within interface ICs, semiconductor bridges, and connectivity controllers. Its multiport architecture allows storage controllers, network adapters, accelerators, and other peripherals to share a PCIe link while retaining independent downstream paths.
The principal published characteristics are 16 PCIe lanes, 4 ports, and PCIe Gen 2 operation. The physical implementation is a 324-pin PBGA with a 19 x 19 mm body. Because the device uses a large ball-grid array, its footprint, escape-routing strategy, layer count, and power-delivery network must be planned as a high-density PCB design rather than treated as a conventional perimeter package.
The four-port topology supports systems in which several endpoint devices must communicate through a centralized PCIe fabric. Compared with a point-to-point bridge, a switch provides a scalable internal routing fabric and can reduce the need for separate host controllers when endpoint traffic does not require dedicated links. Detailed link-width, lane-direction, reference-clock, and configuration behavior should be confirmed in the manufacturer datasheet before schematic sign-off.
Typical uses include PCIe expansion systems, embedded servers, storage platforms, industrial controllers, test equipment, and accelerator platforms. The PEX8617-BA50BC is also suited to designs that must consolidate several downstream PCIe devices behind one upstream connection. Firmware, endpoint drivers, and system-level topology must be validated together because the switch changes the PCIe enumeration and routing model.
For PCB implementation, follow the manufacturer land pattern, ball-map, and reference-design guidance exactly. Provide clean power rails, decouple each supply according to the recommended network, route high-speed differential pairs with matched impedance, and keep the 324-ball escape routing as short and symmetric as practical. Pay particular attention to via stubs, layer transitions, and return-path continuity.
This page consolidates the published switch topology and package information, organizes verified sourcing links, and adds practical implementation guidance beyond a basic distributor listing. It also distinguishes documented characteristics from electrical details that still require confirmation from the manufacturer datasheet.
直接替換替代品,適用於 PEX8617-BA50BC — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
PEX8617-BA50BCG
✅ 直接替換📋 參考替代品(不在目錄中)
PEX8617-BA50BC G
✅ 直接替換📋 參考替代品(不在目錄中)
PEX8617-BA50BC 最大額定值與電氣特性
| Manufacturer | Broadcom Limited |
| Product Type | PCI Express Switch IC |
| PCI Express Generation | Gen 2 |
| PCI Express Lane Count | 16 lanes |
| Port Count | 4 ports |
| Package Type | PBGA |
| Package Pin Count | 324 pins |
| Package Body Size | 19 x 19 mm |
| 安裝方式 | Surface mount |
| Channel Description | PCI Express switch, 16 lanes, 4 ports |
PEX8617-BA50BC 19 x 19 mm 腳位配置指南
PEX8617-BA50BC(19 x 19 mm 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: PEX8617-BA50BC.
請參閱 資料表 以查看完整腳位配置。
典型應用
PEX8617-BA50BC 適用於 6 應用s: PCIe Storage Expansion System, Embedded Server and Edge Compute, PCIe Network Adapter Aggregation, Industrial Controller and Test Equipment, PCIe Accelerator and FPGA Platform, Secure and Surveillance Processing.
PCIe Storage Expansion System
The PEX8617-BA50BC is suitable for a storage-expansion platform that must expose several PCIe endpoints through one upstream host connection. Its documented 4-port topology allows multiple controller cards, RAID devices, or NVMe adapters to share a PCIe switching fabric. The 16-lane capacity and Gen 2 classification provide a defined starting point for bandwidth planning, while the 324-pin PBGA makes the design inherently high density. Use the manufacturer reference topology to allocate lanes, distribute the reference clock, and sequence peripheral power. Validate the complete storage stack because switch firmware, endpoint drivers, operating-system enumeration, and card power limits must operate consistently before volume production.
推薦
Embedded Server and Edge Compute
The PEX8617-BA50BC can support an embedded server or edge-compute platform that consolidates multiple PCIe peripherals behind an upstream processor link. With 4 ports and 16 lanes, the device offers a practical fan-out point for network controllers, accelerators, and storage adapters. The Gen 2 designation defines the link generation to plan during system bring-up. Because the device uses a 324-ball 19 x 19 mm PBGA, the carrier board requires dense escape routing, multiple signal layers, and careful return-path design. Confirm thermal conditions and validate enumeration behavior across each supported endpoint class before selecting it for a production edge platform.
推薦
PCIe Network Adapter Aggregation
The PEX8617-BA50BC is appropriate for a networking chassis that needs several PCIe communication adapters to share a host-facing connection. Its 4-port switch topology reduces the number of host-to-endpoint paths that must be routed directly on the motherboard, while the 16-lane specification supports centralized traffic management. The device is particularly attractive when new adapters may be added without redesigning the entire system interconnect. Validate protocol-specific latency, packet throughput, and driver compatibility for each network controller, and use the Broadcom design guidance to control connector, retimer, and reference-clock placement on the high-density PBGA board.
