STM32F071V8T6 - 48MHz Cortex-M0 MCU | STMicroelectronics
MPN： STM32F071V8T6 ✓ 啟用中STM32F071V8T6 概覽
A microcontroller is a programmable semiconductor that executes firmware, reads sensor inputs, controls digital outputs, and manages system communication. The STM32F0 family belongs to the hierarchy of embedded microcontroller, 32-bit RISC processor, Arm Cortex-M microcontroller, and embedded semiconductor. The Cortex-M0 architecture is intended for compact control systems where deterministic execution, low complexity, and broad peripheral integration are more important than high-end processor performance.
The STM32F071V8T6 provides a 48 MHz Cortex-M0 core, 64 KB of Flash memory, and 16 KB of SRAM with hardware parity according to the indexed device data. Its 100-LQFP package exposes 100 connections in a 14 x 14 mm footprint, making it suitable for densely populated embedded control boards. The specified 2.0 V to 3.6 V operating supply supports common 3.3 V industrial, consumer, and instrumentation designs.
The 16 KB SRAM provides working memory for firmware execution, while the 64 KB Flash stores application code and configuration data. The Cortex-M0 core operates at up to 48 MHz, matching the frequency identified by STMicroelectronics, DigiKey, Mouser, and the indexed datasheet. A dedicated CRC calculation unit, reset and power-management functions, and integrated communication capabilities support reliable data handling and peripheral integration.
Typical applications include compact industrial controllers, sensor-hub boards, consumer accessories, communication modules, and low-cost embedded instruments. The 100-LQFP package offers substantially more I/O than smaller microcontroller packages, allowing designers to connect displays, sensors, communication transceivers, and discrete control signals without relying on external I/O expanders.
When designing a PCB, reserve adequate exposed copper and routing clearance for the 100-pin LQFP footprint, follow the manufacturer pin and land-pattern guidance, and place decoupling capacitors close to the supply pins. Validate all peripheral multiplexing, boot behavior, clock configuration, and firmware dependencies before using a related STM32F0 device as a substitute.
This page consolidates the verified manufacturer and distributor details, compares potentially relevant same-footprint devices, and identifies purchasing, pinout, replacement, and design considerations that are not presented as one unified document in the source listings.
直接替換替代品，適用於 STM32F071V8T6 — 相同封裝，腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號： STM32F071V8T6 （相同外形與佔位） — 差異在於 Package, Flash Memory, Product Type, SRAM, Architecture.
STM32F071V8H6
✅ 直接替換📋 參考替代品（不在目錄中）
STM32F072VBT6TR
✅ 直接替換聯絡詢價
查看資料表 →STM32F072VBH6
✅ 直接替換聯絡詢價
查看資料表 →STM32F072VBT6TR
✅ 直接替換聯絡詢價
查看資料表 →STM32F101V8T6
✅ 直接替換📋 參考替代品（不在目錄中）
STM32F071V8T6 最大額定值與電氣特性
| Product Type | 32-bit ARM Cortex-M0 microcontroller |
| Maximum CPU Frequency | 48 MHz |
| Flash Memory | 64 KB (64K x 8) |
| SRAM | 16 KB with hardware parity |
| CPU Architecture | Arm Cortex-M0 32-bit RISC |
| Digital and I/O Supply Voltage | 2.0 V to 3.6 V |
| 封裝 | 100-LQFP (14 x 14 mm) |
| 安裝類型 | Surface mount |
| 腳位數 | 100 pins |
| CRC Calculation Unit | Yes |
| Reset and Power Management | Integrated |
STM32F071V8T6 100-lqfp (14 x 14 mm) 腳位配置指南
STM32F071V8T6（100-lqfp (14 x 14 mm) 封裝）的腳位配置。 此數位 IC 包含 GPIO、通訊介面（UART、SPI、I2C）與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料： STM32F071V8T6.
請參閱 資料表 以查看完整腳位配置。
典型應用
STM32F071V8T6 適用於 6 應用s: Industrial Control and Automation, Sensor Hub and Environmental Monitoring, Communication and Protocol Interface, Consumer Accessory Controller, LED Lighting and Display Control, Instrumentation and Measurement Front End.
Industrial Control and Automation
The STM32F071V8T6 fits compact machine-control boards that combine digital inputs, outputs, sensors, and local communication. Its 48 MHz Arm Cortex-M0 core provides deterministic embedded processing, while 64 KB of Flash supports application firmware and 16 KB of SRAM provides working memory. The 100-LQFP package offers 100 connections for isolators, drivers, transducers, and status interfaces. Engineers should verify the complete operating-temperature rating, watchdog behavior, and peripheral assignments in the manufacturer documentation before using it in a safety-related or high-availability industrial controller.
