SI2535-F-FSR - 16-SOIC ISOmodem | Skyworks Solutions (Tape & Reel)
MPN: SI2535-F-FSR ✓ 啟用中SI2535-F-FSR 概覽
A modem interface IC forms the boundary between a host processor and a communications channel. In this role, the device handles line-oriented signaling and modem-related functions while the surrounding processor manages higher-level data exchange and protocol processing. The SI2535-F-FSR combines line-side processor functionality with an integrated system-side fax ISOmodem, allowing a fax-oriented communications path to be added to a telephone interface design without requiring every modem function to be implemented in system firmware.
The SI2535-F-FSR uses a 16-pin SOIC package, a surface-mount format compatible with conventional board assembly and automated production processes. Its exact pin assignments, electrical limits, clock requirements, line-interface parameters, operating-temperature range, and power-consumption figures must be confirmed against the manufacturer datasheet before schematic release or PCB layout approval. Particular attention should be given to analog line-side connections, grounding, external component requirements, and any clock or interface dependencies shown in the application schematic.
Potential uses include multifunction fax equipment, fax-modem cards, embedded telephone systems, industrial data-communications equipment, and legacy communications controllers that rely on a dedicated ISOmodem function. A system architect should compare these requirements with the manufacturer’s supported operating modes, line standard, and processor interface before selecting the part. The device is also relevant to repair and modernization programs where an existing board uses the same 16-SOIC footprint and requires an exact pin-compatible substitute.
Design work should begin with the manufacturer pin-description table and reference application circuit. Confirm whether the selected PCB uses a leaded 16-SOIC footprint, validate every signal direction and supply requirement, and reproduce the prescribed external network and decoupling components. Since SI2535-F-FSR is a specialized telecom interface device, careful signal-integrity and line-isolation review is more valuable than generic IC layout guidance.
This product record combines the verified device identity, package form, modem-interface classification, distributor listings, and drop-in replacement analysis. It also highlights the engineering details that should be checked against the manufacturer datasheet before schematic release, including the complete pinout, electrical ratings, application support, and compatibility of any proposed replacement.
直接替換替代品,適用於 SI2535-F-FSR — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此產品無可直接替換的替代品。
申請替代品SI2535-F-FSR 規格
| Device Type | Modem interface IC |
| Product Function | Line-side processor with integrated system-side fax ISOmodem |
| Product Category | Telecom interface ICs |
| 封裝 | 16-pin SOIC |
| 安裝類型 | Surface mount |
| 腳位數 | 16 pins |
| Factory Programming | -FS suffix |
| Line-Side Interface | Line-side processor |
| System-Side Function | Integrated system-side fax ISOmodem |
SI2535-F-FSR 16-pin soic 腳位配置指南
SI2535-F-FSR(16-pin soic 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: SI2535-F-FSR.
請參閱 資料表 以查看完整腳位配置。
典型應用
SI2535-F-FSR 適用於 6 應用s: Fax-Modem Terminal Equipment, Industrial Telephone Data Gateway, Multifunction Fax Controller, Legacy Fax Communication Card, Embedded Telephone Interface, Communications Controller Repair.
Fax-Modem Terminal Equipment
The SI2535-F-FSR fits fax-modem terminal equipment because its integrated system-side fax ISOmodem provides a dedicated hardware path for fax signaling alongside the line-side processor function. The 16-pin SOIC package allows the modem circuitry to fit into a conventional surface-mount board without requiring a large module. The designer should reproduce the manufacturer’s line-side network and application circuit, then verify clocking, host communication, and supported fax modes against the datasheet before production.
Industrial Telephone Data Gateway
An industrial telephone data gateway can use the SI2535-F-FSR when the product must combine line-side processing with a system-side fax ISOmodem. The dedicated modem function can offload specialized channel handling from the embedded host processor while preserving a compact 16-pin SOIC footprint. For industrial deployment, verify the device’s operating-temperature range, isolation strategy, surge protection, grounding, and regulatory constraints in addition to its line-interface requirements.
Multifunction Fax Controller
The SI2535-F-FSR is applicable to multifunction fax controllers because the system-side fax ISOmodem is integrated into the same device as the line-side processor. This consolidation can simplify the allocation of modem functions across a controller board while keeping the device count moderate. A successful implementation depends on implementing the manufacturer’s host interface and external component network exactly and confirming that the required operating mode is supported.
Legacy Fax Communication Card
A legacy fax communication card is a natural fit when an existing system retains a dedicated fax path through the SI2535-F-FSR. The 16-pin SOIC package makes the component straightforward to compare with an installed board during repair or upgrade work. Technicians should confirm the exact ordering code, pin orientation, external component values, clock source, and line-side connections before substitution, because a shared modem category alone does not establish interchangeability.
Embedded Telephone Interface
The SI2535-F-FSR can support embedded telephone-interface designs that require dedicated modem processing in addition to a system-side fax function. Placing this interface IC beside a host processor lets the host control higher-level behavior while the modem device manages the line-oriented signaling path. The board must follow the recommended telephone-network interface, provide appropriate protection, and maintain controlled return paths between the analog line circuitry and digital systems.
Communications Controller Repair
The SI2535-F-FSR can be used in targeted repair work on communications controllers that originally incorporated this modem interface. Exact ordering-code verification is essential because the 16-pin SOIC outline alone cannot confirm pin compatibility, clocking, or modem behavior. Inspect the installed device markings, compare the board’s external circuitry with the manufacturer application diagram, and request the component with the appropriate date-code and inspection requirements through the quote form.
工程參考資料,適用於 SI2535-F-FSR — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 |
|---|---|
| Brand | Skyworks Solutions |
| Package | 16-pin SOIC |
| Device Type | Modem interface IC |
| Primary Function | Line-side processor |
| System-Side Function | Integrated system-side fax ISOmodem |
| Product Category | Telecom interface ICs |
| Mounting Type | Surface mount |
| Pin Count | 16 pins |
| Lifecycle Status | Active |
| Drop-In Alternative Found | No verified alternative |
設計說明
Use the manufacturer’s 16-pin SOIC footprint and place the device according to the pin-1 orientation shown in the datasheet package drawing. Keep the modem’s line-side and digital-interface sections arranged consistently with the reference application circuit; do not infer analog or digital net assignments from the catalog package name. Confirm land pattern, paste stencil, pad dimensions, and assembly tolerances against the latest package drawing before releasing artwork.
Treat the line-side network as a sensitive analog interface and reproduce the manufacturer-recommended external components, isolation boundaries, and grounding arrangement. The line-side processor function can be affected by board leakage, long high-impedance routes, or unsuitable return paths even when the digital host interface operates correctly. Compare the PCB layout with the manufacturer reference design and verify the complete telephone-network interface before production testing.
Do not substitute the SI2535-F-FSR solely because another device also uses a 16-pin SOIC package. Verify every pin name, supply level, clock requirement, timing parameter, and modem mode from the manufacturer datasheet. The “-FS” ordering suffix should also be checked against the system configuration. An apparently similar modem may require a different pinout or line interface and therefore may not be a true drop-in replacement.
Follow the manufacturer’s recommended supply and decoupling arrangement without substituting generic values. Place bypass components at the appropriate supply pins and keep sensitive modem nodes away from noisy switching and high-current return paths. Validate supply startup, clock stability, ground bounce, and analog performance on a prototype using the applicable line-side operating conditions before releasing the design to manufacturing.
合規資訊
Compliance declarations are not identified in the available product summaries. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-minerals status with the manufacturer before procurement or environmental reporting.