STM32F767NGH6 - 216MHz Cortex-M7 MCU | STMicroelectronics
MPN： STM32F767NGH6 ✓ 啟用中STM32F767NGH6 概覽
The STM32F7 series is a microcontroller family within the broader embedded processor and semiconductor hierarchy. Its ARM Cortex-M7 core is designed for high-performance control applications, combining a 32-bit architecture with floating-point and DSP-oriented processing. The STM32F767NGH6 provides 216 MHz operation, 1 MB of flash memory, and 512 KB of RAM according to the retrieved product information. Its package and peripheral resource density make it suitable for industrial control, communications, audio, and embedded systems requiring more performance than a basic microcontroller.
Key specifications include a 216 MHz maximum CPU frequency, 1 MB of flash memory, and 512 KB of RAM. The device supports operation from 1.8 V, 2.5 V, and 3.3 V supply arrangements, with a reported supply-voltage range of 1.7 V to 3.6 V in comparison data. The 216-TFBGA package provides a compact surface-mount footprint for high-density designs, while the 13 x 13 mm body enables placement alongside other fine-pitch components.
The STM32F767NGH6 combines an ARM Cortex-M7 processor with extensive on-chip resources for connected and control-oriented products. Its high clock speed supports responsive task scheduling, communication protocol handling, signal processing, and control-loop execution. The large flash and RAM resources allow more application code and data to be retained locally, reducing dependence on external memory in many designs.
Typical applications include industrial automation and factory control, industrial networking gateways, audio and digital signal processing equipment, medical monitoring instruments, and embedded communications platforms. These applications benefit from the combination of 216 MHz processing speed, 1 MB flash memory, 512 KB RAM, and a high-pin-count package with extensive peripheral connectivity.
Design considerations should focus on power-supply integrity, decoupling, thermal performance, and fine-pitch BGA assembly. The 1.7 V to 3.6 V operating range requires careful rail sequencing and voltage supervision, particularly when external memory or communication interfaces are used. Differential and high-speed signals should be routed with controlled return paths, while the exposed thermal and power-distribution network should be designed according to STMicroelectronics layout and assembly guidance.
This product data combines verified manufacturer and distributor information with practical engineering guidance, package considerations, pricing context, and a strict drop-in comparison framework. It is intended to help engineers evaluate the STM32F767NGH6 for high-performance embedded designs while separating confirmed specifications from parameters that still require verification from the manufacturer datasheet.
直接替換替代品，適用於 STM32F767NGH6 — 相同封裝，腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號： STM32F767NGH6 （相同外形與佔位） — 差異在於 Package, CPU Architecture, Flash Memory, Operating Temperature Range, Product Type.
STM32F767NIH6
✅ 直接替換 ⚠️ 規格未經驗證✗ 缺貨
$10.85 / 單位
查看資料表 →STM32F767NIH7
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →STM32F767NGH6 最大額定值與電氣特性
| Product Type | 32-bit ARM Cortex-M7 microcontroller |
| Product Series | STM32F7 series |
| Maximum CPU Frequency | 216 MHz |
| CPU Architecture | 32-bit ARM Cortex-M7 |
| Flash Memory | 1 MB (1M x 8) |
| RAM Memory | 512 KB |
| Operating Supply Voltage Range | 1.7 V to 3.6 V |
| Supported Supply Levels | 1.8 V, 2.5 V, and 3.3 V |
| 封裝 | 216-TFBGA (13 x 13 mm) |
| 安裝類型 | Surface mount |
| 工作溫度範圍 | -40 °C to +85 °C |
| Core Features | FPU and DSP instruction support |
| Ethernet Support | Ethernet MAC |
| Timer and PWM Resources | ADC, timer, and PWM resources listed in product descriptions |
STM32F767NGH6 216-tfbga (13 x 13 mm) 腳位配置指南
STM32F767NGH6（216-tfbga (13 x 13 mm) 封裝）的腳位配置。 此數位 IC 包含 GPIO、通訊介面（UART、SPI、I2C）與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料： STM32F767NGH6.
請參閱 資料表 以查看完整腳位配置。
典型應用
STM32F767NGH6 適用於 6 應用s: Industrial Automation Controllers, Industrial Networking Gateways, Audio and Digital Signal Processing, Medical Monitoring Instruments, Embedded Communications Equipment, Precision Timer and PWM Control.
Industrial Automation Controllers
The STM32F767NGH6 fits industrial automation controllers that combine real-time control with network communications and data logging. Its 216 MHz Cortex-M7 core provides substantial processing headroom for motion tasks, communication stacks, and supervisory logic, while 1 MB of Flash and 512 KB of RAM allow substantial firmware and working data to remain local. The 216-TFBGA package supports compact controller designs with many external interfaces. Designers should preserve the device's 1.7 V to 3.6 V operating range through validated power rails, provide local decoupling, and verify pin multiplexing against the manufacturer datasheet before releasing the PCB.
