PIC24FV16KM104-I/PT - 16-Bit 32MHz 16KB Flash MCU | Microchip
MPN： PIC24FV16KM104-I/PT ✓ 啟用中PIC24FV16KM104-I/PT 概覽
A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and input/output functions into one device. The PIC24FV family belongs to the PIC24F microcontrollers, combining a 16-bit architecture with nanoWatt eXtreme low-power features. This device is particularly useful when a design requires more computational capability and analog integration than a small 8-bit controller, while retaining a low-pin-count package for compact embedded systems.
The verified product information identifies a 32 MHz maximum operating speed, 16 KB Flash memory organized as 5.5K by 24, 1 KB RAM, a 12-bit ADC, and an 8-bit DAC. The PIC24FV family also includes operational amplifiers and a Configurable Logic Cell. These peripherals allow a designer to connect sensors, perform local signal conditioning, generate analog outputs, and implement timing or control functions without relying on separate analog and logic devices.
The PIC24FV16KM104-I/PT is suited to industrial control, sensor monitoring, embedded measurement, motor-control assistance, and low-power embedded products. Its 2.0 V to 5.5 V operating range supports both 3 V and 5 V systems, while the 44-pin TQFP package exposes the family’s mixed-signal and digital peripherals. The PIC24F KM family is positioned for applications from 1.8 V to 5.5 V operation according to the manufacturer product-page result.
Designers should confirm the exact pin functions, peripheral assignments, decoupling requirements, and programming configuration from the manufacturer datasheet before committing the footprint. The -I suffix identifies the industrial temperature-grade ordering option, while /PT denotes the 44-pin TQFP package format. The manufacturer’s product family information is the authoritative reference for electrical limits and peripheral behavior.
This product page combines the verified PIC24FV16KM104-I/PT identity, package and memory information with practical selection guidance. It also separates same-package alternatives from parts that are only functionally similar and helps engineers confirm tool, pinout and sourcing requirements before design-in.
直接替換替代品，適用於 PIC24FV16KM104-I/PT — 相同封裝，腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號： PIC24FV16KM104-I/PT （相同外形與佔位） — 差異在於 Package, ADC, Configurable Logic Cell, Pin Count, Program Memory (Flash).
PIC24FV16KM104-I/PT
✅ 直接替換聯絡詢價
查看資料表 →PIC24F16KM104-I/PT
✅ 直接替換聯絡詢價
查看資料表 →PIC24FV16KM104-I/PT 最大額定值與電氣特性
| Microcontroller Family | PIC24FV |
| Architecture | 16-bit |
| Maximum CPU Frequency | 32 MHz |
| Program Memory | 16 KB Flash (5.5K x 24) |
| Data Memory | 1 KB RAM |
| ADC Resolution | 12-bit |
| DAC Resolution | 8-bit |
| Operational Amplifiers | Integrated |
| Configurable Logic Cell | 1 cell |
| Capture/Compare/PWM Modules | Flexible peripheral configuration |
| Operating Voltage Range | 2.0 V to 5.5 V |
| 封裝 | 44-pin TQFP (10 x 10 mm) |
| 安裝類型 | Surface mount |
| Low-Power Feature | nanoWatt eXtreme low power |
| Temperature Grade | Industrial grade (-I suffix) |
| 腳位數 | 44 pins |
PIC24FV16KM104-I/PT 44-pin tqfp (10 x 10 mm) 腳位配置指南
PIC24FV16KM104-I/PT（44-pin tqfp (10 x 10 mm) 封裝）的腳位配置。 此數位 IC 包含 GPIO、通訊介面（UART、SPI、I2C）與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料： PIC24FV16KM104-I/PT.
請參閱 資料表 以查看完整腳位配置。
典型應用
PIC24FV16KM104-I/PT 適用於 6 應用s: Industrial Sensor Acquisition, Low-Power Environmental Monitor, Process Control Controller, Compact Motor and Actuator Control, Battery-Powered Portable Instrument, LED Lighting and Visual Control.
Industrial Sensor Acquisition
The PIC24FV16KM104-I/PT fits industrial sensor nodes because it combines a 32 MHz 16-bit core with a 12-bit ADC and integrated operational amplifiers in a 44-pin TQFP package. The microcontroller can digitize sensor outputs, perform local filtering or control calculations, and retain a compact mixed-signal implementation. Its 2.0 V to 5.5 V PIC24FV operating range accommodates 3 V and 5 V designs, while the PIC24F KM family’s nanoWatt eXtreme low-power positioning supports duty-cycled measurements. Designers should use the manufacturer pin-description table to assign analog inputs and the recommended decoupling network close to the device.
