PEX8636-AA50RBCG - 36-Lane PCIe Gen 2 Switch | Broadcom
MPN: PEX8636-AA50RBCG ✓ 啟用中PEX8636-AA50RBCG 概覽
A PCI Express switch is a semiconductor device that routes PCI Express transaction and data traffic between multiple downstream ports and an upstream host-facing port. Within the PCI Express hierarchy, the switch sits between a root complex and endpoint devices. The PEX8636-AA family provides multi-root switching for systems that need to divide expansion traffic among several logical domains while maintaining a shared PCI Express fabric.
Principal characteristics include support for 36 PCI Express lanes, 24 ports, and PCI Express Gen 2 operation at 5.0 GT/s. The 1156-FCBGA package provides the dense interconnect required for a high-port-count switching device, while the large 35 mm by 35 mm body supports controlled escape routing on multilayer PCBs. Listed product information identifies tray packaging, a moisture sensitivity level of 4 with a 72-hour floor-life condition, and export control classification number 5A991B1.
The switching architecture allows a platform to consolidate several downstream links behind an upstream link, reducing the need for separate fabric-switch silicon when deterministic lane routing and centralized management are required. Fanout designs can improve resource organization in servers, storage appliances, industrial controllers, and multi-host systems, provided that the system topology remains within the electrical and protocol constraints defined for the device.
Thermal design is a central implementation consideration because a 1156-ball FCBGA concentrates high-speed and power-management functions into a compact area. The PCB should provide the reference stack-up, via density, decoupling, and copper area prescribed by the Broadcom ExpressLane PEX 8636-AA Data Book. Signal-integrity validation should include the intended lane rates, loss budget, connector and retimer transitions, and the full end-to-end channel.
Typical uses include server storage backplanes, PCI Express expansion chassis, multi-root computing platforms, industrial data-acquisition systems, and test equipment that distributes links among several instruments or accelerators. Application selection must verify port mapping, lane-width sharing, firmware support, reference-clock architecture, and the precise Broadcom ordering code before schematic capture.
直接替換替代品,適用於 PEX8636-AA50RBCG — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
PEX8636-AA50RBC-F
✅ 直接替換📋 參考替代品(不在目錄中)
PEX8636-AA50RBC-G
✅ 直接替換📋 參考替代品(不在目錄中)
PEX8636-AA50RBCG 最大額定值與電氣特性
| Product Type | PCI Express Switch IC |
| PCI Express Generation | Gen 2 |
| Maximum Data Rate | 5.0 GT/s per lane |
| Lane Count | 36 lanes |
| Port Count | 24 ports |
| 拓撲 | Multi-root switch |
| Series | ExpressLane |
| 封裝 | 1156-FCBGA (35 mm x 35 mm) |
| 安裝類型 | Surface Mount |
| Packaging | Tray |
| Moisture Sensitivity Level | MSL 4 (72 hours) |
| Export Control Class Number | 5A991B1 |
| Product Status | Active |
PEX8636-AA50RBCG 1156-fcbga (35 mm x 35 mm) 腳位配置指南
PEX8636-AA50RBCG(1156-fcbga (35 mm x 35 mm) 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: PEX8636-AA50RBCG.
請參閱 資料表 以查看完整腳位配置。
典型應用
PEX8636-AA50RBCG 適用於 6 應用s: Multi-Root Server Platform, PCIe Storage Expansion Chassis, Industrial Data-Acquisition System, PCIe Test and Measurement Chassis, PCIe Accelerator Expansion System, Network and Storage Controller Fanout.
Multi-Root Server Platform
The PEX8636-AA50RBCG fits multi-root server designs that require a PCI Express Gen 2 fabric with 36 lanes and 24 ports. It can organize accelerator, storage, and network links behind upstream connectivity while allowing traffic to be assigned among multiple root domains. The 5.0 GT/s per-lane rate supports Gen 2 endpoints, and the 1156-FCBGA package permits a dense switch fabric on a multilayer board. Designers should verify firmware ownership rules, reference-clock distribution, lane sharing, and the Broadcom power-delivery layout before committing the system topology.
PCIe Storage Expansion Chassis
A storage chassis can use the PEX8636-AA50RBCG to consolidate multiple PCI Express storage controllers behind a shared upstream connection. Its 24-port, 36-lane architecture provides the switching resources for several downstream devices, while Gen 2 operation at 5.0 GT/s fits legacy and mainstream PCIe storage controllers. The implementation must account for connector loss, slot bifurcation, hot-plug behavior, and the large thermal footprint of the 35 mm by 35 mm FCBGA. Validate the complete channel from the host root port through the switch to each storage endpoint.
