PIC16C711T-04I/SS - 8-Bit 4MHz OTP MCU, 1.75KB | Microchip
MPN： PIC16C711T-04I/SS ✓ 啟用中PIC16C711T-04I/SS 概覽
A microcontroller (MCU) is a single-chip computer containing a CPU, program and data memory, I/O peripherals, and a clock generator. OTP microcontrollers are programmed once with a firmware image and cannot be re-erased, which lowers unit cost compared with flash-based parts and makes them well-suited to high-volume, closed-firmware appliances. The PIC16C71X family adds an integrated successive-approximation ADC, eliminating the need for an external converter in sensor-interface designs.
Key features include the 4 MHz maximum clock rate, 1.75 KB OTP program memory (1K x 14 words), 68 bytes of data RAM, four 8-bit I/O ports (PORTA 5 bits, PORTB 8 bits), and a 4-channel 8-bit ADC with on-chip sample-and-hold. The device supports in-circuit serial programming, low-power SLEEP mode, and a programmable watchdog timer. The RISC-style PIC16 architecture uses only 35 single-word instructions, simplifying code generation in C or assembly.
Built on a low-power CMOS process, the PIC16C711 implements the PIC16 mid-range core with a 14-bit instruction word and an 8-bit data path. The integrated 8-bit ADC samples analog inputs on RA0-RA3, allowing direct connection of resistive sensors, thermistors, or potentiometers without external signal conditioning. The internal RC oscillator option and power-on reset reduce external component count.
Typical applications include white-goods and appliance control (washing machines, dishwashers, microwave ovens), battery chargers, automotive body electronics (non-safety subsystems), sensor signal conditioning nodes, and small consumer devices (remote controls, thermostats, toy subsystems). The 4 MHz industrial-grade part is well-matched to mains-frequency signal processing and slow control loops.
When designing with this part, ensure the OTP window is left on or off according to the in-circuit-programming method selected, place a 0.1 µF decoupling capacitor within 5 mm of VDD, and reserve the RA4 pin as an open-drain output if used for T0CKI. The Microchip PIC16F716 is the recommended newer pin-compatible alternative for new designs requiring flash memory, while PIC16C711T-04I/SS remains preferred for high-volume cost-down production.
This page synthesizes distributor pricing, tape-and-reel packaging data, and drop-in same-package PIC16C71X alternatives not found in the manufacturer datasheet, structured for engineers sourcing long-lifecycle 8-bit MCU replacements.
直接替換替代品，適用於 PIC16C711T-04I/SS — 相同封裝，腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號： PIC16C711T-04I/SS （相同外形與佔位） — 差異在於 Core Architecture, Timers, Package, Watchdog Timer, ADC.
PIC16C711T-04/SS
✅ 直接替換聯絡詢價
查看資料表 →PIC16C711-04I/SS
✅ 直接替換聯絡詢價
查看資料表 →PIC16C711-04/SS
✅ 直接替換聯絡詢價
查看資料表 →PIC16C711-04I/P
✅ 直接替換聯絡詢價
查看資料表 →PIC16F716-I/SS
✅ 直接替換聯絡詢價
查看資料表 →PIC16C711T-04C/SS
✅ 直接替換📋 參考替代品（不在目錄中）
PIC16C711T-04I/SS 最大額定值與電氣特性
| Core | PIC16 mid-range 8-bit RISC |
| Instruction Set Size | 35 single-word instructions |
| Program Memory Type | OTP (One-Time Programmable) EPROM |
| Program Memory Size | 1.75 KB (1K x 14 words) |
| Data RAM | 68 bytes |
| 最大時脈頻率 | 4 MHz |
| Instruction Cycle Time | 200 ns at 4 MHz |
| Supply Voltage (VDD) | 4.0 V to 6.0 V |
| I/O Pins | 13 |
| ADC | 8-bit, 4 channels, integrated |
| Timers | Timer0 (8-bit), Watchdog Timer |
| 工作溫度 | -40°C to +85°C (Industrial, "I") |
| 封裝 | 20-pin SSOP (5.30 mm) |
| 安裝類型 | Surface Mount |
| Packaging | Tape & Reel (T) |
| RoHS 狀態 | Compliant |
| Lead-Free | Yes |
| AEC-Q100 | Not qualified |
PIC16C711T-04I/SS 腳位配置
| 腳位 1 | RA0/AN0 — PORTA bit 0 / analog input channel 0 |
| 腳位 2 | RA1/AN1 — PORTA bit 1 / analog input channel 1 |
| 腳位 3 | RA2/AN2 — PORTA bit 2 / analog input channel 2 |
| 腳位 4 | MCLR/VPP — Master clear reset / programming voltage input |
| 腳位 5 | VSS — Ground reference |
| 腳位 6 | RB0/INT — PORTB bit 0 / external interrupt input |
| 腳位 7 | RB1 — PORTB bit 1 |
| 腳位 8 | RB2 — PORTB bit 2 |
| 腳位 9 | RB3 — PORTB bit 3 |
| 腳位 10 | RB4 — PORTB bit 4 |
| 腳位 11 | RB5 — PORTB bit 5 |
| 腳位 12 | RB6 — PORTB bit 6 |
| 腳位 13 | RB7 — PORTB bit 7 |
| 腳位 14 | VDD — Positive supply voltage (4.0-6.0 V) |
| 腳位 15 | OSC2/CLKOUT — Oscillator output / clock out |
| 腳位 16 | OSC1/CLKIN — Oscillator input / external clock in |
| 腳位 17 | RA3/AN3/VREF — PORTA bit 3 / analog channel 3 / ADC voltage reference |
| 腳位 18 | RA4/T0CKI — PORTA bit 4 (open-drain) / Timer0 clock input |
| 腳位 19 | VSS — Ground reference |
| 腳位 20 | VDD — Positive supply voltage (4.0-6.0 V) |
典型應用
PIC16C711T-04I/SS 適用於 6 應用s: White Goods Appliance Control, Battery Charger Control, Sensor Signal Conditioning Nodes, Remote Control and Toy Subsystems, HVAC Thermostat and Fan Control, Automotive Body Electronics (Non-Safety).
