PEX8664-AA50RBCG - 64-Lane PCIe Gen2 16-Port Switch | Broadcom
MPN: PEX8664-AA50RBCG ✓ 啟用中PEX8664-AA50RBCG 概覽
A PCI Express switch is a multiport expansion and routing device within the interface-IC hierarchy. It sits between PCIe endpoint devices and a host or upstream controller, using packet switching, port arbitration, configuration handling, and lane-level connectivity to distribute traffic across multiple links. The PEX8664 family therefore belongs to the PCIe interface IC, semiconductor, and computer-connectivity categories.
The primary identified characteristics are 64 PCI Express lanes, 16 ports, and operation at 5.0 GT/s. The listed package is FCBGA-1156 in a 35 x 35 mm form factor. These figures make the device relevant to embedded computing, storage, networking, accelerator, and industrial systems that require more PCIe connectivity than a single host controller can provide.
Technical implementation requires careful lane assignment, reference-clock distribution, power delivery, signal-integrity validation, and firmware-supported enumeration and routing. Because the device exposes many high-speed differential pairs, PCB layout quality directly affects insertion loss, crosstalk, jitter tolerance, and link stability. Power sequencing and rail decoupling also require coordinated planning across the large ball-grid array.
Typical deployments include consolidating NVMe storage into a multi-port fabric, connecting PCIe Ethernet or network-interface adapters, attaching accelerator cards to industrial controllers, and expanding server backplanes. The 16-port topology is particularly useful where multiple endpoint classes must coexist behind a single upstream interface.
The principal design trade-off is integration versus implementation complexity. Consolidating up to 64 lanes and 16 ports simplifies system topology, but it requires a large FCBGA land pattern, extensive high-speed routing, careful thermal management, and comprehensive PCIe configuration support. Confirm the exact lane-to-port mapping, device-specific limits, reference design, and exposed-pad requirements in the manufacturer documentation before layout release.
This product page organizes the verified 5.0 GT/s, 64-lane, 16-port, and FCBGA-1156 characteristics with practical PCB, power, thermal, and signal-integrity guidance. It also distinguishes the exact target ordering code from the closely related F revision so procurement and redesign decisions are based on the correct device variant.
直接替換替代品,適用於 PEX8664-AA50RBCG — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: PEX8664-AA50RBCG (相同外形與佔位) — 差異在於 Device Classification, PCI Express Generation, Package.
PEX8664-AA50RBC-F
✅ 直接替換📋 參考替代品(不在目錄中)
PEX8664-AA50RBC G
✅ 直接替換📋 參考替代品(不在目錄中)
PEX8664-AA50RBCG 最大額定值與電氣特性
| PCI Express Generation | Gen2 |
| Maximum Data Rate | 5.0 GT/s |
| PCI Express Lane Count | 64 lanes |
| Port Count | 16 ports |
| 封裝 | FCBGA-1156 |
| Package Dimensions | 35 x 35 mm |
| Ball Count | 1156 balls |
| Device Classification | PCI Express switch IC |
| 介面 | PCI Express |
| 安裝類型 | Surface mount |
PEX8664-AA50RBCG 35 x 35 mm 腳位配置指南
PEX8664-AA50RBCG(35 x 35 mm 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: PEX8664-AA50RBCG.
請參閱 資料表 以查看完整腳位配置。
典型應用
PEX8664-AA50RBCG 適用於 6 應用s: NVMe Storage Consolidation, Industrial Accelerator Systems, PCIe Network Appliances, Embedded Computing Backplanes, Data Acquisition and Control, Server and Storage Backplane Expansion.
NVMe Storage Consolidation
The PEX8664-AA50RBCG fits systems that need several PCIe storage endpoints behind one upstream connection. Its 64-lane, 16-port Gen2 switch architecture can provide a centralized path for NVMe devices while supporting a broader topology than a single host controller. Designers should allocate lanes according to the endpoint requirements of each 5.0 GT/s link and validate boot, enumeration, hot-plug behavior, and error recovery in the complete system. The large FCBGA-1156 package also requires careful high-speed layout, power delivery, and thermal design. NVMe-specific firmware support and any device-imposed operating restrictions should be confirmed from the manufacturer documentation before production deployment.
推薦
Industrial Accelerator Systems
The PEX8664-AA50RBCG is appropriate for industrial controllers that must connect multiple PCIe accelerator cards while maintaining one managed fabric. Its 16 ports and 64 lanes offer more expansion capacity than a conventional single-port controller, allowing specialized computation, acquisition, or control modules to share system bandwidth. Each downstream link must be assigned according to the accelerator's bandwidth needs, and the host software must support enumeration, routing, and failure handling. Because this is a 5.0 GT/s Gen2 device, the system design must account for link training, connector and trace loss, reference-clock distribution, and synchronization across multiple endpoints in a ruggedized environment.
推薦
PCIe Network Appliances
The PEX8664-AA50RBCG can serve as the PCIe switching fabric in a network appliance that connects multiple Ethernet, storage, or security controllers to a host processor. Its 64 lanes and 16 ports provide room to separate endpoint functions while keeping the upstream topology manageable. A practical design should reserve appropriate bandwidth for networking traffic, provide low-skew clock distribution, and keep high-speed lane geometry continuous through the 35 x 35 mm FCBGA footprint. Link training and port configuration must be coordinated by the platform firmware, while independent power rails, current limits, and thermal monitoring should be planned for each downstream adapter card.
