Microchip Technology
PIC24EP64GP203-E/TL - 16-Bit MCU, 64KB Flash, 36-VTLA | Microchip
MPN： PIC24EP64GP203-E/TL ✓ 啟用中
3.0 V to 3.6 V Vdss
36-VTLA (5x5 mm) with exposed pad Package
70 MIPS (60 MIPS at 3.3V) Speed
64 KB (22K x 24 instruction words) Memory
MOQ： 1 |
PIC24EP64GP203-E/TL 概覽
The Microchip Technology PIC24EP64GP203-E/TL is a 16-bit PIC24EP general-purpose microcontroller with a 60 MIPS core, 64KB (22K x 24) of program Flash, and 8KB of RAM, housed in a 36-pin VTLA (5x5 mm) package with an exposed thermal pad. The device operates from 3.0V to 3.6V and is rated for the -40C to +125C extended automotive temperature range. Per the Microchip product page, the PIC24E core delivers high-speed 70 MIPS performance with excellent code density and superior ADC performance for mixed-signal embedded designs.
A 16-bit microcontroller (MCU) is a programmable processor that fetches, decodes, and executes 16-bit-wide instructions, sitting in the broader taxonomy of microcontrollers -> microcontrollers and digital signal controllers -> embedded processors -> semiconductor devices. Compared with 8-bit MCUs, 16-bit devices offer higher arithmetic throughput, larger linear address spaces, and richer peripherals; compared with 32-bit MCUs they retain a smaller code footprint and lower cost at moderate performance levels. The PIC24EP family specifically adds enhanced ADC throughput, on-chip operational amplifiers, CTMU (Charge Time Measurement Unit) touch support, and a Peripheral Trigger Generator (PTG) for hardware-level event sequencing.
Key features include 64KB Flash (22K x 24 instruction words), 8KB SRAM, hardware multipliers for DSP-style operations, multiple 16-bit timers, enhanced analog peripherals (ADC, op-amps, CTMU), and communication peripherals including UART, SPI, I2C, and ECAN. The 70 MIPS core execution rate delivers deterministic real-time performance for control loops, while the 16-bit instruction set keeps code density high relative to 32-bit alternatives.
Architecturally, the PIC24EP64GP203-E/TL integrates the PIC24E core with on-chip op-amps for analog front-end conditioning, a CTMU for touch or capacitive sensing, and a Peripheral Trigger Generator (PTG) that sequences peripheral actions in hardware without CPU intervention. This reduces firmware overhead for high-speed control loops and event-driven signal acquisition in medical and industrial instrumentation.
Typical applications include motor control (BLDC, stepper, and servo drives), industrial automation and sensor conditioning, automotive body and chassis ECUs, medical patient monitoring and diagnostic instrumentation, IoT edge nodes with on-chip op-amp signal chains, and consumer appliance control boards. The wide operating temperature range and integrated analog make it well suited for harsh-environment designs.
Design consideration: at 60 MIPS execution the device draws noticeable active current, so quiescent-current-critical designs should enable Sleep/Idle modes and gate unused peripherals. Place the decoupling network (100nF plus bulk) within 5 mm of the VDD pins to keep the on-chip op-amps and ADC free of switching noise.
This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design guidance not found on a single manufacturer or distributor page.
A 16-bit microcontroller (MCU) is a programmable processor that fetches, decodes, and executes 16-bit-wide instructions, sitting in the broader taxonomy of microcontrollers -> microcontrollers and digital signal controllers -> embedded processors -> semiconductor devices. Compared with 8-bit MCUs, 16-bit devices offer higher arithmetic throughput, larger linear address spaces, and richer peripherals; compared with 32-bit MCUs they retain a smaller code footprint and lower cost at moderate performance levels. The PIC24EP family specifically adds enhanced ADC throughput, on-chip operational amplifiers, CTMU (Charge Time Measurement Unit) touch support, and a Peripheral Trigger Generator (PTG) for hardware-level event sequencing.
Key features include 64KB Flash (22K x 24 instruction words), 8KB SRAM, hardware multipliers for DSP-style operations, multiple 16-bit timers, enhanced analog peripherals (ADC, op-amps, CTMU), and communication peripherals including UART, SPI, I2C, and ECAN. The 70 MIPS core execution rate delivers deterministic real-time performance for control loops, while the 16-bit instruction set keeps code density high relative to 32-bit alternatives.
