PEX8717-CA80BC - 16-Lane PCIe Gen 3 Switch | Broadcom
MPN: PEX8717-CA80BC ✓ 啟用中PEX8717-CA80BC 概覽
A PCI Express switch is an interface IC within the broader semiconductor hierarchy. It routes high-speed serial transactions among PCI Express links while coordinating lane-level traffic between upstream hosts, downstream endpoints, and internal switch fabrics. Unlike a simple analog multiplexer, a PCIe switch implements a transactional protocol, manages link training, controls traffic flow, and provides a non-blocking switching fabric designed for concurrent data movement.
The PEX8717-CA80BC is identified as a 16-lane, 10-port, PCIe Gen 3 switch. Its principal system-level benefit is the ability to consolidate multiple endpoint relationships behind a scalable switch layer. This architecture can reduce the number of direct host-to-endpoint connections required in complex equipment while preserving concurrent traffic paths. The 10-port configuration also provides substantial fan-out capability for storage, networking, and embedded computing systems.
Broadcom describes the PEX 8717 as suitable for multi-host systems requiring high bandwidth and non-blocking interconnection. Multi-host arrangements can place independent computing domains behind a common switching fabric, allowing each host to communicate with its assigned endpoint set. This makes the device relevant to chassis designs, embedded servers, accelerator systems, storage platforms, and communication equipment where several host-to-device paths must coexist.
Typical deployments include server backplanes, storage controllers, communications infrastructure, graphics systems, and PCIe aggregation platforms. In these applications, the switch can fan out a host-facing interface toward numerous downstream devices, aggregate endpoint traffic, or support peer-to-peer arrangements. The specific topology, lane allocation, firmware configuration, and signal-integrity implementation must be validated against the Broadcom design documentation for the selected board and connector arrangement.
Design integration requires careful attention to the 324-FCBGA land pattern, high-speed differential routing, reference-plane continuity, connector and package escape geometry, power delivery, and thermal performance. Differential pair geometry should remain controlled along the escape path from the switch to board-level connectors or devices. Power and ground planes require uninterrupted return paths because high-speed edge rates can make small discontinuities more consequential than their DC resistance suggests.
This page combines Broadcom product information, distributor identification, package details, PCIe interface characteristics, practical deployment guidance, and component-search coverage for engineers evaluating the PEX8717-CA80BC. It also identifies where application-specific electrical, thermal, timing, firmware, and pin-assignment decisions require confirmation from the manufacturer’s authoritative documentation.
直接替換替代品,適用於 PEX8717-CA80BC — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
PEX8717-CA80BC-G
✅ 直接替換📋 參考替代品(不在目錄中)
PEX8717-CA80BCG
✅ 直接替換📋 參考替代品(不在目錄中)
PEX8717-CA80BC-G
✅ 直接替換📋 參考替代品(不在目錄中)
PEX8717-CA80BC 最大額定值與電氣特性
| Product Type | PCI Express Gen 3 switch IC |
| PCI Express Generation | Gen 3 |
| Lane Count | 16 lanes |
| Port Count | 10 ports |
| Switching Architecture | Multi-host, non-blocking |
| 封裝 | 324-FCBGA |
| Package Dimensions | 19 x 19 mm |
| 安裝類型 | Surface mount |
| 腳位數 | 324 pins |
PEX8717-CA80BC 19 x 19 mm 腳位配置指南
PEX8717-CA80BC(19 x 19 mm 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: PEX8717-CA80BC.
請參閱 資料表 以查看完整腳位配置。
典型應用
PEX8717-CA80BC 適用於 6 應用s: Multi-Host Server Backplane, Storage Controller Aggregation, PCIe Fan-Out and Aggregation, Communications Infrastructure, Graphics and Accelerator Platform, Peer-to-Peer PCIe Systems.
Multi-Host Server Backplane
The Broadcom PEX8717-CA80BC fits server backplanes that need several computing domains to reach dedicated endpoint groups through one PCIe Gen 3 switching layer. Its documented 16-lane, 10-port configuration provides meaningful fan-out, while the non-blocking interconnection supports concurrent traffic paths rather than forcing endpoints through a shared serialized link. According to the Broadcom PEX 8717 product overview, multi-host switching is a core capability. The board designer must still allocate host and endpoint lanes correctly, provide a compliant reference clock, validate power delivery, and confirm that every selected endpoint is supported by the configured topology and firmware.
Storage Controller Aggregation
The PEX8717-CA80BC is suitable for storage platforms that must aggregate multiple PCIe Gen 3 endpoints behind a common switching fabric. Its 16 lanes and 10 ports offer the interface density needed to arrange multiple storage controllers, adapters, or accelerator endpoints without relying on a single point-to-point host relationship. The switch’s documented non-blocking architecture is important when several devices can transmit concurrently. In a real storage design, engineers must align lane widths with endpoint capabilities, balance traffic classes, validate connector and trace losses, and confirm that the selected Broadcom firmware supports the intended endpoint ordering and operating mode.
