PIC24FJ64GL305-I/PT - 32MHz 64KB LCD MCU | Microchip
MPN: PIC24FJ64GL305-I/PT ✓ 啟用中PIC24FJ64GL305-I/PT 概覽
A low-power microcontroller is a semiconductor controller optimized to execute firmware while consuming little energy during active and sleep operation. The PIC24FJ64GL305 belongs to the PIC24FJ family of 16-bit RISC microcontrollers with integrated LCD control, Core Independent Peripherals, and eXtreme Low Power capabilities. This device hierarchy combines a 16-bit CPU, Flash memory, RAM, communication interfaces, timing resources, and a segmented display controller in one low-power package.
Key features include 64 KB of Flash memory, operation up to 32 MHz, a segmented LCD controller supporting as many as 256 segments through 8 common and 32 segment outputs, and autonomous LCD animation functions. The LCD subsystem provides alternating dual-display, blinking, blanking, and charge-pump contrast-management functions. Sleep current can fall to a few hundred nanoamperes while retaining complete RAM contents, supporting long-duration battery operation and low-leakage instrumentation.
The controller also provides 10-bit and 12-bit ADC capabilities and uses Core Independent Peripherals to offload communication and peripheral tasks from the main CPU. These resources are useful when firmware must maintain a stable user interface, sample analog inputs, control timing, and respond to external events without relying on frequent software polling. The -40°C to +85°C industrial temperature range supports industrial controls, meters, battery-operated instruments, and connected display modules.
Typical applications include industrial panel meters, handheld measurement equipment, medical monitoring displays, environmental sensors, energy meters, portable instruments, and compact consumer appliances with segmented LCD screens. In each case, the integrated display controller reduces the number of external components, while low sleep consumption extends operating time between battery replacements or maintenance intervals.
Designers should verify the complete 48-pin pinout, oscillator configuration, analog-reference requirements, LCD segment mapping, and decoupling recommendations in the manufacturer datasheet before layout. Keep LCD bias and charge-pump routing short, provide the specified supply and ground connections, and validate timing margins at the maximum intended clock rate. The -I grade is appropriate for industrial environments, while the 48-pin TQFP footprint requires adequate assembly clearance.
This product page consolidates the core device identity, operating characteristics, application guidance, lifecycle and sourcing information, same-footprint alternatives, and practical design considerations into one engineering-focused reference for embedded LCD system development.
直接替換替代品,適用於 PIC24FJ64GL305-I/PT — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: PIC24FJ64GL305-I/PT (相同外形與佔位) — 差異在於 Package, LCD Charge Pump, Core Independent Peripherals (CIPs), Operating Temperature, Sleep Current.
PIC24FJ64GL305T-I/PT
✅ 直接替換聯絡詢價
查看資料表 →PIC24FJ64GL305-E/PT
✅ 直接替換聯絡詢價
查看資料表 →PIC24FJ64GL305T-E/PT
✅ 直接替換📋 參考替代品(不在目錄中)
PIC24FJ64GL305-E/M4
✅ 直接替換聯絡詢價
查看資料表 →PIC24FJ128GL305-I/PT
✅ 直接替換📋 參考替代品(不在目錄中)
PIC24FJ64GL305-I/PT 最大額定值與電氣特性
| Microcontroller Type | 16-bit PIC24F low-power microcontroller |
| 最大時脈頻率 | 32 MHz |
| Performance | 16 MIPS |
| Flash Program Memory | 64 KB |
| Program Memory Organization | 64K x 8 |
| RAM | 8 KB |
| ADC Resolution | 10-bit and 12-bit |
| LCD Controller | Integrated segmented LCD controller |
| Maximum LCD Segments | 256 segments |
| LCD Common Outputs | 8 commons |
| LCD Segment Outputs | 32 segments |
| LCD Animation Features | Alternating dual display, blinking, and blanking |
| Sleep Current | Down to a few hundred nA |
| 工作溫度範圍 | -40°C to +85°C |
| 封裝 | 48-pin TQFP, 7 x 7 mm |
| 安裝類型 | Surface mount |
| Core | 16-bit PIC24F RISC core |
| Peripheral Architecture | Core Independent Peripherals |
| LCD Contrast Management | Integrated charge pump |
PIC24FJ64GL305-I/PT 48-pin tqfp, 7 x 7 mm 腳位配置指南
PIC24FJ64GL305-I/PT(48-pin tqfp, 7 x 7 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: PIC24FJ64GL305-I/PT.
請參閱 資料表 以查看完整腳位配置。
典型應用
PIC24FJ64GL305-I/PT 適用於 6 應用s: Industrial Panel Meters, Battery-Powered Measurement Instruments, Medical Monitoring Displays, Environmental Monitoring Sensors, Energy Meter Displays, Connected Sensor Hubs.
Industrial Panel Meters
The PIC24FJ64GL305-I/PT fits industrial panel meters that combine a segmented LCD with periodic analog measurement and local control functions. Its 16-bit PIC24F core operates up to 32 MHz, while the integrated LCD controller can support as many as 256 segments using 8 common and 32 segment outputs. The 10-bit and 12-bit conversion capabilities support sensor acquisition, and the -40°C to +85°C rating suits factory-floor equipment. A system can keep the display active while placing the core into low-power sleep between readings, reducing energy use without losing RAM state.
推薦
Battery-Powered Measurement Instruments
PIC24FJ64GL305-I/PT is well suited to portable meters and measurement instruments because its sleep current can fall to a few hundred nanoamperes while retaining complete RAM contents. The 32 MHz CPU provides responsive control for calibration, data processing, and keypad-driven menus, while 64 KB of Flash accommodates application firmware and display mappings. The integrated segmented LCD reduces external display-driver overhead. Designers should evaluate regulator quiescent current, LCD load, active-duty-cycle current, and wake timing to determine the overall battery-life benefit.
