STM32L011G4U6 - 32MHz 16KB Flash MCU | STMicroelectronics
MPN: STM32L011G4U6 ✓ 啟用中STM32L011G4U6 概覽
An ultra-low-power microcontroller is a semiconductor device designed to execute embedded control tasks while minimizing energy consumption during active operation, standby, and wake-up transitions. Within the product hierarchy, STM32L011G4U6 is an MCU, embedded microcontroller, 32-bit microcontroller, Arm Cortex-M0+ microcontroller, and STMicroelectronics STM32L0 access-line device. This positioning makes it useful for small battery-powered systems in which processing capability must be balanced against current consumption and board area.
The STM32L011G4U6 provides 16 KB of Flash, 2 KB of SRAM, and 512 bytes of EEPROM according to the STM32L011x3/4 datasheet preview. Its 32 MHz Arm Cortex-M0+ core supports efficient control-loop execution, while the integrated ADC enables analog-sensor acquisition without requiring a separate converter. The 28-pin UFQFPN format keeps the component suitable for compact industrial, consumer, and connected-sensor products.
The STM32L011x3/4 family is positioned for low-cost, low-power embedded designs that require reliable peripheral integration and a compact footprint. Programmable I/O supports digital sensors, controls, communication peripherals, and status indicators. The combination of 16 KB Flash and 2 KB SRAM is appropriate for compact firmware containing control routines, communication handlers, calibration data, and moderate state management.
Typical applications include battery-powered sensor nodes, building-automation endpoints, industrial monitoring modules, compact access controls, portable measurement instruments, and low-power IoT devices. In each case, the MCU can execute acquisition and control functions while relying on its analog and digital resources to reduce the number of external components.
PCB design should preserve the pin arrangement required by the manufacturer datasheet and place bypass capacitors close to the supply pins. Firmware, clock configuration, peripheral assignments, and low-power transitions should be validated against the STM32L011x3/4 reference manual and electrical characteristics before production release.
This product page combines the manufacturer family information with practical low-power design guidance, application fit, and a clear comparison framework. It helps engineers evaluate the STM32L011G4U6 as a compact 32 MHz Cortex-M0+ control platform rather than treating it only as a generic 16 KB microcontroller.
直接替換替代品,適用於 STM32L011G4U6 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: STM32L011G4U6 (相同外形與佔位) — 差異在於 Package.
STM32L011F4U6
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
STM32L011G4U6TR
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
STM32L011G4U6 最大額定值與電氣特性
| Product Type | Ultra-low-power 32-bit microcontroller |
| Processor Core | Arm Cortex-M0+ |
| Instruction Set Width | 32 bit |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 16 KB (16K x 8) |
| SRAM | 2 KB |
| EEPROM | 512 bytes |
| ADC | Integrated analog-to-digital converter |
| Supported Supply Levels | 1.8 V, 2.5 V, and 3.3 V |
| 封裝 | 28-pin UFQFPN |
| Package Dimensions | 4 mm x 4 mm |
| 腳位數 | 28 pins |
| 安裝類型 | Surface mount |
| Product Family | STM32L0 access line |
| Core Architecture | 32-bit RISC |
| Programmable I/O | Digital input and output functions |
STM32L011G4U6 4 mm x 4 mm 腳位配置指南
STM32L011G4U6(4 mm x 4 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: STM32L011G4U6.
請參閱 資料表 以查看完整腳位配置。
典型應用
STM32L011G4U6 適用於 6 應用s: Battery-Powered Sensor Nodes, Industrial Environment Monitoring, Building Automation Endpoints, Portable Measurement Instruments, Smart Access Controls, Low-Power IoT Data Loggers.
Battery-Powered Sensor Nodes
The STM32L011G4U6 fits compact battery-powered sensor nodes because it combines a 32 MHz Arm Cortex-M0+ core with 16 KB of Flash, 2 KB of SRAM, and low-power STM32L0 positioning. The integrated ADC can acquire compatible sensor signals while programmable I/O handles thresholds, indicators, and actuator commands. A sensor interface such as a resistive divider, thermistor, or low-frequency digital transducer can be supported without a separate converter. Firmware should select the lowest practical operating state between samples, then use the MCU's low-power behavior to reduce average current. The 28-pin UFQFPN package also keeps the board footprint small for distributed monitoring equipment.
Industrial Environment Monitoring
The STM32L011G4U6 is suitable for compact industrial monitoring modules that must process limited sensor data without requiring a high-performance processor. Its 16 KB of Flash supports boot logic, filtering, thresholds, logging, and communication routines, while 2 KB of SRAM accommodates short working sets and peripheral buffers. The 1.8 V, 2.5 V, and 3.3 V supply options facilitate integration with industrial logic and regulated sensor rails. The ADC provides a direct path for analog inputs within its specified operating limits, although protection, filtering, and isolation may be required for exposed field wiring. The 4 mm by 4 mm package supports dense multi-sensor panels and small remote acquisition nodes.