PCIe Fan-Out and Aggregation
The PEX8717-CA80BC can serve as a central PCIe Gen 3 fan-out point when one host must reach numerous downstream devices. Its 10-port configuration supports more endpoint relationships than a simple four-lane bridge, while the 16-lane fabric provides a defined routing resource for the selected topology. Broadcom identifies fan-out and aggregation as suitable PEX 8717 applications. Practical implementation depends on correct lane mapping, balanced utilization across switch ports, proper connector placement, and signal-integrity work that preserves differential impedance and return-path continuity from the 324-FCBGA escape region.
Communications Infrastructure
The PEX8717-CA80BC applies to communications equipment that needs deterministic PCIe connectivity among multiple hosts, adapters, or endpoint processors. Its multi-host Gen 3 switching function can separate traffic domains while retaining a shared physical board framework, and the 10-port architecture provides room for endpoint fan-out. The device is relevant where communication modules, line cards, or accelerator engines require more connectivity than a direct host-to-device link can provide. Designers should use the Broadcom PEX 8717 documentation to confirm supported port configurations, reference-clock requirements, and firmware behavior before freezing lane allocation and the 324-FCBGA layout.
Graphics and Accelerator Platform
The PEX8717-CA80BC can support graphics or accelerator platforms that require several PCIe endpoints to communicate through a non-blocking switching layer. Its 16-lane and 10-port configuration provides room for host-facing links and multiple downstream devices, making it useful for complex accelerator chassis and shared graphics fabrics. The principal engineering tradeoff is that a Gen 3 design still requires disciplined signal-integrity implementation at the board level. Keep differential escape routes short, maintain continuous reference planes, control connector and via transitions, and validate the completed channel for the intended lane rate before production release.
Peer-to-Peer PCIe Systems
The PEX8717-CA80BC is relevant to peer-to-peer systems in which multiple PCIe domains exchange traffic through a scalable switching fabric rather than communicating only through a host bridge. Broadcom identifies peer-to-peer traffic as a suitable PEX 8717 application, and the 16-lane, 10-port device provides substantial routing capacity for such topologies. Adoption requires a clear traffic map defining which upstream and downstream relationships are allowed, plus firmware configuration that matches that map. Board validation should include lane-width compatibility, hot-plug behavior where applicable, clock-domain assumptions, and compliance testing of the complete PCIe links.
工程參考資料,適用於 PEX8717-CA80BC — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 |
|---|---|
| Brand | Broadcom |
| Package | 324-FCBGA (19 x 19 mm) |
| Product Type | PCI Express Gen 3 switch IC |
| PCI Express Generation | Gen 3 |
| Lane Count | 16 lanes |
| Port Count | 10 ports |
| Switching Architecture | Multi-host, non-blocking |
| Primary Applications | Servers, storage, communications, graphics, fan-out, aggregation, and peer-to-peer traffic |
主要差異化特點
- Documented 10-port PCIe Gen 3 switching capacity (對比PEX8718-AB80BI-G)
- Purpose-built multi-host interconnection (對比PEX8718-AB80BI-G)
- Broad application coverage in one switching device (對比PEX8718-AB80BI-G)
設計說明
Route the PCIe differential pairs from the 324-FCBGA as short and symmetrically as practical. Maintain the stack-up-defined differential impedance through escape geometry, vias, connectors, and test points, and preserve a continuous ground reference beneath every high-speed pair. Because this is a dense fine-pitch BGA, fanout vias and breakout geometry require careful return-path planning; otherwise transitions can add impedance discontinuities that become significant at PCI Express Gen 3 edge rates.
Use the manufacturer’s power-up sequence, voltage rails, reference clock, and decoupling recommendations without substitution. Provide low-impedance power and ground planes, place bulk and high-frequency decoupling according to the device reference design, and keep switching or high-current paths away from sensitive reference-clock and input circuitry. Validate sequencing at power-off and power-on boundaries so that every required rail meets its specified operating condition before the switch begins traffic.
Validate the complete PCIe channel rather than only the package escape. Include connector and cable losses, PCB material and stack-up, via transitions, skew, return-path discontinuities, and endpoint behavior in the channel simulation. For 16-lane operation, inspect lane-to-lane timing margin and insertion loss across the intended frequency range. Confirm reference-clock jitter, de-emphasis, equalization, and compliance behavior on hardware rather than relying only on schematic connectivity.
Do not treat a similar PCIe switch as a drop-in replacement without a complete ball-map, lane-topology, power, clock, firmware, and timing review. The PEX8717-CA80BC is a complex 324-FCBGA device with multi-host routing functions; host-facing and endpoint-facing lanes must match the intended design. Avoid deriving the pinout from distributor categorization, and avoid changing port order or firmware configuration without revalidating enumeration, peer-to-peer access, and downstream device resets.
合規資訊
No product-specific environmental or material compliance declarations are stated in the manufacturer overview or distributor listings.