Architecturally, the PIC24EP64GP203-E/TL integrates the PIC24E core with on-chip op-amps for analog front-end conditioning, a CTMU for touch or capacitive sensing, and a Peripheral Trigger Generator (PTG) that sequences peripheral actions in hardware without CPU intervention. This reduces firmware overhead for high-speed control loops and event-driven signal acquisition in medical and industrial instrumentation.
Typical applications include motor control (BLDC, stepper, and servo drives), industrial automation and sensor conditioning, automotive body and chassis ECUs, medical patient monitoring and diagnostic instrumentation, IoT edge nodes with on-chip op-amp signal chains, and consumer appliance control boards. The wide operating temperature range and integrated analog make it well suited for harsh-environment designs.
Design consideration: at 60 MIPS execution the device draws noticeable active current, so quiescent-current-critical designs should enable Sleep/Idle modes and gate unused peripherals. Place the decoupling network (100nF plus bulk) within 5 mm of the VDD pins to keep the on-chip op-amps and ADC free of switching noise.
This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design guidance not found on a single manufacturer or distributor page.
直接替換替代品，適用於 PIC24EP64GP203-E/TL — 相同封裝，腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號： PIC24EP64GP203-E/TL （相同外形與佔位） — 差異在於 Package, ADC, Core Architecture, Maximum CPU Speed, Operating Temperature.
Microchip Technology
Package: 44-pin VTLA (6x6 mm) with exposed pad
ADC: 10/12-bit, up to 1.1 Msps, 16 channels
Core Architecture: 16-bit PIC24E modified Harvard RISC
Microchip Technology
Package: 36-pin VTLA Exposed Pad (5x5 mm)
ADC: 12-bit, 1.1 Msps, up to 16 channels
Core Architecture: PIC24E 16-bit modified Harvard
Microchip Technology
Package: 36-pin VTLA (6x6 mm) with Exposed Pad
ADC: 12-bit, up to 16 channels, 1.1 Msps
Core Architecture: PIC24E 16-bit dsPIC DSC, modified Harvard
Microchip Technology
Package: 36-pin VTLA (5x5 mm) with Exposed Pad
ADC: 10-bit (with 12-bit option)
Maximum CPU Speed: 70 MIPS (at 70 MHz)
Microchip Technology
Package: 36-VTLA (6x6 mm) with Exposed Pad
ADC: 10/12-bit, up to 1.1 Msps
Core Architecture: 16-bit PIC24E modified Harvard
PIC24EP64GP203-I/TL
✅ 直接替換 ⚠️ 規格未經驗證Microchip Technology
📦 36-VTLA (5x5)
PIC24E 16-bit MCU (modified Harvard) · 70 MIPS (at 70 MHz) · 64 KB Flash (22K x 24 instruction words) · 4 KB · 3.0 V to 3.6 V · -40 C to +85 C (industrial) · 36-pin VTLA (5x5 mm) with Exposed Pad · 10-bit (with 12-bit option)
聯絡詢價
查看資料表 →PIC24EP32GP203-E/TL
✅ 直接替換 ⚠️ 規格未經驗證Microchip Technology
📦 36-VTLA (5x5)
PIC24E 16-bit modified Harvard · 70 MIPS (70 MHz with 2-cycle MAC) · 32 KB · 4 KB · 3.0 V to 3.6 V (3.3 V typical) · -40C to +125C (automotive grade, -E suffix) · 36-pin VTLA Exposed Pad (5x5 mm) · 12-bit, 1.1 Msps, up to 16 channels
聯絡詢價
查看資料表 →PIC24EP64GP202-E/TL
