PIC24FJ64GA202-E/MM - 32MHz Low-Power Crypto MCU | Microchip
MPN: PIC24FJ64GA202-E/MM ✓ 啟用中PIC24FJ64GA202-E/MM 概覽
A PIC24F microcontroller is a 16-bit RISC-based embedded controller within Microchip's broader MCU product hierarchy. The GA2 series combines general-purpose control, flash program memory, low-power operating modes, and hardware-assisted cryptography. Its 28-pin QFN-S package supports compact PCB layouts while exposing communication, digital I/O, analog, timing, and programming resources for embedded systems.
The controller provides 64 KB of flash memory, 8 KB of SRAM, a 16-bit architecture, and operation up to 32 MHz. Its integrated cryptography capabilities distinguish the GA2 family from basic general-purpose PIC24F devices. Suitable applications include connected industrial equipment, secure access terminals, battery-powered sensors, data-logging systems, and embedded products that must protect stored credentials or communicate with authenticated peripherals.
The -E/MM ordering code identifies an extended-temperature device supplied in the 28-QFN-S 6 x 6 mm package. The exposed-pad construction supports improved heat transfer from the microcontroller, although actual performance still depends on PCB copper, thermal vias, ambient temperature, and switching activity. Designers should consult the PIC24FJ64GA family documentation for the complete pin map, electrical limits, decoupling requirements, and programming connections.
Common application patterns place the MCU between sensors or communication peripherals and an embedded user interface. The 32 MHz processing rate supports responsive control and protocol handling, while low-power modes help reduce average consumption in battery-operated products. Security-oriented designs can use the integrated crypto engine and key-storage functions instead of implementing equivalent cryptographic primitives entirely in software.
Layout and firmware planning are critical in a 28-QFN-S design. Place the required decoupling capacitors close to their associated supply pins, preserve the manufacturer's exposed-pad land pattern, route programming and debug signals for reliable access, and confirm all unused pins against the family pin-description table. Production programming should use a Microchip-compatible programmer or validated programming fixture.
This product page organizes the Microchip family specifications, verified lifecycle status, package details, and supported ordering variants for rapid engineering review. It also identifies the closest documented same-family alternatives and highlights where temperature grade, flash capacity, package selection, or peripheral configuration must be reviewed before PCB reuse.
直接替換替代品,適用於 PIC24FJ64GA202-E/MM — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: PIC24FJ64GA202-E/MM (相同外形與佔位) — 差異在於 Package, Core Architecture, Operating Temperature, RoHS Status.
PIC24FJ64GA202-I/MM
✅ 直接替換聯絡詢價
查看資料表 →PIC24FJ64GA202-E/SO
✅ 直接替換聯絡詢價
查看資料表 →PIC24FJ64GA204-E/MM
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
PIC24FJ64GA204-I/MM
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
PIC24FJ64GA202-E/MM 最大額定值與電氣特性
| Microcontroller Family | PIC24F GA2 |
| Architecture | 16-bit RISC |
| Maximum CPU Frequency | 32 MHz |
| Program Memory Size | 64 KB (64K x 8) |
| RAM Size | 8 KB (8K x 8) |
| Number of I/O | 21 |
| 供應電壓 | 2.5 V to 3.3 V |
| 封裝 | 28-QFN-S (6 x 6 mm) |
| 安裝類型 | Surface Mount |
| Exposed Pad | Yes |
| Low Power Technology | eXtreme Low Power (XLP) |
| Cryptographic Engine | Yes |
| Key Storage | Yes |
| Random Number Generator | Yes |
| Temperature Grade | Extended commercial grade |
| Program Memory Type | Flash |
PIC24FJ64GA202-E/MM 28-qfn-s (6 x 6 mm) 腳位配置指南
PIC24FJ64GA202-E/MM(28-qfn-s (6 x 6 mm) 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: PIC24FJ64GA202-E/MM.
請參閱 資料表 以查看完整腳位配置。
典型應用
PIC24FJ64GA202-E/MM 適用於 6 應用s: Battery-Powered IoT Sensor Nodes, Secure Access and Authentication Terminals, Industrial Data-Logging Equipment, Connected Healthcare Monitors, Secure Wireless Sensor Gateways, Battery-Powered Remote Controls.
Battery-Powered IoT Sensor Nodes
The PIC24FJ64GA202-E/MM fits compact sensor nodes that need deterministic 16-bit control, 64 KB of flash, and hardware-assisted security without the footprint of a larger MCU. Its 32 MHz operating speed supports local filtering, sensor management, and protocol handling, while PIC24F XLP modes can reduce energy use during idle periods. The integrated cryptographic engine, key storage, and random number generator are useful when sensor readings, device identities, or wireless credentials must be protected. A 28-QFN-S 6 x 6 mm package also leaves board area for the radio, sensor circuitry, and power-management components required by a compact IoT product.
推薦
Secure Access and Authentication Terminals
The PIC24FJ64GA202-E/MM is appropriate for access-control terminals and authentication products that must combine responsive user-interface handling with protected credentials. The 32 MHz 16-bit processor can manage keypad input, display updates, event logging, and communications, while the 64 KB flash provides room for application firmware and configuration data. Its integrated crypto engine and key-storage capability reduce the implementation burden associated with cryptographic primitives, and the random number generator supports security protocols requiring nondeterministic values. The exposed-pad QFN-S construction also helps remove heat from the MCU in continuously active equipment.
