STM32L422RBT6 - 80MHz Cortex-M4 128KB MCU | STMicroelectronics
MPN: STM32L422RBT6 ✓ 啟用中STM32L422RBT6 概覽
An ultra-low-power microcontroller is an embedded controller designed to balance processing capability, energy consumption, and peripheral integration. STM32L4 devices belong to the microcontroller hierarchy of embedded semiconductors, combining an Arm Cortex-M4 core, memory, communication interfaces, analog conversion functions, and low-power operating modes. This integration reduces component count and simplifies PCB design in battery-operated, connected, and industrial products.
The STM32L422RBT6 features a 32-bit Cortex-M4 core with FPU, up to 80 MHz operating frequency, and 128 KB of Flash memory. Its USB interface supports designs that require a standardized peripheral connection, while the 64-LQFP 10 x 10 mm package provides a practical option for boards assembled with conventional surface-mount production equipment. The device is positioned for applications requiring strong processing performance in an energy-conscious platform.
The Cortex-M4 architecture supports efficient exception-based control and DSP-oriented instructions, while the integrated FPU accelerates suitable floating-point workloads. The STM32L4 family emphasizes low-power operation, allowing engineers to balance processing activity, standby behavior, and peripheral operation according to the workload. Exact memory, timing, electrical, and low-power limits should be confirmed against the manufacturer datasheet before final qualification.
Typical applications include USB-connected industrial controls, compact sensor nodes, wearable and portable equipment, low-power data loggers, communication modules, and battery-powered embedded products. The combination of 128 KB Flash, an 80 MHz Cortex-M4 core, USB connectivity, and a 64-pin LQFP package makes the STM32L422RBT6 suitable for new compact control platforms as well as established STM32L4 designs.
PCB implementation should follow the datasheet pin definitions, recommended decoupling network, clock configuration, and exposed land pattern guidance. Keep power and ground connections short, place support capacitors near their associated pins, and validate USB routing, oscillator layout, and signal-integrity margins in the final board stack-up.
This page combines manufacturer specifications, sourcing data, practical design guidance, and same-family replacement analysis to support faster engineering evaluation while retaining the checks needed for production qualification.
直接替換替代品,適用於 STM32L422RBT6 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: STM32L422RBT6 (相同外形與佔位) — 差異在於 Flash Memory, Operating Temperature Range, Package, Product Type.
STM32L422RBT7
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
STM32L422RBT8
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
STM32L422RBT6 最大額定值與電氣特性
| Product Type | 32-bit ultra-low-power microcontroller |
| Processor Core | Arm Cortex-M4 with FPU |
| Instruction Set | 32-bit ARM RISC |
| Maximum CPU Frequency | 80 MHz |
| Flash Memory | 128 KB (128K x 8) |
| Operating Supply Designation | 3.3 V |
| USB Support | Yes |
| 封裝 | 64-pin LQFP, 10 mm x 10 mm |
| 安裝類型 | Surface Mount |
| Core Architecture | Arm Cortex-M4 |
| Floating-Point Unit | Yes |
| Product Series | STM32L4 |
| Device Family | STM32L422 |
| 工作溫度範圍 | -40 °C to +85 °C |
STM32L422RBT6 腳位配置
| 腳位 1 | VBAT — Backup supply input |
| 腳位 2 | PC13 — General-purpose or tamper-detection digital input/output |
| 腳位 3 | PC14-OSC32_IN — General-purpose digital input/output or 32.768 kHz oscillator input |
| 腳位 4 | PC15-OSC32_OUT — General-purpose digital input/output or 32.768 kHz oscillator output |
| 腳位 5 | PF0-OSC_IN — General-purpose digital input/output or high-speed oscillator input |
| 腳位 6 | PF1-OSC_OUT — General-purpose digital input/output or high-speed oscillator output |
| 腳位 7 | NRST — Active-low reset input |
| 腳位 8 | PC0 — General-purpose or analog input/output |