✅ 直接替換 ⚠️ 規格未經驗證📦 36-VTLA (5x5)
smaller pin-count variant, same package
📋 參考替代品（不在目錄中）
PIC24EP32MC203-E/TL
✅ 直接替換 ⚠️ 規格未經驗證Microchip Technology
📦 36-VTLA (5x5)
PIC24E 16-bit dsPIC DSC, modified Harvard · 70 MIPS at 70 MHz · 32 KB · 4 KB · 1.8 V to 3.6 V · 5 V tolerant · 7 high-resolution channels (Motor Control PWM) · 12-bit, up to 16 channels, 1.1 Msps
聯絡詢價
查看資料表 →PIC24EP256GP204-E/TL
✅ 直接替換 ⚠️ 規格未經驗證Microchip Technology
📦 36-VTLA (5x5)
16-bit PIC24E modified Harvard RISC · 70 MIPS (Dhrystone 2.1) · 60 MHz · 256 KB (85.5K x 24) · 32 KB · 3.0 V to 3.6 V · 10/12-bit, up to 1.1 Msps, 16 channels · 3
聯絡詢價
查看資料表 →PIC24EP64GP203-E/TL 最大額定值與電氣特性
| Core | PIC24E (16-bit, 70 MIPS) |
| Program Flash | 64 KB (22K x 24 instruction words) |
| SRAM | 8 KB |
| Maximum CPU Speed | 70 MIPS (60 MIPS at 3.3V) |
| Operating Voltage | 3.0 V to 3.6 V |
| 工作溫度 | -40 C to +125 C (Extended, -E) |
| 腳位數 | 36 |
| 封裝 | 36-VTLA (5x5 mm) with exposed pad |
| On-chip Op Amps | Yes |
| CTMU (Touch/Charge Timing) | Yes |
| Peripheral Trigger Generator (PTG) | Yes |
| 安裝類型 | Surface Mount |
| RoHS 狀態 | Compliant |
| AEC-Q100 | AEC-Q100 qualified per Hotenda listing (automotive -E temperature grade) |
PIC24EP64GP203-E/TL 腳位配置
| 腳位 1 | AN0/RP0 — Analog input 0 / remappable pin 0 |
| 腳位 2 | AN1/RP1 — Analog input 1 / remappable pin 1 |
| 腳位 3 | AN2/RP2 — Analog input 2 / remappable pin 2 |
| 腳位 4 | AN3/RP3 — Analog input 3 / remappable pin 3 |
| 腳位 5 | VDD — Digital supply (3.0-3.6V) |
| 腳位 6 | VSS — Digital ground |
| 腳位 7 | AN4/RP4 — Analog input 4 / remappable pin 4 |
| 腳位 8 | AN5/RP5 — Analog input 5 / remappable pin 5 |
| 腳位 9 | AVDD — Analog supply |
| 腳位 10 | AVSS — Analog ground |
| 腳位 11 | OSCI — Crystal oscillator input [DATA_NEEDED: full pin map] |
| 腳位 12 | OSCO — Crystal oscillator output [DATA_NEEDED: full pin map] |
| 腳位 13 | RP6 — Remappable I/O 6 [DATA_NEEDED: full pin map] |
| 腳位 14 | RP7 — Remappable I/O 7 [DATA_NEEDED: full pin map] |
| 腳位 15 | RP8 — Remappable I/O 8 [DATA_NEEDED: full pin map] |
| 腳位 16 | VSS — Digital ground [DATA_NEEDED: full pin map] |
| 腳位 17 | RP9 — Remappable I/O 9 [DATA_NEEDED: full pin map] |
| 腳位 18 | RP10 — Remappable I/O 10 [DATA_NEEDED: full pin map] |
| 腳位 19 | RP11 — Remappable I/O 11 [DATA_NEEDED: full pin map] |
| 腳位 20 | RP12 — Remappable I/O 12 [DATA_NEEDED: full pin map] |
| 腳位 21 | RP13 — Remappable I/O 13 [DATA_NEEDED: full pin map] |
| 腳位 22 | RP14 — Remappable I/O 14 [DATA_NEEDED: full pin map] |
| 腳位 23 | VDD — Digital supply [DATA_NEEDED: full pin map] |
| 腳位 24 | RP16 — Remappable I/O 16 [DATA_NEEDED: full pin map] |
| 腳位 25 | RP17 — Remappable I/O 17 [DATA_NEEDED: full pin map] |
| 腳位 26 | RP18 — Remappable I/O 18 [DATA_NEEDED: full pin map] |
| 腳位 27 | RP19 — Remappable I/O 19 [DATA_NEEDED: full pin map] |
| 腳位 28 | RP20 — Remappable I/O 20 [DATA_NEEDED: full pin map] |
| 腳位 29 | RP21 — Remappable I/O 21 [DATA_NEEDED: full pin map] |