推薦
Embedded Computing Backplanes
The PEX8664-AA50RBCG is suited to embedded backplanes that connect a compute module to storage, communication, and optional expansion cards. A 16-port PCIe Gen2 switch reduces the need for multiple host-side PCIe controllers and permits a structured, centrally managed topology. The 64 available lanes must be divided according to the physical port configuration and intended bandwidth, with unused or disabled ports handled according to the manufacturer reference design. Signal-integrity work should include differential impedance control, via transitions, connector launches, reference-plane continuity, and loss budgets. Power-state coordination is also important because a large switch can present a substantial combined load during enumeration or link-width training.
推薦
Data Acquisition and Control
The PEX8664-AA50RBCG can centralize PCIe-based data-acquisition, timing, and real-time control modules in a multi-card industrial system. Its 16 ports allow several specialized endpoint cards to operate behind one upstream interface, while the 64-lane fabric provides a defined bandwidth pool for the system. Designers should assign lanes according to each card's sustained and burst traffic, ensure deterministic reference-clock distribution, and verify that every acquisition clock has a traceable synchronization path. High-speed lane routing, power sequencing, and thermal monitoring must be evaluated across a fully populated board because simultaneous link activity can increase switching activity and board temperature relative to lightly loaded testing.
推薦
Server and Storage Backplane Expansion
The PEX8664-AA50RBCG is relevant to server and storage backplanes where multiple PCIe endpoints need to converge on a host or fabric controller. Its 16-port Gen2 topology can support storage controllers, networking adapters, and other expansion devices while limiting the number of direct host interfaces. A successful implementation requires lane-by-lane bandwidth planning, reliable auxiliary and reference-clock distribution, and coordinated enumeration across all endpoints. The FCBGA footprint should be placed to favor uniform routing quality to nearby connectors, while power delivery must support high-current switching transitions without disturbing adjacent rails. Error containment, reset behavior, and hot-plug support should be verified against the intended server-class environment.
推薦
推薦產品摘要
工程參考資料,適用於 PEX8664-AA50RBCG — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | PEX8664-AA50RBC-F | PEX8664-AA50RBC G |
|---|---|---|---|
| Brand | Broadcom | Broadcom | Broadcom |
| Package | FCBGA-1156 | FCBGA-1156 | FCBGA-1156 |
| PCI Express Generation | Gen2 | Gen2 | Gen2 |
| Maximum Data Rate | 5.0 GT/s | 5.0 GT/s | 5.0 GT/s |
| PCI Express Lane Count | 64 lanes | 64 lanes | 64 lanes |
| Port Count | 16 ports | 16 ports | 16 ports |
| Package Dimensions | 35 x 35 mm | 35 x 35 mm | 35 x 35 mm |
| Ball Count | 1156 balls | 1156 balls | 1156 balls |
| Surface-Mount Construction | Yes | Yes | Yes |
| Revision Qualification | G ordering code | F ordering code; detailed revision differences unconfirmed | G ordering code with spacing variant |
主要差異化特點
- High port-count PCIe Gen2 switching (對比PEX8664-AA50RBC-F)
- Large-scale fabric integration (對比PEX8664-AA50RBC G)
- High-density 35 x 35 mm integration (對比PEX8664-AA50RBC-F)
設計說明
Use the manufacturer PCB reference design as the baseline for the FCBGA-1156 footprint, ball escapes, plane construction, and PCIe lane routing. Preserve continuous reference planes through the escape region, minimize via stubs, and maintain matched differential geometry. Because the switch carries many 5.0 GT/s links, route the most sensitive lanes first and reserve adequate escape space for all 16 ports.
Plan power delivery from the component's actual rail and current requirements rather than from a generic FCBGA power estimate. Provide local bulk and high-frequency decoupling at the ball fields, keep supply and ground return paths closely coupled, and verify simultaneous link-training activity for droop and transient margin. Confirm sequence, ramp, and current-limit requirements against the manufacturer electrical characteristics before releasing power.
Model the complete escape, package, via, and connector path before fabrication. Account for loss, crosstalk, impedance variation, via transitions, and connector launches at 5.0 GT/s, including the harmonic content of the PCI Express signaling. Use the manufacturer's reference stack-up and constraints, and validate with simulation followed by physical-layer testing on the first assembled boards.
Calculate junction temperature from the board-specific power dissipation and package thermal model; the component's worst-case activity and ambient conditions are important because many simultaneously active lanes can increase thermal load. Provide the manufacturer-recommended exposed-pad connection, adequate copper area, and appropriate airflow or conduction path. Avoid relying on a generic board-level thermal-rise estimate for production qualification.
Do not substitute the G ordering code for the F revision without checking the manufacturer revision notes and validating configuration, firmware, electrical limits, and lifecycle requirements. The two variants share the identified package and headline PCIe topology, but matching a 1156-ball footprint alone does not establish drop-in qualification. Document the exact approved ordering code in the BOM and purchasing system.
合規資訊
Compliance declarations for the exact PEX8664-AA50RBCG ordering code were not identified in the available manufacturer or distributor records. The appropriate manufacturer product page or material declaration should be reviewed before environmental, automotive, or procurement qualification.