| 腳位 9 | PC1 — General-purpose or analog input/output |
| 腳位 10 | PC2 — General-purpose or analog input/output |
| 腳位 11 | PC3 — General-purpose or analog input/output |
| 腳位 12 | VSSA — Analog ground |
| 腳位 13 | VREF+ — Analog reference voltage input |
| 腳位 14 | VDDA — Analog and digital external supply input |
| 腳位 15 | PA0 — General-purpose or analog input/output |
| 腳位 16 | PA1 — General-purpose or analog input/output |
| 腳位 17 | PA2 — General-purpose or analog input/output |
| 腳位 18 | PA3 — General-purpose or analog input/output |
| 腳位 19 | PA4 — General-purpose or analog input/output |
| 腳位 20 | PA5 — General-purpose or analog input/output |
| 腳位 21 | PA6 — General-purpose or analog input/output |
| 腳位 22 | PA7 — General-purpose or analog input/output |
| 腳位 23 | PB0 — General-purpose or analog input/output |
| 腳位 24 | PB1 — General-purpose or analog input/output |
| 腳位 25 | PB2 — General-purpose or boot input/output |
| 腳位 26 | PB10 — General-purpose or alternate-function digital input/output |
| 腳位 27 | PB11 — General-purpose or alternate-function digital input/output |
| 腳位 28 | VCAP1 — Internal regulator external capacitor connection |
| 腳位 29 | VDD — Digital external supply input |
| 腳位 30 | VSS — Digital ground |
| 腳位 31 | PB12 — General-purpose or alternate-function digital input/output |
| 腳位 32 | PB13 — General-purpose or alternate-function digital input/output |
| 腳位 33 | PB14 — General-purpose or alternate-function digital input/output |
| 腳位 34 | PB15 — General-purpose or alternate-function digital input/output |
| 腳位 35 | PA8 — General-purpose or alternate-function digital input/output |
| 腳位 36 | PA9 — General-purpose or alternate-function digital input/output |
| 腳位 37 | PA10 — General-purpose or alternate-function digital input/output |
| 腳位 38 | PA11 — General-purpose or USB alternate-function digital input/output |
| 腳位 39 | PA12 — General-purpose or USB alternate-function digital input/output |
| 腳位 40 | PA13 — General-purpose or debug alternate-function digital input/output |
| 腳位 41 | PA14 — General-purpose or debug alternate-function digital input/output |
| 腳位 42 | PA15 — General-purpose or debug alternate-function digital input/output |
| 腳位 43 | PB3 — General-purpose, JTAG, or alternate-function digital input/output |
| 腳位 44 | PB4 — General-purpose, NJTRST, or alternate-function digital input/output |
| 腳位 45 | PB5 — General-purpose or alternate-function digital input/output |
| 腳位 46 | PB6 — General-purpose or alternate-function digital input/output |
| 腳位 47 | PB7 — General-purpose or alternate-function digital input/output |
| 腳位 48 | BOOT0 — Boot mode selection input |
| 腳位 49 | PB8 — General-purpose or alternate-function digital input/output |
| 腳位 50 | PB9 — General-purpose or alternate-function digital input/output |
| 腳位 51 | PE2 — General-purpose or alternate-function digital input/output |
| 腳位 52 | PE3 — General-purpose or alternate-function digital input/output |
| 腳位 53 | PE4 — General-purpose or alternate-function digital input/output |
| 腳位 54 | PE5 — General-purpose or alternate-function digital input/output |
| 腳位 55 | PE6 — General-purpose or alternate-function digital input/output |
| 腳位 56 | PE7 — General-purpose or alternate-function digital input/output |
| 腳位 57 | PE0 — General-purpose or alternate-function digital input/output |
| 腳位 58 | PE1 — General-purpose or alternate-function digital input/output |
| 腳位 59 | VDD — Digital external supply input |
| 腳位 60 | VSS — Digital ground |
| 腳位 61 | PB10 — General-purpose or alternate-function digital input/output |
| 腳位 62 | PB11 — General-purpose or alternate-function digital input/output |
| 腳位 63 | VSS — Digital ground |
| 腳位 64 | VDD — Digital external supply input |
典型應用
STM32L422RBT6 適用於 6 應用s: USB-Connected Industrial Control, Battery-Powered Sensor Node, Portable Medical or Wellness Device, Compact Data Logger, Network Communications Module, Battery Management and Portable Power.