White Goods Appliance Control
The PIC16C711T-04I/SS is well suited for white-goods appliance control because its 1.75 KB OTP program memory holds a complete washing-machine or dishwasher cycle state machine, while the integrated 4-channel 8-bit ADC samples water temperature, turbidity, and motor current directly. Operating from 4.0-6.0 V, the part interfaces to triac-driver optos and 24 V relay coils through PORTB. The industrial -40 to +85°C range covers under-cabinet thermal load, and the 5 MIPS throughput at 4 MHz supports PID temperature control with millisecond update rates. Pin-to-pin compatibility with PIC16F716 allows easy migration to flash for firmware updates during production validation. Recommend PIC16C711T-04I/SS as the production cost-down part once firmware is locked.
推薦
Battery Charger Control
The PIC16C711T-04I/SS delivers deterministic closed-loop control for NiCd, NiMH, and SLA battery chargers, where its 8-bit ADC samples charge current (typically 0.1-2 A) via a sense resistor, and PORTA outputs drive the PWM switch. The 4 MHz clock supports 8-bit PWM at sub-1 kHz refresh, sufficient for CC/CV charge profiles. At VDD=5 V and active current ~2 mA, the part contributes negligible quiescent drain during the long float-charge phase, and SLEEP mode (< 1 µA) handles the standby state when the battery is full. The industrial temperature grade supports under-hood and garage-environment operation. The OTP memory is ideal because the charge algorithm is fixed at firmware time and need never change.
推薦
Sensor Signal Conditioning Nodes
The PIC16C711T-04I/SS is a natural fit for distributed sensor nodes because its 4-channel 8-bit ADC accepts direct inputs from thermistors, photocells, and potentiometers without external signal conditioning, and its 13 I/O pins drive indicator LEDs, relays, and a UART or SPI debug port. At 4 MHz the part executes linearization, hysteresis, and averaging routines in real time at sub-ms loop rates. The 4-6 V supply range covers 5 V regulated industrial buses, and the SSOP-20 footprint fits compact sensor housings. The 1.75 KB OTP program memory holds both calibration constants and the application firmware, eliminating the need for an external EEPROM. Industrial temperature operation handles factory-floor and outdoor cabinet environments.
推薦
Remote Control and Toy Subsystems
The PIC16C711T-04I/SS delivers cost-effective 8-bit intelligence for consumer remote controls, educational toys, and low-end hobbyist subsystems. The 35-instruction PIC16 RISC core is easy to program in assembly, and 1.75 KB of OTP holds a complete IR-protocol state machine or motor-sequence controller. SLEEP mode (< 1 µA) extends battery life when the toy is idle; active ~2 mA at 4 MHz supports weeks of playtime on two AA cells. The 13 I/O pins drive IR LEDs, pushbuttons, piezo buzzers, and DC motor bridges directly. The SSOP-20 surface-mount package is suitable for automated high-volume assembly; the tape-and-reel 'T' format suits pick-and-place feeders. OTP memory locks the firmware at production time, preventing field tampering.
推薦
HVAC Thermostat and Fan Control
The PIC16C711T-04I/SS implements the closed-loop control for a wall-mount thermostat, where its 8-bit ADC reads the room thermistor and a 7-segment LED driver interface, while PORTB outputs switch the fan relay and the heat-cool valve. The 4 MHz clock supports a 1-second PID update rate with hysteresis, suitable for residential comfort control. Industrial temperature operation ensures the controller survives attic and equipment-room conditions. The 1.75 KB OTP memory locks the calibration curve and the temperature setpoint logic, eliminating the need for a separate configuration EEPROM. The 5 MIPS throughput handles the UI scanning (buttons, LEDs) plus control arithmetic in a single chip.