推薦
Sensor Hub and Environmental Monitoring
The STM32F071V8T6 is appropriate for a multi-sensor node that samples digital or analog sensing channels and forwards results over a serial interface. The 64 KB Flash can retain calibration tables and application code, and the 16 KB SRAM supports protocol buffers and acquisition logic. Its 48 MHz Cortex-M0 core allows responsive peripheral servicing without a higher-cost application processor. The 100-LQFP package simplifies direct connection of multiple sensors and digital isolators, although analog-channel specifications and the exact GPIO alternate functions require verification from the full datasheet.
推薦
Communication and Protocol Interface
The STM32F071V8T6 can serve as the host controller for an embedded communication module that needs deterministic firmware execution and several peripheral connections. Its 48 MHz Cortex-M0 core and 64 KB of Flash are suitable for protocol stacks, local configuration, and device management. The 100-LQFP package provides ample connections for a transceiver, indicators, controls, and isolation devices. Design validation should compare the exact USART, SPI, I2C, and timer resources of each candidate because the verified data confirms integrated communications but does not enumerate every peripheral instance.
推薦
Consumer Accessory Controller
The STM32F071V8T6 can manage buttons, indicators, relays, sensors, and a serial accessory interface in a compact consumer product. Its 2.0 V to 3.6 V digital and I/O supply supports 3.3 V logic, while the 64 KB Flash and 16 KB SRAM are sized for embedded control rather than a rich graphical user interface. The 100-LQFP footprint provides more I/O than small-outline alternatives but requires adequate PCB area and careful escape routing. Firmware development must include boot, reset, brownout, and peripheral initialization appropriate to the selected STM32F0 device.
推薦
LED Lighting and Display Control
The STM32F071V8T6 is usable in LED signage, status displays, and general lighting-control modules where multiple outputs must be updated in real time. Its 48 MHz Cortex-M0 core supports timer-based dimming, key scanning, and communication updates, while the 100-LQFP package offers enough pins to distribute several control signals. The 64 KB Flash stores animation or configuration data and the 16 KB SRAM supports display buffers. Exact timer channels, PWM resolution, and GPIO drive capabilities must be confirmed from the manufacturer datasheet because those values were not included in the supplied verification.
推薦
Instrumentation and Measurement Front End
The STM32F071V8T6 suits measurement instruments that need control logic, calibration storage, communications, and several digital I/O connections in a single device. Its 64 KB Flash can hold firmware and calibration information, while 16 KB of SRAM supports acquisition and conversion control. At 48 MHz, the Cortex-M0 core handles protocol tasks and front-panel updates without requiring an external processor. Designers should verify ADC characteristics, timer accuracy, reference voltage, and operating-temperature limits from the complete datasheet before establishing measurement accuracy for this 100-LQFP implementation.
推薦
推薦產品摘要
工程參考資料，適用於 STM32F071V8T6 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | STM32F071V8H6 | STM32F072VBT6TR | STM32F072VBH6 | STM32F101V8T6 |
|---|---|---|---|---|---|
| Package | 100-LQFP (14 x 14 mm) | 100-LQFP (14 x 14 mm) | 100-LQFP (14 x 14 mm) | 100-LQFP (14 x 14 mm) | 100-LQFP (14 x 14 mm) |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| CPU Core | Arm Cortex-M0 | Arm Cortex-M0 | Arm Cortex-M0 | Arm Cortex-M0 | Arm Cortex-M3 |
| Maximum CPU Frequency | 48 MHz | 48 MHz | 48 MHz | 48 MHz | 72 MHz |
主要差異化特點
- Exact 48 MHz Cortex-M0 operating class (對比STM32F101V8T6)
- Verified 64 KB Flash configuration (對比STM32F072VBT6TR)
- Documented 16 KB SRAM with hardware parity (對比STM32F101V8T6)
設計說明
Use the current STMicroelectronics 100-LQFP recommended land pattern and pin-1 orientation rather than scaling a generic 100-pin footprint. Preserve solder-mask and paste geometry specified for the exact package. Because the supplied evidence does not include the complete pin table or recommended PCB artwork, engineers should verify pin numbering, exposed thermal considerations, and assembly tolerances in the official package documentation before fabrication.
The verified digital and I/O supply range is 2.0 V to 3.6 V. Place the required local bypass capacitors close to their associated supply pins, with short ground-return paths, and confirm that every connected peripheral uses voltage levels compatible with the selected supply domain. Do not infer analog or external-supply limits from the digital range; verify those separately in the manufacturer datasheet before connecting sensors or transceivers.
Do not treat a matching package, CPU frequency, and Flash density as sufficient proof of drop-in equivalence. Review alternate-function assignments, timer channels, communication instances, pin mapping, clock topology, startup behavior, and firmware dependencies. This is especially important when moving from STM32F071V8T6 to STM32F072 or STM32F101 devices, where the processor core or memory organization can change software behavior even when the board outline remains similar.
合規資訊
The supplied verified product and distributor snippets do not contain explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations. No compliance status has been assumed.