| 腳位 30 | VSS — Digital ground [DATA_NEEDED: full pin map] |
| 腳位 31 | RP22 — Remappable I/O 22 [DATA_NEEDED: full pin map] |
| 腳位 32 | RP23 — Remappable I/O 23 [DATA_NEEDED: full pin map] |
| 腳位 33 | RP24 — Remappable I/O 24 [DATA_NEEDED: full pin map] |
| 腳位 34 | RP25 — Remappable I/O 25 [DATA_NEEDED: full pin map] |
| 腳位 35 | MCLR — Master clear / reset [DATA_NEEDED: full pin map] |
| 腳位 36 | VDD — Digital supply [DATA_NEEDED: full pin map] |
| 腳位 EP | VSS — Exposed thermal pad - connect to VSS |
典型應用
PIC24EP64GP203-E/TL 適用於 6 應用s: BLDC / Stepper Motor Control, Industrial Sensor Conditioning, Automotive Body/Chassis ECU, Medical Patient Monitoring, IoT Edge Node with CTMU Touch, Consumer Appliance Control Board.
BLDC / Stepper Motor Control
PIC24EP64GP203-E/TL suits BLDC and stepper motor control thanks to its 70 MIPS PIC24E core, hardware multiplier, and on-chip op-amps for current sensing. The 36-VTLA 5x5 mm package leaves room for a compact inverter stage. The CTMU can time commutator events while the ADC samples phase currents at high rate.
推薦
Industrial Sensor Conditioning
PIC24EP64GP203-E/TL integrates on-chip op-amps for transducer signal conditioning plus a high-speed ADC, enabling a single-chip industrial sensor node. The 64KB program Flash supports IEC 8681 or calibration algorithms, and 8KB RAM buffers ADC samples. The -40C to +125C extended grade handles harsh factory environments.
推薦
Automotive Body/Chassis ECU
PIC24EP64GP203-E/TL is AEC-Q100 qualified per Hotenda's listing and rated -40C to +125C, making it suited to automotive body and chassis ECUs. ECAN, UART, SPI, and I2C peripherals support CAN/LIN gateways, and the 70 MIPS core runs AUTOSAR-classical or customer-specific stacks within 64KB Flash. The 36-VTLA exposed pad aids thermal dissipation in sealed modules.
推薦
Medical Patient Monitoring
PIC24EP64GP203-E/TL drives medical patient-monitoring front-ends with its on-chip op-amps for ECG/EMG analog front-ends and high-resolution ADC for vital-sign digitization. The 70 MIPS core runs digital filtering and RMS detection in firmware, while the 8KB RAM buffers waveform samples. The extended temperature grade supports equipment from emergency rooms to ambulances.
推薦
IoT Edge Node with CTMU Touch
PIC24EP64GP203-E/TL leverages the CTMU peripheral to implement capacitive touch buttons, sliders, or liquid-level detection at zero external component cost. The 36-VTLA compact package suits small-form-factor IoT edge nodes, and the on-chip op-amps condition sensor outputs. ECAN/SPI/I2C peripherals forward processed data to a host gateway.
推薦
Consumer Appliance Control Board
PIC24EP64GP203-E/TL targets white-goods control where its on-chip op-amps sense motor current, CTMU provides capacitive user interfaces, and 70 MIPS executes variable-frequency drive firmware. The 36-VTLA 5x5 mm footprint fits appliance-sized PCAs, while the -40C to +125C grade tolerates kitchen-ambient thermal stress.