USB-Connected Industrial Control
The STM32L422RBT6 fits compact industrial controls that use USB for configuration, logging, or service connectivity. Its 80 MHz Arm Cortex-M4 core provides responsive control-loop execution, while the integrated FPU supports processing tasks that benefit from floating-point arithmetic. The 128 KB Flash stores application firmware, calibration data, and USB communication code without relying on an external program-memory device. In the controller, the MCU can supervise sensors and actuators, perform protocol handling, and record diagnostics while retaining the low-power characteristics of the STM32L4 family. The 64-LQFP package also leaves sufficient perimeter access for power, ground, communication, and control signals in a conventional industrial PCB layout.
推薦
Battery-Powered Sensor Node
The STM32L422RBT6 is appropriate for a battery-operated sensor node where a low-power MCU must still perform local filtering, sampling coordination, and data packaging. The 128 KB Flash provides space for firmware and configuration, and the 80 MHz Cortex-M4 core can execute sensor-processing routines without requiring a higher-performance processor. A typical implementation keeps the MCU in a low-energy state between samples, enables the sensor briefly, captures data, and then transmits through a duty-cycled radio. The principal battery-life trade-off is that radio and sensor loads may dominate MCU consumption, so the final energy budget must include every active interval and the chosen regulator's own quiescent behavior.
推薦
Portable Medical or Wellness Device
The STM32L422RBT6 can serve as the central controller in a portable medical or wellness device that combines sensor acquisition, local processing, and USB service connectivity. The Cortex-M4 with FPU supports responsive calculation at an 80 MHz clock rate, and the 128 KB Flash accommodates application code, calibration tables, and update buffers. A practical design uses low-power modes between measurements, carefully isolates USB power from the internal battery rail, and protects sensitive analog inputs from switching and USB-related noise. Because medical product requirements vary by device classification and intended use, qualification, software validation, and electrical safety assessment must be completed independently of the MCU selection.
推薦
Compact Data Logger
The STM32L422RBT6 fits a compact data logger that must store application state and communicate with a host while maintaining low standby power. Its 128 KB Flash can hold the logger firmware and configuration, while the 80 MHz Cortex-M4 core handles timestamps, sensor coordination, data compression, and USB transfer. The 64-LQFP package keeps the footprint manageable for a compact board, and its low-power architecture permits the MCU to remain mostly inactive between records. For sustained logging, the storage medium and write endurance become more important than CPU throughput. Engineers should also confirm that the chosen USB implementation, regulator, and external memory interface do not prevent the system from reaching the intended storage current target.
推薦
Network Communications Module
The STM32L422RBT6 is suitable for a low-power communications module that handles packet processing, configuration, and host diagnostics. Its 80 MHz Cortex-M4 core provides enough performance for protocol overhead and application processing, while USB connectivity offers a convenient configuration path. The 128 KB Flash can accommodate networking stacks, secure firmware components, and device-specific logic, although larger protocol stacks may require careful memory budgeting. Designers should partition USB, communications, and power-supply routing to limit interference, while placing decoupling close to supply pins. If the module includes Ethernet, the interface transceiver and magnetics remain external to the MCU, so their power consumption and thermal behavior must be included in the enclosure-level thermal and energy analysis.