Industrial Data-Acquisition System
The PEX8636-AA50RBCG can connect several data-acquisition, signal-processing, and instrumentation cards through a centralized PCI Express switching fabric. Its 24 ports and 36 lanes offer more fanout than a conventional endpoint controller, while the 5.0 GT/s Gen 2 interface rate supports many industrial adapters and legacy instrumentation. For factory deployments, use the manufacturer’s power, decoupling, and layer-stack recommendations, and verify the industrial temperature grade and any regulatory requirements for the completed system.
PCIe Test and Measurement Chassis
Test chassis with several instruments, digitizers, or signal generators can place the PEX8636-AA50RBCG between a host controller and the instrument population. The 36-lane, 24-port switching capability allows the system to scale multiple downstream links while the multi-root organization supports logically separated test domains. Design work should include lane-to-port mapping, reference-clock distribution, driver and firmware support, and insertion-loss analysis for long connector paths. The FCBGA land pattern also requires precise assembly and ball-level inspection capability.
PCIe Accelerator Expansion System
The PEX8636-AA50RBCG is appropriate for systems that need to distribute Gen 2 links among multiple accelerator or controller cards. Its 24 ports allow several downstream connections while the 36-lane resource budget provides flexibility for mixed-width endpoints. Because accelerator traffic can be burst-intensive, validate congestion handling, flow control, device drivers, and the complete PCB channel rather than relying only on nominal lane rate. Power delivery and thermal analysis should use actual accelerator loading rather than the minimum signaling state.
Network and Storage Controller Fanout
A PCI Express fabric built around the PEX8636-AA50RBCG can connect network adapters, storage controllers, and other host-facing devices in a single platform. The switch provides 24 downstream ports and 36 lanes at 5.0 GT/s, supporting orderly fanout of Gen 2 links behind one upstream root port. This arrangement can simplify board partitioning when the platform requires more ports than an integrated host controller provides. Engineers must confirm downstream bandwidth sharing, non-transparent bridging requirements, firmware topology, and signal integrity at every connector transition.
工程參考資料,適用於 PEX8636-AA50RBCG — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | PEX8636-AA50RBC-F | PEX8636-AA50RBC-G |
|---|---|---|---|
| Brand | Broadcom | Broadcom | Broadcom |
| Package | 1156-FCBGA (35 mm x 35 mm) | 1156-FCBGA (35 mm x 35 mm) | 1156-FCBGA (35 mm x 35 mm) |
| PCI Express Generation | Gen 2 | Gen 2 | Gen 2 |
| Maximum Data Rate | 5.0 GT/s per lane | 5.0 GT/s per lane | 5.0 GT/s per lane |
| Lane Count | 36 lanes | 36 lanes | 36 lanes |
| Port Count | 24 ports | 24 ports | 24 ports |
| Topology | Multi-root switch | Multi-root switch | Multi-root switch |
| Product Series | ExpressLane | ExpressLane | ExpressLane |
主要差異化特點
- High-density multi-root PCIe fanout (對比PEX8636-AA50RBC-F)
- Exact catalog identity for procurement (對比PEX8636-AA50RBC-G)
- Large-scale port consolidation (對比PEX8636-AA50RBC-F)
設計說明
Treat the 1156-FCBGA as a high-density, high-speed design. Follow the Broadcom ExpressLane PEX 8636-AA Data Book for the reference layer stack-up, via-in-pad or escape-routing method, power-plane geometry, and decoupling network. Preserve continuous return paths beneath high-speed pairs and place bypass capacitors close to the supply and ground balls. Use the manufacturer’s ball-reference data because no library-compatible 1156-ball pin map is available here.
Validate the end-to-end link rather than only the package escape. Include connector and cable loss, PCB material, lane skew, reference-plane transitions, and receiver equalization in the channel model. The stated 5.0 GT/s Gen 2 rate establishes the signaling target, but successful operation depends on the complete topology and on any retimer, adapter, or long backplane in the path.
Calculate heat flow from the switching activity of the attached endpoints rather than from an idle device. Use Broadcom’s power and thermal guidance with the final PCB stack-up, copper pours, airflow, and enclosure temperature. Confirm that the 35 mm by 35 mm FCBGA maintains its specified operating limits, especially in dense server or storage systems where adjacent devices can raise the local ambient temperature.
Do not treat the -F, -G, and -ND catalog forms as interchangeable solely from naming conventions. Confirm the exact Broadcom ordering code, firmware image, topology support, lane configuration, and package revision before schematic release. Also avoid assigning PCIe links without checking the shared-lane bandwidth budget; having 36 physical lanes does not guarantee full-width operation for every port simultaneously.
合規資訊
The product listing provides export control class number 5A991B1, MSL 4, tray packaging, and an active product status. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not identified in the available product information.