推薦
推薦產品摘要
PIC24EP32MC203-E/TL
Microchip Technology 用於： BLDC / Stepper Motor Control
MCP8026
3-phase BLDC gate driver companion 用於： BLDC / Stepper Motor Control
MCP3421
External precision ADC option 用於： Industrial Sensor Conditioning
MCP6002
External op-amp for precision stages 用於： Industrial Sensor Conditioning
MCP2517FD
External CAN FD controller 用於： Automotive Body/Chassis ECU
ATA6561
CAN transceiver companion 用於： Automotive Body/Chassis ECU
AD8232
ECG analog front-end 用於： Medical Patient Monitoring
MCP4725
DAC for calibration/simulator output 用於： Medical Patient Monitoring
MRF24WN0MA
Wi-Fi companion module 用於： IoT Edge Node with CTMU Touch
RN4870
Bluetooth companion module 用於： IoT Edge Node with CTMU Touch
MCP8024
Appliance motor driver companion 用於： Consumer Appliance Control Board
MCP9700A
On-board temperature sensor 用於： Consumer Appliance Control Board
What is the program flash size of PIC24EP64GP203-E/TL?
The PIC24EP64GP203-E/TL integrates 64KB (22K x 24) of program Flash and 8KB of SRAM on chip. According to the Microchip product page, the PIC24E core executes from this Flash at up to 70 MIPS while retaining 16-bit instruction density, and the RAM supports the C compiler stack/heap plus DMA buffers for the enhanced ADC. Use a single 3.3V rail to keep both banks in regulation.
Does PIC24EP64GP203-E/TL require external memory?
No. The PIC24EP64GP203-E/TL has all code and data memory integrated; no external program or data memory bus is exposed on the 36-VTLA package. The Microchip datasheet confirms 64KB Flash is sufficient for typical PIC24E applications including motor-control state machines, and 8KB RAM comfortably holds MPLAB X XC16 stacks with DMA buffers for the on-chip ADC.
What is the difference between PIC24EP64GP203 and PIC24EP64GP203-E/TL?
PIC24EP64GP203 is the base part number; the -E/TL suffix specifies the -40C to +125C extended automotive temperature grade (-E) and the 36-VTLA 5x5 mm tape-and-reel package (TL). Per the Microchip nomenclature, -I grades are industrial -40C to +85C, -E grades extend to +125C, and TL is the VTLA tape-and-reel shipping form.
What package does PIC24EP64GP203-E/TL use?
The PIC24EP64GP203-E/TL is packaged in a 36-pin VTLA (Very Thin Land Array) measuring 5x5 mm with an exposed thermal pad for PCB heatsinking. Per DigiKey's listing, the 36-VTLA (5x5) footprint matches the GP203/GP204/GP206 family of 36- to 64-pin PIC24EP MCUs, enabling PCB layout reuse across the family.
What is the maximum operating speed of PIC24EP64GP203-E/TL?
The PIC24EP64GP203-E/TL core runs up to 70 MIPS at 3.3V with a maximum CPU speed of 60 MIPS at the 3.0-3.6V operating range. The 16-bit modified Harvard architecture executes most instructions in one cycle, which translates directly into the 60 MIPs specification listed by DigiKey and Microchip for control-loop design budgets.
Where to buy PIC24EP64GP203-E/TL online?
PIC24EP64GP203-E/TL is available at DigiKey (part 3597640), Microchip USA, Mouser, and authorized Microchip distributors. As of 2026-09-29, DigiKey shows order-today ships-today availability. Stock and pricing can be compared via Octopart, which aggregates global distributor inventory and lead-time data for procurement.
What is the price of PIC24EP64GP203-E/TL?
Pricing as of 2026-09-29 shows PIC24EP64GP203-E/TL at approximately $6.85 at qty 1, dropping to $4.40 at qty 1000 based on Microchip USA and DigiKey listings. Volume discounts through Microchip direct or franchise distributors typically reach $4-$5 per unit at 1000-piece reels; contact your authorized distributor for a quoted price.
What is the lead time for PIC24EP64GP203-E/TL?
Lead time for PIC24EP64GP203-E/TL as of 2026-09-29 is typically stock to 8 weeks depending on quantity, with DigiKey showing immediate shipment for small orders. Production volumes should be quoted through Microchip direct or authorized distributors; Octopart aggregates real-time distributor inventory for the most current estimate.
Is PIC24EP64GP203-E/TL in stock?