推薦
Industrial Controller and Test Equipment
The PEX8617-BA50BC fits industrial controller and test-equipment architectures that require flexible PCIe expansion for instruments, acquisition cards, or programmable peripherals. Four switch ports provide a centralized fabric for connecting several measurement modules, while the 16-lane capacity establishes the aggregate resource that must be partitioned among them. Gen 2 operation should be accounted for when specifying throughput-critical instruments. The 324-pin PBGA footprint demands a disciplined high-speed layout, including continuous reference planes, short connections to the switch, and controlled impedance. Validate hot-plug behavior, power limits, and operating-system drivers for every instrument profile used in the final system.
推薦
PCIe Accelerator and FPGA Platform
The PEX8617-BA50BC can serve as the PCIe fan-out device in an accelerator or FPGA-based platform that attaches multiple high-speed peripherals to a host processor. The switch's 4-port arrangement allows FPGA modules, compute accelerators, and acquisition hardware to coexist behind one upstream path. The 16-lane specification is central to bandwidth allocation, so each downstream link must be sized against actual accelerator traffic rather than assuming the full lane count is available to every port. The 324-pin PBGA also makes power-integrity and escape-routing work significant. Confirm accelerator driver support, switch firmware configuration, reference-clock topology, and thermal performance under sustained workloads.
推薦
Secure and Surveillance Processing
The PEX8617-BA50BC is applicable to a secure or video-processing platform that needs to connect several PCIe capture, analytics, or storage devices to one processing subsystem. The four-port switch fabric offers a structured way to separate traffic paths while the 16-lane capacity defines the shared uplink resource. For sustained video workloads, thermal design and PCIe utilization must be evaluated together because Gen 2 traffic from multiple endpoints can converge on the same upstream link. Use the Broadcom reference design for ball escape routing, clock distribution, and power sequencing, then verify image-capture drivers, buffer allocation, and recovery behavior after a link retrain or peripheral reset.
推薦
推薦產品摘要
工程參考資料,適用於 PEX8617-BA50BC — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | PEX8617-BA50BCG | PEX8617-BA50BC G |
|---|---|---|---|
| Brand | Broadcom | Broadcom | Broadcom |
| Package | 324-PBGA (19x19) | 324-PBGA (19x19) | 324-PBGA (19x19) |
| PCI Express Generation | Gen 2 | Gen 2 | Gen 2 |
| PCIe Lane Count | 16 lanes | 16 lanes | 16 lanes |
| Port Count | 4 ports | 4 ports | 4 ports |
| Package Body Size | 19 x 19 mm | 19 x 19 mm | 19 x 19 mm |
| Device Type | PCI Express Switch IC | PCI Express Switch IC | PCI Express Switch IC |
| Surface Mount | Yes | Yes | Yes |
主要差異化特點
- Documented four-port PCIe switching topology (對比PEX8617-BA50BCG)
- High lane and port count in a single switching device (對比PEX8617-BA50BC G)
- Gen 2 PCIe fan-out for multi-endpoint systems (對比PEX8617-BA50BCG)
設計說明
The 324-pin PBGA requires a high-density escape-routing strategy. Follow the Broadcom reference layout for via arrays, ball assignments, and layer transitions. Keep the first signal escape as short as practical, preserve continuous reference planes beneath high-speed pairs, and avoid via stubs that create unnecessary discontinuities. Validate the complete layer stack with the manufacturer's signal-integrity guidance.
Implement the manufacturer-recommended power architecture for every supply rail, including the required bulk and high-frequency decoupling network. Place decoupling capacitance close to the associated switch balls and verify placement against the reference design. Confirm voltage limits, current demand, power sequencing, and clock-sourcing requirements in the manufacturer datasheet before releasing the schematic.
Do not treat PEX8617-BA50BC and PEX8617-BA50BC G as automatically interchangeable without checking the Broadcom ordering guide. Also do not assume that another PEX-series switch is pin-compatible merely because its name is similar. Confirm the exact orderable MPN, device revision, 324-ball map, port configuration, reference clock, and firmware support before a drop-in substitution is approved.
Route all PCIe differential pairs as impedance-controlled, tightly coupled links and keep connector, package, and test-point transitions consistent. Use the manufacturer channel simulation examples to select layer geometry and loss budgets. PCIe Gen 2 operation is sensitive to accumulated loss and return-path discontinuities, especially where 324 balls must escape through multiple board layers.
合規資訊
The verified product listings identify the device and package but do not publish the individual compliance declarations needed for these fields.