推薦
Automotive Body Electronics (Non-Safety)
The PIC16C711T-04I/SS supports cost-sensitive automotive body-electronics applications such as seat-position memory, mirror-fold controllers, and ambient lighting drivers, where the 1.75 KB OTP locks the calibration and the 13 I/O pins drive relay coils and PWM LED strings. The industrial -40 to +85°C temperature range covers cabin and trunk environments. Operating from 5 V regulated, the part interfaces to 12 V loads through MOSFET drivers. Note that this part is NOT AEC-Q100 qualified; for safety-critical or under-hood applications, choose PIC16F716-I/SS or a Q-qualified PIC16 alternative. OTP memory is preferred in automotive to prevent field firmware tampering.
推薦
推薦產品摘要
工程參考資料，適用於 PIC16C711T-04I/SS — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | PIC16C711T-04/SS | PIC16C711-04I/SS | PIC16C711-04/SS | PIC16F716-I/SS |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 20-pin SSOP | 20-pin SSOP (same) | 20-pin SSOP (same) | 20-pin SSOP (same) | 20-pin SSOP (same) |
| Max Clock Frequency | 4 MHz | 4 MHz | 4 MHz | 4 MHz | 20 MHz |
| Program Memory Type | OTP (1.75 KB) | OTP (1.75 KB) | OTP (1.75 KB) | OTP (1.75 KB) | Flash (re-programmable) |
| Operating Temperature | -40°C to +85°C (Industrial) | 0°C to +70°C (Commercial) | -40°C to +85°C (Industrial) | 0°C to +70°C (Commercial) | -40°C to +85°C (Industrial) |
| Supply Voltage | 4.0 V to 6.0 V | 4.0 V to 6.0 V | 4.0 V to 6.0 V | 4.0 V to 6.0 V | 2.0 V to 5.5 V |
| I/O Pins | 13 | 13 | 13 | 13 | 13 |
| ADC | 8-bit, 4-channel | 8-bit, 4-channel | 8-bit, 4-channel | 8-bit, 4-channel | 8-bit, 4-channel + enhanced PWM |
| Packaging Format | Tape & Reel | Tape & Reel | Tube | Tube | Tape & Reel |
主要差異化特點
- Industrial temperature grade in tape-and-reel format (對比PIC16C711-04I/SS)
- Factory-direct same-pin alternative for new designs (對比PIC16F716-I/SS)
- Integrated 8-bit ADC eliminates external converter (對比PIC16C710T-04/SS)
設計說明
Place a 0.1 µF X7R ceramic decoupling capacitor within 5 mm of the VDD pin (pin 20 or pin 14), with a 10 µF bulk tantalum or aluminum capacitor on the same VDD trace. The PIC16C711T-04I/SS draws approximately 2 mA active at 4 MHz / 5 V, with peaks during ADC conversions. Add a series ferrite bead (600 Ω at 100 MHz) if VDD is shared with relay or motor drivers to prevent digital switching noise from coupling into the analog reference.
The PIC16C711T-04I/SS SSOP-20 package has theta_JA of approximately 95 °C/W in still air. At maximum active current (2 mA at 6 V) power dissipation is only 12 mW, so thermal derating is not a concern for normal operation. However, when programming in-circuit via high-voltage VPP on MCLR, the elevated voltage can raise junction temperature by 5-10 °C - this is well within the industrial -40 to +85°C rating.
Keep the analog inputs (RA0-RA3) traces short and routed away from the oscillator pins (OSC1, OSC2) and PORTB digital outputs. The integrated 8-bit ADC has a 10 µs acquisition window; 20 ns edge transitions on adjacent traces can introduce 1-2 LSB crosstalk. Place the analog ground island under pins 1-3 and 17-18, and stitch it to the main ground plane with a single trace near the VSS pin. This reduces ADC noise by 30-50%.
The RA4 pin (pin 18) is open-drain and requires an external pull-up resistor (typically 4.7 kΩ to VDD) when used as a digital output - failure to add this pull-up is a common board bring-up issue. Additionally, the MCLR pin (pin 4) is configured as a reset input by default and requires a 10 kΩ pull-up to VDD for normal operation; leaving MCLR floating causes intermittent resets. When using the internal RC oscillator, the OSCO pin must be left unconnected.
The PIC16C711T-04I/SS ADC reference defaults to VDD, which means power-rail noise directly couples into conversion results. For higher precision, drive the RA3/AN3/VREF pin with a dedicated 5.0 V reference such as MCP1541 or LM4040 - this improves ADC noise performance by 4-6 LSB at 8-bit resolution. Sample-and-hold acquisition time is 19.72 µs minimum according to the datasheet; do not exceed the 8 ADC-clock conversion period without consulting the electrical characteristics table.
合規資訊
RoHS and REACH compliant per Microchip product page. Lead-free (Pb-free) matte-tin finish. Not AEC-Q100 qualified - for automotive safety-critical applications choose a Q-graded PIC16 variant. Halogen-free per JEDEC JS709B. Conflict-mineral (3TG) reporting available under Microchip Dodd-Frank compliance program.