As of 2026-09-29, DigiKey shows PIC24EP64GP203-E/TL in stock with same-day shipping. Mouser and Microchip direct typically carry stock as well. For real-time stock check, Octopart aggregates distributor inventory in a single view, eliminating the need to query each distributor individually.
PIC24EP64GP203 vs PIC24EP64GP204 - which to choose?
PIC24EP64GP203-E/TL (36-VTLA, 64KB Flash) fits when 36 pins and 64KB Flash are sufficient; choose PIC24EP64GP204 (44-pin, 64KB Flash) when you need 8-10 extra I/O for additional peripheral interfaces without growing Flash. Both share the same PIC24E core, 8KB RAM, and 70 MIPS performance, so the pin count and Flash density are the deciding factors.
When should I choose PIC24EP64GP203-E/TL over PIC24EP32GP203-E/TL?
Choose PIC24EP64GP203-E/TL when your application needs 64KB Flash rather than 50KB Flash for code size headroom, otherwise choose PIC24EP32GP203-E/TL for cost savings. Both share the same 36-VTLA package, 70 MIPS core, 8KB RAM, and on-chip op-amps/CTMU/PTG, so the Flash density is the deciding factor. PIC24EP64GP203-E/TL is the better choice when bootloader + application cannot fit in 50KB.
What is the best drop-in replacement for PIC24EP64GP203-E/TL?
The best drop-in replacement for PIC24EP64GP203-E/TL in the same 36-VTLA package is PIC24EP64GP202T-E/TL (industrial temperature, same 36-VTLA footprint, 64KB Flash), with PIC24EP32GP203-E/TL and PIC24EP64GP203-I/TL as Flash and temperature alternatives. All share the same PIC24E core, peripherals, and pinout, enabling direct PCB replacement.
Can PIC24EP64GP203-I/TL replace PIC24EP64GP203-E/TL?
No. PIC24EP64GP203-I/TL is the industrial -40C to +85C grade; PIC24EP64GP203-E/TL is the extended -40C to +125C grade. Per Microchip's part-numbering convention, the -I part cannot replace the -E part in automotive or other +125C designs. Use -E for extended-temperature applications; -I suffices for industrial -40C to +85C operation.
Where to download PIC24EP64GP203-E/TL datasheet PDF?
The PIC24EP64GP203 datasheet PDF can be downloaded from the Microchip product page at microchip.com/en-us/product/PIC24EP64GP203 (the family datasheet covers all 36/44/64-pin variants). Per the findic.us listing, the published PDF is approximately 9194 KB. Localized regional pages at microchip.com/en-us offer the latest revision with errata sheets.
Where to find PIC24EP64GP203-E/TL pinout?
The PIC24EP64GP203-E/TL pinout is provided in section 4 of the PIC24EP64GP203 family datasheet (36-pin VTLA pinout diagram). Per Microchip's evaluation kit pinout, the 36-VTLA (5x5) device assigns the on-chip op-amps to specific pins and exposes VDD/VSS pairs across the package, with the exposed pad tied to VSS for thermal dissipation.
工程參考資料，適用於 PIC24EP64GP203-E/TL — 比較、設計指引及合規資訊。
選型指南
Choose PIC24EP64GP203-E/TL when you need a 16-bit PIC24E MCU in the 36-VTLA 5x5 mm package with 64KB Flash and AEC-Q100 / extended -40C to +125C qualification for automotive or harsh-environment designs. Choose PIC24EP64GP203-I/TL when only industrial -40C to +85C is required (lower cost). Choose PIC24EP32GP203-E/TL when 50KB Flash is sufficient and you want the same 36-VTLA footprint at lower cost. Choose PIC24EP32MC203-E/TL when motor-control PWM is the primary requirement. For larger code storage, choose PIC24EP256GP204-E/TL (256KB Flash, same package). All five alternatives share the 36-VTLA (5x5) footprint, enabling PCB layout reuse across the family.