推薦
Battery Management and Portable Power
The STM32L422RBT6 can act as the supervisory controller in a portable power system that measures operating state, controls loads, and provides USB service connectivity. Its Cortex-M4 core can supervise voltage and current measurements, update state machines, and coordinate charging or load behavior, while 128 KB Flash accommodates firmware and configuration data. The low-power STM32L4 architecture is useful when the system spends substantial time between active monitoring intervals. The MCU should not be assumed to perform final protection by itself: overvoltage, overcurrent, short-circuit, and thermal safeguards should remain in dedicated hardware. Firmware can add diagnostics, controlled shutdown, and fault logging, but the protection strategy must retain safe operation even when firmware is unresponsive.
推薦
推薦產品摘要
工程參考資料,適用於 STM32L422RBT6 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | STM32L422RBT7 | STM32L422RBT8 |
|---|---|---|---|
| Manufacturer | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 64-LQFP (10 mm x 10 mm) | 64-LQFP (10 mm x 10 mm) | 64-LQFP (10 mm x 10 mm) |
| Processor Core | Arm Cortex-M4 with FPU | Arm Cortex-M4 with FPU | Arm Cortex-M4 with FPU |
| Maximum CPU Frequency | 80 MHz | 80 MHz | 80 MHz |
| Flash Memory | 128 KB | 128 KB | 128 KB |
| Operating Supply Designation | 3.3 V | 3.3 V | 3.3 V |
| USB Support | Yes | Yes | Yes |
| Temperature Grade | -40 °C to +85 °C | -40 °C to +105 °C | -40 °C to +125 °C |
| Temperature-Range Difference | Baseline T6 grade | 20 °C higher upper-temperature rating | 40 °C higher upper-temperature rating |
| Pin Compatibility | 64-LQFP reference footprint | Pin-to-pin compatible | Pin-to-pin compatible |
主要差異化特點
- Maintains the same 80 MHz processing performance across the close replacement options (對比STM32L422RBT7)
- Preserves the same 128 KB Flash configuration (對比STM32L422RBT8)
- Uses the same PCB footprint for temperature-grade flexibility (對比STM32L422RBT7)
設計說明
Implement separate analog and digital supply paths as recommended in the STM32L422xx datasheet. Place the required VCAP1 capacitor at the designated pin with a short return path, and connect all VDD and VSS pins to their appropriate planes rather than leaving individual supplies unterminated. Use the manufacturer power-supply circuit as the starting point for startup sequencing and USB attachment. Validate the external regulator's transient response because an 80 MHz Cortex-M4 system can demand rapid current changes during instruction execution and interrupt servicing.
Follow the 64-LQFP 10 mm x 10 mm land pattern from the manufacturer package drawing and verify it against the PCB fabrication capabilities. Keep oscillator loops compact, maintain continuous ground beneath the device, and place decoupling capacitors close to the associated supply pins. Route USB D+ and D- as a controlled differential pair over a continuous reference plane. Review exposed pad, solder mask, and paste-stencil geometry if the selected board assembly process requires them.
Do not treat a matching STM32L4 family name as proof of drop-in compatibility. The T6, T7, and T8 suffixes identify different temperature grades, and production validation must confirm the electrical limits, package drawing, firmware behavior, qualification status, and availability of the selected suffix. Likewise, the VDD and VSS pins in the pin table are repeated across the 64-pin package; every required supply and ground connection must be routed and connected rather than treated as an optional duplicate.
Keep sensitive analog inputs away from USB, oscillator, and high-current switching paths, and connect analog ground using the topology shown in the manufacturer application guidance. Provide a clean VREF+ source with the required bypass arrangement and verify the input impedance of every connected sensor. For USB operation, use the datasheet's recommended series termination and controlled impedance routing, then validate signal integrity with the final enclosure, cable, connector, and power-supply configuration.
合規資訊
The manufacturer product page and datasheet confirm the device family and electrical identity but do not explicitly state the requested compliance declarations in the retrieved content.