推薦
Industrial Data-Logging Equipment
The PIC24FJ64GA202-E/MM can serve as the local controller in industrial data loggers that collect sensor measurements, timestamp events, and manage local storage or communications. Its 16-bit architecture and 32 MHz clock provide adequate throughput for protocol handling, filtering, and real-time control, while 64 KB of flash accommodates firmware and data structures. The 21 available I/O support digital sensors, status indicators, and external interfaces. The -E/MM temperature designation supports extended-commercial deployments, and the small 28-QFN-S 6 x 6 mm package assists compact panel-mounted instrumentation. Firmware should include data integrity controls because security hardware does not replace application-level validation.
推薦
Connected Healthcare Monitors
The PIC24FJ64GA202-E/MM is suitable for compact healthcare monitoring products that need local signal conditioning, user-interface control, and protected data handling. At 32 MHz, the 16-bit MCU can coordinate sensor sampling, filtering, threshold evaluation, and communication without relying on a higher-power processor. Hardware-assisted cryptography can protect pairing credentials and stored records, while low-power operation benefits portable clinical accessories. The 28-QFN-S package supports space-constrained designs, although medical-product development must apply the relevant risk-management, software-validation, and electrical-safety processes for the finished equipment. The MCU alone does not determine medical-device compliance.
推薦
Secure Wireless Sensor Gateways
The PIC24FJ64GA202-E/MM can act as the control and security hub in a small wireless sensor gateway. Its 32 MHz 16-bit core can supervise sensor acquisition, maintain protocol timing, and coordinate data exchange with a wireless module over serial or digital interfaces. The 64 KB flash supports gateway firmware, while the integrated crypto engine, key storage, and random number generator help protect device enrollment and message-security processes. Low-power operating features are particularly valuable in gateways that spend substantial time idle. Designers should partition real-time communications carefully, provide adequate decoupling, and verify the exposed-pad thermal design when radio activity creates local heating.
推薦
Battery-Powered Remote Controls
The PIC24FJ64GA202-E/MM suits compact remote controls and handheld accessories that need responsive input handling, wireless coordination, and protected configuration data. Its 32 MHz 16-bit architecture can scan controls, update indicators, and process communication commands while consuming little power between user interactions. The integrated cryptographic engine and key storage can support authenticated command paths or protected configuration parameters, and the 64 KB flash is sufficient for a focused embedded application. Its 28-QFN-S 6 x 6 mm package enables small handheld layouts. Battery and radio design should be evaluated separately because the MCU's low-power capability does not determine the complete product consumption.
推薦
推薦產品摘要
工程參考資料,適用於 PIC24FJ64GA202-E/MM — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | PIC24FJ64GA202-I/MM | PIC24FJ64GA202 | PIC24FJ64GA204-E/MM | PIC24FJ64GA204-I/MM |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 28-QFN-S (6 x 6 mm) | 28-QFN-S (6 x 6 mm) | 28-QFN-S (6 x 6 mm) | 28-QFN-S (6 x 6 mm) | 28-QFN-S (6 x 6 mm) |
主要差異化特點
- Hardware-assisted cryptographic capability in a low-power 16-bit MCU (對比PIC24FJ64GA002)
- 32 MHz processing with 64 KB of program flash (對比PIC24FJ64GA202-I/MM)
- Compact 6 x 6 mm exposed-pad footprint (對比PIC24FJ64GA204-E/MM)
設計說明
Follow the manufacturer land pattern for the 28-QFN-S exposed-pad package exactly. Keep the exposed pad connected to the intended ground plane and use the recommended via arrangement to transfer heat away from the die. Place input and bulk-decoupling capacitors close to their associated power pins, and route sensitive clock, programming, and communications paths away from high-current switching nodes.
Design the supply network around the 2.5 V to 3.3 V operating range and the voltage requirements listed for every attached peripheral. Validate brownout behavior, startup sequencing, and current peaks rather than sizing the rail only from average MCU consumption. The low-power features can reduce average demand, but radio activity, sensor loads, and rapid I/O transitions can create higher instantaneous supply current.
The exposed pad is the primary heat-transfer path from the MCU, but its effectiveness depends on PCB copper and thermal vias. Estimate worst-case junction temperature using the datasheet thermal model, actual ambient conditions, and the calculated internal power dissipation. Reduce clock activity, peripheral loading, or switching losses when thermal margins become small. Do not use a thermal estimate as a substitute for the manufacturer's maximum junction-temperature rating.
Do not substitute a different temperature grade without checking the complete operating-temperature range. Likewise, verify the exposed pad, programming pins, reset behavior, clock options, and peripheral assignments for every same-family candidate. The order code contains meaningful package and grade information, so a matching footprint alone does not prove functional equivalence for a production design.
合規資訊
Compliance status is not stated in the cited product-page and distributor snippets. Confirm the current declarations using the Microchip product page and applicable product documentation.