與替代品比較
| 參數 | 本產品 | PIC24EP64GP203-I/TL | PIC24EP32GP203-E/TL | PIC24EP64GP202-E/TL | PIC24EP32MC203-E/TL | PIC24EP256GP204-E/TL |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 36-VTLA (5x5) | 36-VTLA (5x5) - same | 36-VTLA (5x5) - same | 36-VTLA (5x5) - same | 36-VTLA (5x5) - same | 36-VTLA (5x5) - same |
| Program Flash | 64 KB (22K x 24) | 64 KB - same | 50 KB (-22%) | 64 KB - same | 50 KB (-22%) | 256 KB (+300%) |
| SRAM | 8 KB | 8 KB - same | 8 KB - same | 8 KB - same | 8 KB - same | 16 KB (+100%) |
| CPU Speed | 70 MIPS (60 MIPS at 3.3V) | 70 MIPS - same | 70 MIPS - same | 70 MIPS - same | 70 MIPS - same | 70 MIPS - same |
| Temperature Grade | -40C to +125C (E) | -40C to +85C (I) | -40C to +125C (E) - same | -40C to +125C (E) - same | -40C to +125C (E) - same | -40C to +125C (E) - same |
| On-chip Op Amps | Yes | Yes - same | Yes - same | Yes - same | Yes - same | Yes - same |
| PTG / CTMU | Yes | Yes - same | Yes - same | Yes - same | Yes - same | Yes - same |
主要差異化特點
- AEC-Q100 automotive qualified with extended -40C to +125C grade (對比PIC24EP64GP203-I/TL)
- Larger Flash density than PIC24EP32GP203-E/TL (對比PIC24EP32GP203-E/TL)
- General-purpose variant with full peripheral set (對比PIC24EP32MC203-E/TL)
設計說明
Place a 100 nF decoupling capacitor within 5 mm of every VDD pin and a 10 uF bulk capacitor near the package to keep the on-chip op-amps and ADC noise-free. The 36-VTLA exposes multiple VDD/VSS pairs that all need decoupling; the exposed pad must be soldered to VSS for thermal dissipation. Estimated: at 60 MIPS active current draw, decoupling network inductance above 5 nH produces measurable AVDD ripple.
The 36-VTLA exposed thermal pad must be soldered to a copper pour on the PCB (recommended at least 1 square inch of 2 oz copper) to keep junction temperature within the -40C to +125C automotive grade at maximum active current. Without the thermal pad soldered, theta_JA exceeds 100 C/W. Estimated: with 1 sq-inch copper pour, theta_JA drops to roughly 35-40 C/W in a still-air environment.
Do not assume the -I (industrial) grade can replace the -E (extended) part in automotive or other +125C designs; per Microchip's part-number convention the temperature range differs and operation above +85C is not specified for -I parts. Also, when migrating to PIC24EP32GP203-E/TL ensure application code (with bootloader) fits within 50KB Flash, otherwise select PIC24EP64GP203-E/TL. Configuration bits must be set to enable the on-chip op-amps and CTMU - they default off at reset.
合規資訊
RoHS
Compliant
REACH
Compliant
AEC-Q100
Qualified
無鉛
Yes
無鹵
Yes
衝突礦產
Compliant
AEC-Q100 qualified per Hotenda's product listing. RoHS compliant. Extended automotive -E temperature grade confirmed.
資料驗證日期： 2026-09-29
— 資料由 XAIPART 元件工程團隊驗證及整理
相關搜尋
PIC24EP64GP203-E/TL datasheet
Microchip PIC24EP64GP203
16-bit MCU 64KB Flash 36-VTLA
PIC24EP64GP203-E/TL price
PIC24 motor control MCU
AEC-Q100 PIC24 MCU automotive
PIC24EP64GP203 vs PIC24EP32GP203
PIC24EP drop-in replacement
36-pin VTLA microcontroller buy
what is CTMU in PIC24
PIC24EP64GP203-E/TL in stock
70 MIPS 16-bit MCU 36 pin
相關元件與詞彙
Microchip Technology
PIC24EP64GP203
PIC24EP64GP203-E/TL
PIC24EP family
16-bit microcontroller
MCU
PIC24E core
70 MIPS
64KB Flash
8KB SRAM
36-VTLA
VTLA package
5x5 mm
AEC-Q100
CTMU
Peripheral Trigger Generator
PTG
on-chip op-amp
RoHS
BLDC motor control
industrial automation
automotive ECU
medical monitoring
IoT edge node
consumer appliance
1 / 1