推薦
Medical Monitoring Displays
The PIC24FJ64GL305-I/PT can serve as the controller in compact medical monitoring equipment with a segmented LCD, such as temperature, pulse, or blood-glucose meters. Its 16-bit processing architecture handles display updates and measurement control, while Core Independent Peripherals can offload communication and timing tasks. The integrated LCD controller supports blinking, blanking, alternating dual-display animation, and charge-pump contrast management, helping create clear status indications. Medical designs must also validate electrical safety, EMC, alarm behavior, and applicable risk requirements independently of the MCU specification.
推薦
Environmental Monitoring Sensors
PIC24FJ64GL305-I/PT is appropriate for compact environmental monitors that display temperature, humidity, air-quality, or industrial-gas readings. Its 10-bit and 12-bit conversion resources can support sampled sensor data, and the 32 MHz CPU can run filtering, compensation, and local logging while the segmented LCD presents measurements and alarm states. Sleep current down to a few hundred nanoamperes is useful for battery-powered field nodes because the controller can retain operating context between measurement intervals. Wake sources, sensor warm-up time, and LCD duty cycle should be included in the field-deployment power budget.
推薦
Energy Meter Displays
The PIC24FJ64GL305-I/PT can control compact energy meters with a segmented LCD for consumption, demand, status, and time-of-use information. Its 16-bit core operates up to 32 MHz for measurement processing and communications, while the integrated segmented LCD controller supports large segment counts and autonomous animation functions. Low sleep current is advantageous in metering equipment that spends most of its time waiting for measurement updates. The design should verify display update latency, tamper-detection response, communication duty cycle, and EMC performance before production release.
推薦
Connected Sensor Hubs
PIC24FJ64GL305-I/PT can act as a local controller in a connected sensor hub that combines a segmented status display with sensing, event handling, and a low-rate communications link. The 32 MHz PIC24F processor is fast enough to service Core Independent Peripherals and manage display updates, while 64 KB of Flash supports protocol handlers and application logic. The LCD subsystem provides readable local feedback without requiring a graphic display. Low-power sleep helps reduce maintenance energy, but radio duty cycle, sensor timing, and bus activity can dominate the final consumption and must be optimized together.
推薦
推薦產品摘要
工程參考資料,適用於 PIC24FJ64GL305-I/PT — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | PIC24FJ64GL305T-I/PT | PIC24FJ64GL305-E/PT | PIC24FJ64GL305T-E/PT | PIC24FJ64GL305 | PIC24FJ128GL305-I/PT |
|---|---|---|---|---|---|---|
| Package | 48-pin TQFP (7x7) | 48-pin TQFP (7x7) | 48-pin TQFP (7x7) | 48-pin TQFP (7x7) | 48-pin TQFP (7x7) | 48-pin TQFP (7x7) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| CPU Architecture | 16-bit PIC24F RISC | 16-bit PIC24F RISC | 16-bit PIC24F RISC | 16-bit PIC24F RISC | 16-bit PIC24F RISC | 16-bit PIC24FJ family |
| Flash Program Memory | 64 KB | 64 KB | 64 KB | 64 KB | 64 KB | 128 KB |
| LCD Controller | Integrated segmented LCD controller | Integrated segmented LCD controller | Integrated segmented LCD controller | Integrated segmented LCD controller | Integrated segmented LCD controller | Integrated segmented LCD controller |
主要差異化特點
- High LCD integration for a 48-pin microcontroller (對比PIC24FJ64GL305-E/PT)
- Industrial temperature coverage (對比PIC24FJ64GL305-E/PT)
- More Flash memory in the same family footprint (對比PIC24FJ64GL305-I/PT)
- Low-power segmented-display integration (對比PIC24FJ64GL305T-I/PT)
設計說明
Assign every physical pin from the 48-pin TQFP pin-description table before routing the PCB. Separate analog inputs from LCD and switching-capacitor charge-pump traces, place input bypass capacitance close to the supply pins, and provide an uninterrupted ground path. Because the package is only 7 x 7 mm, verify assembly-pad geometry, solder-mask clearance, and programming-test access against the manufacturer package drawing rather than scaling a generic TQFP footprint.
Calculate the complete power budget across active, idle, and sleep modes. The MCU can sleep at down to a few hundred nanoamperes, but the LCD load, analog circuitry, voltage regulator, pull resistors, and external sensors can dominate the final system current. Use the datasheet operating-current and LCD-current conditions that match the intended supply voltage, and keep wake-up paths disabled when their function is not required.
Give the LCD charge-pump and bias network a short, quiet implementation path, and route LCD segment and common outputs away from sensitive analog inputs. Avoid placing high-current switching sources or inductors near the MCU, ADC inputs, oscillator components, and LCD bias nodes. Confirm the glass segment mapping and common count in firmware because an incorrect mapping can create ghost segments even when the electrical layout is correct.
Do not substitute a -E temperature variant into a design that must operate at -40°C without reviewing its complete temperature limits. Likewise, verify the meaning of ordering-code suffixes before treating T and non-T variants as interchangeable. After substitution, recheck pin functions, LCD mapping, firmware compatibility, operating voltage, oscillator behavior, and qualification requirements; package equality alone does not prove complete functional equivalence.
合規資訊
The manufacturer product information identifies an industrial-temperature PIC24F MCU, but explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations were not present in the cited product details.