推薦
Industrial Networking Gateways
The STM32F767NGH6 is appropriate for protocol-conversion and industrial-networking gateways that must process several real-time interfaces while maintaining predictable response. Its 216 MHz CPU frequency supports demanding protocol handling, and the 1 MB Flash plus 512 KB RAM combination reduces pressure on external memory. The STM32F7 Ethernet capability can simplify the system architecture when an appropriate PHY and magnetics are added. Layout work must preserve high-speed differential signal integrity, provide isolated copper for Ethernet connections where required, and keep switching supplies away from sensitive communication nodes.
推薦
Audio and Digital Signal Processing
The STM32F767NGH6 suits audio controllers and real-time signal-processing equipment because its ARM Cortex-M7 core supports FPU and DSP-oriented operations at up to 216 MHz. The available 512 KB of RAM is useful for buffering samples or intermediate results, while 1 MB of Flash accommodates control software and fixed coefficients. The device can coordinate audio conversion, filtering, and transport functions without relying on a separate high-performance processor. Designers should isolate converter clocks from digital return currents and verify the manufacturer timing, pin-multiplex, and decoupling requirements before production.
推薦
Medical Monitoring Instruments
The STM32F767NGH6 can serve as the control processor in diagnostic and patient-monitoring equipment where acquisition, filtering, and user-interface logic must operate predictably. Its 216 MHz Cortex-M7 performance handles real-time sampling workflows, the 512 KB RAM supports local buffering, and the 1 MB Flash accommodates firmware and reference data. The compact 216-TFBGA package is useful in multi-board instruments, but medical use requires application-specific validation. Supply sequencing, analog isolation, low-noise grounding, and complete operating-temperature assessment must be completed before clinical deployment.
推薦
Embedded Communications Equipment
The STM32F767NGH6 fits embedded communications equipment that needs responsive protocol processing, local configuration storage, and multiple serial interfaces. Its 216 MHz core allows the firmware to combine framing, routing, diagnostics, and user-interface tasks, while 1 MB of Flash and 512 KB of RAM support more capable embedded networking stacks. The 216-TFBGA footprint provides dense pin access for communications-oriented designs. Engineers should keep clock and data traces impedance-controlled, allocate solid ground planes, and validate RF or high-speed interfaces with the manufacturer's recommended reference layout.
推薦
Precision Timer and PWM Control
The STM32F767NGH6 is suitable for timer-driven control systems requiring fast deterministic execution alongside complex supervisory logic. Its 216 MHz Cortex-M7 performance can execute tight control loops while reserving capacity for communications, diagnostics, and data logging, and the 1 MB Flash plus 512 KB RAM provides room for larger application programs. The 216-TFBGA package exposes the extensive peripheral assignment required by mixed control systems. Designers should confirm timer channels, complementary outputs, pin routing, and clock-tree settings from the manufacturer datasheet, then verify timing behavior with an oscilloscope under worst-case load conditions.
推薦
推薦產品摘要
工程參考資料，適用於 STM32F767NGH6 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | STM32F767NIH6 | STM32F767NIH7 |
|---|---|---|---|
| Package | 216-TFBGA (13 x 13 mm) | 216-TFBGA | 216-TFBGA |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Maximum CPU Frequency | 216 MHz | 216 MHz | 216 MHz |
| CPU Core | Arm Cortex-M7 | Arm Cortex-M7 | Arm Cortex-M7 |
| Flash Memory | 1 MB | 2 MB | 2 MB |
主要差異化特點
- Lower flash configuration for designs with sufficient code storage (對比STM32F767NIH6)
- Verified 216 MHz Cortex-M7 performance (對比STM32F767NIH7)
- Large local RAM for embedded buffering (對比STM32F767NIH6)
設計說明
Design the STM32F767NGH6 power tree around its verified 1.7 V to 3.6 V operating range. Place the manufacturer's recommended bulk and high-frequency decoupling capacitors directly at the relevant supply balls, minimize loop area, and assign continuous supply and ground planes rather than fragmented copper. Validate startup sequencing, minimum on-time requirements, and power-source impedance against the family datasheet before schematic release.
The 216-TFBGA package concentrates power delivery and thermal-management requirements into a fine-pitch, high-pin-count footprint. Provide uninterrupted copper beneath and around the device where the package drawing permits, use thermal vias according to manufacturer guidance, and calculate junction temperature using the actual PCB thermal resistance. Do not rely on the package alone when nearby converters or processors create a local hot spot.
Do not release the STM32F767NGH6 PCB until all 216 ball assignments have been checked against the manufacturer package drawing and pinout. Confirm every alternate-function, debug, clock, and power pin, including exposed or reserved balls. Because the supplied snippets do not expose the complete ball map, PCB designers must download the manufacturer datasheet and verify pad, mask, paste, and solderable-ball definitions rather than relying on a distributor pinout thumbnail.
Keep high-speed clocks, Ethernet differential pairs, and memory-related interfaces over continuous reference planes with short return paths. Avoid routing sensitive signals beneath switching-converter loops or across split power-plane boundaries. Match interface impedance to the manufacturer reference design and preserve the documented spacing around the 216-TFBGA perimeter so assembly and inspection remain reliable.
合規資訊
The supplied verified snippets do not explicitly state RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive-qualification status. AEC-Q100 is marked not_applicable because no automotive qualification claim was provided for this industrial and commercial microcontroller.