推薦
Low-Power Environmental Monitor
PIC24FV16KM104-I/PT is appropriate for a battery-conscious environmental monitor that periodically samples sensors and then returns to a low-power state. The 16-bit architecture and 32 MHz operating speed provide useful processing headroom for filtering, threshold logic, and data formatting, while the 16 KB Flash and 1 KB RAM support compact firmware. The 12-bit ADC reduces the need for external conversion circuitry, and the 2.0 V to 5.5 V range allows common low-voltage supply designs. Wake-up behavior, active current, and sleep current must be selected from the manufacturer’s power-management documentation.
推薦
Process Control Controller
The PIC24FV16KM104-I/PT can serve as the local controller in a small process-control subsystem, using its 12-bit ADC to acquire process variables, its 8-bit DAC to command an analog setpoint, and its operational amplifiers for signal conditioning. The 16-bit core handles control logic more effectively than a basic 8-bit MCU, and flexible Capture/Compare/PWM modules support timing-sensitive functions. The 44-pin TQFP package exposes a practical mix of analog and digital resources. Loop timing, DAC settling, ADC acquisition, and fault-response behavior should be validated in hardware before deployment.
推薦
Compact Motor and Actuator Control
PIC24FV16KM104-I/PT is well suited to compact actuator-control designs requiring a combination of deterministic digital timing and local analog measurement. Its flexible Capture/Compare/PWM modules can generate timed drive or capture events, while the 12-bit ADC monitors current, position, or temperature signals. The 16 KB Flash and 1 KB RAM are suitable for a focused controller rather than a large real-time operating system. Use the manufacturer peripheral-mapping tables to configure outputs and verify that the selected 44-pin TQFP exposes every required signal.
推薦
Battery-Powered Portable Instrument
The PIC24FV16KM104-I/PT supports portable, battery-powered instruments where a 16-bit controller, mixed-signal conversion, and low-power operation must coexist in a compact design. Its 12-bit ADC can acquire transducer signals, the 8-bit DAC can generate excitation or reference waveforms, and the operational amplifiers can condition the analog path. The 2.0 V to 5.5 V family range supports multiple battery platforms, although a regulator may be required for a stable rail. Select low-power modes and peripheral clocks carefully to balance measurement accuracy with battery life.
推薦
LED Lighting and Visual Control
PIC24FV16KM104-I/PT can control LED-based visual indicators or simple lighting systems where timing, current monitoring, and configurable logic are useful. The flexible Capture/Compare/PWM modules support precise pulse-width control, and the 12-bit ADC can monitor a current-sense or supply signal. A 16-bit CPU at 32 MHz leaves room for animation, status handling, and communication routines beyond simple on/off control. The integrated analog resources also permit sensor-responsive lighting without adding a separate ADC. Validate PWM resolution and external transistor drive requirements in the final board layout.
推薦
推薦產品摘要
工程參考資料，適用於 PIC24FV16KM104-I/PT — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | PIC24FV16KM104-I/PT | PIC24F16KM104-I/PT |
|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 44-pin TQFP (10 x 10 mm) | 44-pin TQFP (10 x 10 mm) | 44-pin TQFP (10 x 10 mm) |
| CPU Architecture | 16-bit | 16-bit | 16-bit |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 16 KB (5.5K x 24) | 16 KB (5.5K x 24) | 16 KB (5.5K x 24) |
| RAM | 1 KB | 1 KB | 1 KB |
主要差異化特點
- Mixed-signal integration (對比PIC24F16KM104-I/PT)
- 16-bit processing performance (對比PIC24F16KM104-I/PT)
- Compact 44-pin mixed-signal package (對比PIC24F16KM104-I/PT)
設計說明
Confirm the exact device operating-voltage limits and use a regulator that maintains the supply within the manufacturer’s specified range. Place the required decoupling capacitors close to the corresponding VDD and VSS pins, following the values and layout shown in the PIC24F KM datasheet. Because the PIC24FV family supports 2.0 V to 5.5 V operation, validate brownout, startup, and ADC-reference behavior at the lowest intended rail.
Assign analog and digital nets from the manufacturer pin-description table rather than assuming a generic TQFP-44 layout. Keep analog inputs short, provide a quiet return path, and separate sensitive analog traces from PWM and switching-node routing. The integrated ADC, DAC, and operational amplifiers make careful grounding and decoupling important even though no separate analog IC is required.
Do not substitute PIC24F16KM104-I/PT for PIC24FV16KM104-I/PT solely because the names and 44-pin packages are similar. The family designation affects the verified analog feature set, and peripheral mapping or pin availability may differ. Check the exact ordering-code table, pin-description table, and device support files before treating either part as a replacement or using the same programmed firmware image.
Treat analog acquisition as a signal-integrity design, not only as an ADC connection. Use the shortest practical route from the sensor or conditioning network, maintain a continuous ground reference under the analog section, and keep switching outputs and PWM edges away from sensitive nodes. Verify acquisition time, source impedance, reference stability, and DAC output loading with realistic stimulus conditions.
合規資訊
The -I suffix denotes the industrial ordering grade. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer product documentation or declaration.