Building Automation Endpoints
STM32L011G4U6 works well in building-automation endpoints that combine local sensing, actuator control, and low-power operation. A 32 MHz Cortex-M0+ core can execute periodic control loops, debounce inputs, operate local indicators, and coordinate a communication interface, while 16 KB of Flash remains appropriate for a focused firmware image. Programmable I/O can supervise relays or digital isolators, subject to the datasheet's electrical limits and board-level drive requirements. The MCU's low-power family positioning helps reduce energy use in rooms that are sparsely occupied. Designers should calculate average consumption from active duration, standby duration, and communication frequency, because CPU frequency alone does not determine battery or energy-harvester performance.
Portable Measurement Instruments
The STM32L011G4U6 can serve as the control MCU in a portable measurement instrument where low power, compact packaging, and analog acquisition are more important than maximum flash capacity. Its 2 KB SRAM can hold sampled values and instrument state, while 16 KB of Flash is suited to calibration tables, measurement routines, and a focused user interface. The integrated ADC reduces the need for a separate data-acquisition IC when the input signal remains within supported voltage and bandwidth limits. A practical design may use the GPIO pins for display controls, buttons, status LEDs, and a serial interface to a display or data logger. Error handling and recalibration should be designed into the firmware because the small memory footprint favors concise, deterministic routines.
Smart Access Controls
The STM32L011G4U6 fits compact access-control peripherals that require secure control logic, status reporting, and low idle power. Its 32 MHz Cortex-M0+ core can evaluate inputs, drive lock or indicator signals, and manage a serial peripheral while operating from a 1.8 V, 2.5 V, or 3.3 V rail. Sixteen kilobytes of Flash and 2 KB of SRAM are sufficient for focused firmware when comprehensive logging or image processing is performed elsewhere. The 28-pin UFQFPN format allows a small controller board behind a reader or lock assembly. Designers should use the manufacturer's pin and electrical tables for debounce timing, input levels, and output drive, and should consider a watchdog and brownout strategy for field reliability.
Low-Power IoT Data Loggers
STM32L011G4U6 is appropriate for low-power IoT data loggers that collect limited sensor information and transmit it intermittently. The 32 MHz core can format readings and manage communication timing, while 16 KB of Flash and 2 KB of SRAM constrain firmware to focused acquisition and buffering functions. The integrated ADC supports analog sensor channels when their source impedance and sampling requirements are compatible with the converter characteristics. Programmable I/O can operate status indicators, enable external sensors, or control a radio enable line to reduce subsystem consumption. The device's compact UFQFPN package helps minimize board area, and its low-power positioning supports designs that spend most of their time waiting for a measurement or transmission event.
工程參考資料,適用於 STM32L011G4U6 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | STM32L011F4U6 | STM32L011G4U6TR |
|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 28-pin UFQFPN, 4 mm x 4 mm | 28-pin UFQFPN, 4 mm x 4 mm | 28-pin UFQFPN, 4 mm x 4 mm |
| Processor Core | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 16 KB | 16 KB | 16 KB |
| Supply Levels | 1.8 V, 2.5 V, and 3.3 V | 1.8 V, 2.5 V, and 3.3 V | 1.8 V, 2.5 V, and 3.3 V |
| ADC | Integrated | Integrated | Integrated |
主要差異化特點
- Combines a 32 MHz Cortex-M0+ core with compact onboard memory (對比STM32L011F4U6)
- Exact 16 KB Flash configuration for the specified STM32L011G4 device (對比STM32L011F4U6)
- Low-power MCU with integrated analog conversion (對比STM32L011G4U6TR)
設計說明
Use the manufacturer UFQFPN land pattern rather than a generic QFN footprint. The package is only 4 mm by 4 mm, so confirm the exposed-pad connection, pad dimensions, solder-mask clearance, and paste volume against the package drawing. Place the input bypass capacitor close to the corresponding supply and ground pins to minimize supply-loop inductance. Confirm the thermal-pad connection required by the board stack-up and assembly process.
Select the supply operating point from the documented 1.8 V, 2.5 V, or 3.3 V options and include startup margin for the regulator and load transients. The STM32L011G4U6 is intended for low-power operation, but average consumption depends on the active duty cycle, sleep interval, ADC sampling, and enabled peripherals. Measure current across each operating state instead of estimating battery life from the 32 MHz clock rate alone.
Do not treat a package-compatible STM32L011 variant as automatically firmware-compatible. Before substituting STM32L011F4U6, compare alternate-function mappings, peripheral instances, interrupt vectors, ADC channels, clock configuration, and startup support. For a new PCB, use the exact STM32L011G4U6 pin-description table and land pattern, and perform board-level validation of power, reset, clock, debug, and exposed-pad behavior.
Keep analog-sensor traces short and separate from switching nodes and high-speed communication routes. For ADC measurements, follow the datasheet guidance on source impedance and sampling time so the internal sample-and-hold capacitor can acquire the selected range accurately. If the MCU drives sensors through an external buffer, preserve the manufacturer’s pin drive limits and avoid adding capacitance that could disturb timing or increase switching energy.
合規資訊
No definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration for the exact ordering code was exposed. Confirm the current manufacturer declaration of conformity before qualification or shipment.